From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 18 May 2001 10:21:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 18 May 2001 10:21:35 -0400 Received: from 202-123-209-152.outblaze.com ([202.123.209.152]:22461 "EHLO mg.hk5.outblaze.com") by vger.kernel.org with ESMTP id ; Fri, 18 May 2001 10:21:19 -0400 Message-ID: <20010518142110.29102.qmail@linuxmail.org> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit Mime-Version: 1.0 X-Mailer: MIME-tools 4.104 (Entity 4.117) From: "Joshua Corbin" To: linux-kernel@vger.kernel.org Date: Fri, 18 May 2001 22:21:09 +0800 Subject: FIC AD11(AMD 761/VIA 686B) AGP port not supported Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The Motherboard is a FIC AD11(AMD 761/VIA 686B chipset). Vid-card is a radeon 32M ddr model. Whenever I startx with the radeon driver, the machine hangs, forced to use reset switch, not even C-A-Del works. But with the generic vga driver I get all of 16 colors at less than 640x480. Here are relevant dmesg lines: agpgart: Maximum main memory to use for agp memory: 94M agpgart: Unsupported AMD chipset (device id: 700e), you might want to try agp_try_unsupported=1. agpgart: no supported devices found. What does agp_try_unsupported mean? Where do I set this setting? and relevant lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700e (rev 12) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Also attached are the full dmesg and lspci output. Please help, as it is I am force to use windows to get anything done (that too needed updated drivers before it would work properly). Thanks in advance -- Josh -- Get your free email from www.linuxmail.org Powered by Outblaze