From: Mike Panetta <mpanetta@applianceware.com>
To: linux-kernel@vger.kernel.org
Subject: HPT366 IDE DMA error question.
Date: Thu, 26 Apr 2001 13:18:46 -0700 [thread overview]
Message-ID: <20010426131846.A29148@tetsuo.applianceware.com> (raw)
What could cause this error?
hdi: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hdi: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hdi: DMA disabled
ide4: reset: success
I get this message on all my off board HPT366 based controller
cards. I am using these cards with seagate Barracuda ATA III
Model ST320414A 20GB drives. Are there any known issues with
these drives and the HPT366 based controllers? Are there any
known issues with using 2-3 HPT366 cards in one system? There
is only 1 drive per channel (2 per card). I am using this setup
with Software RAID and needless to say no DMA=slow as hell.
Just so you know the onboard IDE controller works fine. The
drives report no errors on the onboard controllers and they
have UDMA enabled (it was not disabled by the kernel).
If there is any other info that is needed I will be glad
to provide it.
Thanks,
Mike
--
next reply other threads:[~2001-04-26 20:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-26 20:18 Mike Panetta [this message]
2001-04-27 17:29 ` HPT366 IDE DMA error question Tim Hockin
2001-04-27 23:46 ` [PATCH] hpt366.c, *bad_ata66_4 additions (2.2.19 + ide.2.2.19.04092001.patch) Tim Moore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010426131846.A29148@tetsuo.applianceware.com \
--to=mpanetta@applianceware.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox