From: Shane Wegner <shane@cm.nu>
To: Andre Hedrick <andre@linux-ide.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: ide.2.2.19.04092001.patch
Date: Thu, 12 Apr 2001 15:11:12 -0700 [thread overview]
Message-ID: <20010412151112.A17803@cm.nu> (raw)
In-Reply-To: <20010410223554.A938@cm.nu> <Pine.LNX.4.10.10104121505140.4564-100000@master.linux-ide.org>
In-Reply-To: <Pine.LNX.4.10.10104121505140.4564-100000@master.linux-ide.org>; from andre@linux-ide.org on Thu, Apr 12, 2001 at 03:05:53PM -0700
On Thu, Apr 12, 2001 at 03:05:53PM -0700, Andre Hedrick wrote:
>
> So you want a VIA-old and VIA-new ??
Hi,
Is the version of the driver in the latest IDE patch v4.x?
That's odd as that driver does work fine on Linux 2.4.3.
It's just the one in 2.2.19+ide.2.2.19.0405 which seems to
be locking up.
Best regards,
Shane
>
> On Tue, 10 Apr 2001, Shane Wegner wrote:
>
> > On Mon, Apr 09, 2001 at 05:33:13PM -0700, Andre Hedrick wrote:
> > >
> > > This is up with some updates
> > Hi,
> >
> > This isn't working here on my Abit VP6 board. The
> > ide.2.2.18.1221 works fine but this latest patch as well as
> > ide.2.2.19.0325 fails.
> >
> > Uniform Multi-Platform E-IDE driver Revision: 6.30
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: IDE controller on PCI bus 00 dev 39
> > VP_IDE: chipset revision 6
> > VP_IDE: not 100% native mode: will probe irqs later
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> > ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
> > ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
> > HPT370: IDE controller on PCI bus 00 dev 70
> > HPT370: chipset revision 3
> > HPT370: not 100% native mode: will probe irqs later
> > ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:pio, hdf:pio
> > ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio
> > hda: Maxtor 92720U8, ATA DISK drive
> > hdg: Maxtor 96147U8, ATA DISK drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide3 at 0xe400-0xe407,0xe802 on irq 10
> >
> > That's where it stops. Locks solid, not even sysrq-b
> > works.
> >
> > Shane
> >
> > --
> > Shane Wegner: shane@cm.nu
> > http://www.cm.nu/~shane/
> > PGP: 1024D/FFE3035D
> > A0ED DAC4 77EC D674 5487
> > 5B5C 4F89 9A4E FFE3 035D
> >
>
> Andre Hedrick
> Linux ATA Development
> ASL Kernel Development
> -----------------------------------------------------------------------------
> ASL, Inc. Toll free: 1-877-ASL-3535
> 1757 Houret Court Fax: 1-408-941-2071
> Milpitas, CA 95035 Web: www.aslab.com
--
Shane Wegner: shane@cm.nu
http://www.cm.nu/~shane/
PGP: 1024D/FFE3035D
A0ED DAC4 77EC D674 5487
5B5C 4F89 9A4E FFE3 035D
next prev parent reply other threads:[~2001-04-12 22:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-10 0:33 ide.2.2.19.04092001.patch Andre Hedrick
2001-04-10 19:23 ` (ide.2.2.19.04092001.patch:) DiskPerf compile problem Gunther Mayer
2001-04-12 22:03 ` Andre Hedrick
2001-04-11 5:35 ` ide.2.2.19.04092001.patch Shane Wegner
2001-04-11 5:46 ` ide.2.2.19.04092001.patch William Park
2001-04-12 22:05 ` ide.2.2.19.04092001.patch Andre Hedrick
2001-04-12 22:11 ` Shane Wegner [this message]
2001-04-12 22:19 ` ide.2.2.19.04092001.patch Andre Hedrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010412151112.A17803@cm.nu \
--to=shane@cm.nu \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox