Re: ide retry on 2.4.5-ac7

[Jens Axboe <axboe@suse.de>]

On Mon, Jun 04 2001, PROFETA Mickael wrote:
> On Mon, Jun 04, 2001 at 10:14:04PM +0200, Jens Axboe wrote:
> > 
> > It worked sucessfully for you in 2.4.5-ac4 but not in -ac7? I can't see
> > any changes to the patch, so more details on the nature of the problem
> > would be helpful.
> 
> Ok, this is the results of a hdparm -tT on my second hard disk:
> 
> hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide1: reset: success
> 64 MB in  7.03 seconds =  9.10 MB/sec
> 
> and then the kernel has shifted to udma3 and I have no more error in this
> session with that hard disk
> 
> I tried the same thing on -ac7 and I always have the errors, the kernel does
> not reset ide... Looking at the different change on ac patches, I can not see 
> why...

This is not the case that is attempted solve. The above could be a cable
error (it looks like it). These are usually genuine and indicate a real
hw problem.

-- 
Jens Axboe