From: "H . J . Lu" <hjl@lucon.org>
To: Jeff Garzik <jgarzik@mandrakesoft.com>
Cc: "Mads Martin Jørgensen" <mmj@suse.com>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
"Manfred Spraul" <manfred@colorfullife.com>,
"Yann Dupont" <Yann.Dupont@IPv6.univ-nantes.fr>,
"Alan Cox" <alan@lxorguk.ukuu.org.uk>
Subject: PATCH 2.4.4.ac9: BOOTP/DHCP
Date: Mon, 14 May 2001 12:57:06 -0700 [thread overview]
Message-ID: <20010514125706.A26901@lucon.org> (raw)
On Mon, May 14, 2001 at 12:02:48PM -0700, H . J . Lu wrote:
>
> BTW, I cannot select both CONFIG_IP_PNP_DHCP and CONFIG_IP_PNP_BOOTP.
> BOOTP doesn' work even if I pass "ip=bootp" to kernel. I will take
> a look.
>
>
Here is a patch. We should do DHCP iff it is enabled.
H.J.
--- linux-2.4.4-ac9/net/ipv4/ipconfig.c.auto Mon May 14 12:18:18 2001
+++ linux-2.4.4-ac9/net/ipv4/ipconfig.c Mon May 14 12:52:51 2001
@@ -816,61 +816,63 @@ static int __init ic_bootp_recv(struct s
u8 *ext;
#ifdef IPCONFIG_DHCP
+ if (ic_proto_enabled & IC_USE_DHCP) {
- u32 server_id = INADDR_NONE;
- int mt = 0;
+ u32 server_id = INADDR_NONE;
+ int mt = 0;
- ext = &b->exten[4];
- while (ext < end && *ext != 0xff) {
- u8 *opt = ext++;
- if (*opt == 0) /* Padding */
- continue;
- ext += *ext + 1;
- if (ext >= end)
- break;
- switch (*opt) {
- case 53: /* Message type */
- if (opt[1])
- mt = opt[2];
- break;
- case 54: /* Server ID (IP address) */
- if (opt[1] >= 4)
- memcpy(&server_id, opt + 2, 4);
- break;
+ ext = &b->exten[4];
+ while (ext < end && *ext != 0xff) {
+ u8 *opt = ext++;
+ if (*opt == 0) /* Padding */
+ continue;
+ ext += *ext + 1;
+ if (ext >= end)
+ break;
+ switch (*opt) {
+ case 53: /* Message type */
+ if (opt[1])
+ mt = opt[2];
+ break;
+ case 54: /* Server ID (IP address) */
+ if (opt[1] >= 4)
+ memcpy(&server_id, opt + 2, 4);
+ break;
+ }
}
- }
#ifdef IPCONFIG_DEBUG
- printk("DHCP: Got message type %d\n", mt);
+ printk("DHCP: Got message type %d\n", mt);
#endif
- switch (mt) {
- case DHCPOFFER:
- /* While in the process of accepting one offer,
- ignore all others. */
- if (ic_myaddr != INADDR_NONE)
- goto drop;
- /* Let's accept that offer. */
- ic_myaddr = b->your_ip;
- ic_servaddr = server_id;
+ switch (mt) {
+ case DHCPOFFER:
+ /* While in the process of accepting one offer,
+ ignore all others. */
+ if (ic_myaddr != INADDR_NONE)
+ goto drop;
+ /* Let's accept that offer. */
+ ic_myaddr = b->your_ip;
+ ic_servaddr = server_id;
#ifdef IPCONFIG_DEBUG
- printk("DHCP: Offered address %u.%u.%u.%u", NIPQUAD(ic_myaddr));
- printk(" by server %u.%u.%u.%u\n", NIPQUAD(ic_servaddr));
+ printk("DHCP: Offered address %u.%u.%u.%u", NIPQUAD(ic_myaddr));
+ printk(" by server %u.%u.%u.%u\n", NIPQUAD(ic_servaddr));
#endif
- break;
+ break;
- case DHCPACK:
- /* Yeah! */
- break;
-
- default:
- /* Urque. Forget it*/
- ic_myaddr = INADDR_NONE;
- ic_servaddr = INADDR_NONE;
- goto drop;
- }
+ case DHCPACK:
+ /* Yeah! */
+ break;
+
+ default:
+ /* Urque. Forget it*/
+ ic_myaddr = INADDR_NONE;
+ ic_servaddr = INADDR_NONE;
+ goto drop;
+ }
- ic_dhcp_msgtype = mt;
+ ic_dhcp_msgtype = mt;
+ }
#endif /* IPCONFIG_DHCP */
reply other threads:[~2001-05-14 19:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010514125706.A26901@lucon.org \
--to=hjl@lucon.org \
--cc=Yann.Dupont@IPv6.univ-nantes.fr \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jgarzik@mandrakesoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manfred@colorfullife.com \
--cc=mmj@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox