From: "Joshua Corbin" <jcorbin@linuxmail.org>
To: linux-kernel@vger.kernel.org
Subject: FIC AD11(AMD 761/VIA 686B) AGP port not supported
Date: Fri, 18 May 2001 22:21:09 +0800 [thread overview]
Message-ID: <20010518142110.29102.qmail@linuxmail.org> (raw)
The Motherboard is a FIC AD11(AMD 761/VIA 686B chipset). Vid-card is a radeon 32M ddr model.
Whenever I startx with the radeon driver, the machine hangs, forced to use reset switch, not even C-A-Del works. But with the generic vga driver I get all of 16 colors at less than 640x480.
Here are relevant dmesg lines:
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Unsupported AMD chipset (device id: 700e), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
What does agp_try_unsupported mean? Where do I set this setting?
and relevant lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700e (rev 12)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 set
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e3100000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=15 SBA+ 64bit- FW+ Rate=421
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=
00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 700f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
Also attached are the full dmesg and lspci output.
Please help, as it is I am force to use windows to get anything done (that too needed updated drivers before it would work properly).
Thanks in advance -- Josh
--
Get your free email from www.linuxmail.org
Powered by Outblaze
next reply other threads:[~2001-05-18 14:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-18 14:21 Joshua Corbin [this message]
2001-05-18 15:33 ` FIC AD11(AMD 761/VIA 686B) AGP port not supported Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010518142110.29102.qmail@linuxmail.org \
--to=jcorbin@linuxmail.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox