From: "Delio Brignoli" <nordkyn@tin.it>
To: linux-kernel@vger.kernel.org
Subject: i810 audio problem
Date: Mon, 18 Jun 2001 14:17:15 +0200 [thread overview]
Message-ID: <20010618141715.A534@argo.tin.it> (raw)
Switching from 2.4.2 to 2.4.5 breaks i810_audio on my intel MX440 based notebook:
After some (in fact a few) seconds of playback it gets stuck until the app closes and reopens /dev/dsp. (I do NOT use esd)
I tried 2.4.4 and 2.4.5 (and the ac patches on both) but it does't work anyway.
Jun 18 13:45:50 argo kernel: Intel 810 + AC97 Audio, version 0.03, 13:40:09 Jun 18 2001
Jun 18 13:45:50 argo kernel: PCI: Setting latency timer of device 00:00.1 to 64
Jun 18 13:45:50 argo kernel: i810: Intel 440MX found at IO 0x1500 and 0x1600, IRQ 5
Jun 18 13:45:50 argo kernel: ac97_codec: AC97 Audio codec, id: 0x4352:0x5934 (Cirrus Logic CS4299 rev D)
Jun 18 13:45:50 argo kernel: i810_audio: called i810_set_dac_rate : rate = 48000/48000
Jun 18 13:45:50 argo kernel: i810_audio: allocated 65536 (order = 4) bytes at cb660000
Jun 18 13:45:50 argo kernel: i810_audio: prog_dmabuf, sample rate = 48000, format = 3,
Jun 18 13:45:50 argo kernel: ^Inumfrag = 32, fragsize = 2048 dmasize = 65536
Jun 18 13:45:50 argo kernel: i810_audio: 17768 bytes in 50 milliseconds
Jun 18 13:45:50 argo kernel: i810_audio: setting clocking to 25934
Jun 18 13:58:06 argo kernel: i810_audio: called i810_set_dac_rate : rate = 14806/8000
[snip]
Here starts the playback
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0x0, cmd=SNDCTL_DSP_RESET
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0x20000c, cmd=SNDCTL_DSP_SETFRAGMENT 0x10000, 4096, 16
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0x10, cmd=SNDCTL_DSP_SETFMT
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0x10, cmd=SNDCTL_DSP_SETFMT
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0x1, cmd=SNDCTL_DSP_STEREO
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0xac44, cmd=SNDCTL_DSP_SPEED
Jun 18 13:58:06 argo kernel: i810_audio: called i810_set_dac_rate : rate = 40811/22050
Jun 18 13:58:06 argo kernel: i810_audio: i810_ioctl, arg=0x0, cmd=i810_audio: allocated 65536 (order = 4) bytes at c7880000
Jun 18 13:58:06 argo kernel: i810_audio: prog_dmabuf, sample rate = 40811, format = 3,
Jun 18 13:58:06 argo kernel: ^Inumfrag = 32, fragsize = 2048 dmasize = 65536
Jun 18 13:58:06 argo kernel: SNDCTL_DSP_GETBLKSIZE 4096
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: i810_ioctl, arg=0x0, cmd=SNDCTL_DSP_GETOSPACE 61748, 4096, 15, 16
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: i810_ioctl, arg=0xf, cmd=SNDCTL_DSP_GETOSPACE 60080, 4096, 14, 16
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: i810_ioctl, arg=0xe, cmd=SNDCTL_DSP_GETOSPACE 56340, 4096, 13, 16
[snip]
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: i810_ioctl, arg=0x1, cmd=SNDCTL_DSP_GETOSPACE 3732, 4096, 0, 16
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: i810_ioctl, arg=0x0, cmd=SNDCTL_DSP_GETOSPACE 4074, 4096, 0, 16
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: i810_ioctl, arg=0x0, cmd=SNDCTL_DSP_GETOSPACE 286, 4096, 0, 16
Jun 18 13:58:07 argo kernel: i810_audio: i810_write called, count = 3788
Jun 18 13:58:07 argo kernel: i810_audio: playback schedule timeout, dmasz 65536 fragsz 2048 count 65536 hwptr 4294842946 swptr 6722
Jun 18 13:58:38 argo last message repeated 77 times
Jun 18 13:59:39 argo last message repeated 152 times
Jun 18 13:59:40 argo last message repeated 4 times
It goes on until I kill the app, then it says:
Jun 18 13:59:42 argo kernel: i810_audio: drain_dac, dma timeout?
Any idea(s), suggestions ...
Thank you
--
Delio
next reply other threads:[~2001-06-18 12:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-18 12:17 Delio Brignoli [this message]
2001-06-19 1:27 ` i810 audio problem Michael
2001-06-19 7:57 ` Delio Brignoli
[not found] <20010619.222014.-149693.3.fdavis112@juno.com>
[not found] ` <3B300A94.2082D61A@cwo.com.au>
2001-06-20 15:23 ` i810_audio problem Delio Brignoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010618141715.A534@argo.tin.it \
--to=nordkyn@tin.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox