From: Armin Obersteiner <armin@xos.net>
To: Douglas Gilbert <dougg@torque.net>
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
gibbs@scsiguy.com
Subject: Re: add-single-device won't work in 2.4.3
Date: Sun, 1 Apr 2001 18:01:25 +0200 [thread overview]
Message-ID: <20010401180125.A806@elch.elche> (raw)
In-Reply-To: <3AC5F115.B1B69883@torque.net>
In-Reply-To: <3AC5F115.B1B69883@torque.net>; from dougg@torque.net on Sat, Mar 31, 2001 at 10:00:37AM -0500
hi!
problem resolved: the first scsi adaptor is scsi1 NOT scsi0
as in <=2.4.2. so i did add/remove devices from a non existend
controller ...
thanks for posting your /proc/scsi/scsi, i compared it with
mine from 2.4.2 and voila!
i hope this is a "wanted" behavior ...
thanks for all your fast replies!
> $ uname -a
> Linux frig 2.4.3 #1 Fri Mar 30 16:33:45 EST 2001 i586 unknown
>
> $ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi1 Channel: 00 Id: 01 Lun: 00
> Vendor: IBM Model: DNES-309170W Rev: SA30
> Type: Direct-Access ANSI SCSI revision: 03
> Host: scsi2 Channel: 00 Id: 05 Lun: 00
> Vendor: UMAX Model: Astra 1220S Rev: V1.2
> Type: Scanner ANSI SCSI revision: 02
CU,
Armin Obersteiner
--
armin@xos.net pgp public key on request CU
next prev parent reply other threads:[~2001-04-01 16:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-31 15:00 add-single-device won't work in 2.4.3 Douglas Gilbert
2001-04-01 16:01 ` Armin Obersteiner [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-03-31 13:52 Armin Obersteiner
2001-03-31 15:07 ` Justin T. Gibbs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010401180125.A806@elch.elche \
--to=armin@xos.net \
--cc=dougg@torque.net \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox