From: ppetru@ppetru.net (Petru Paler)
To: linux-kernel@vger.kernel.org
Subject: Megaraid trouble in 2.4.8-pre and 2.4.7-ac
Date: Sat, 4 Aug 2001 15:27:15 -0700 [thread overview]
Message-ID: <20010804152714.C466@ppetru.net> (raw)
Hi,
I get this:
megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
PCI: Found IRQ 5 for device 01:02.0
megaraid: found 0x101e:0x1960:idx 0:bus 1:slot 2:func 0
scsi0 : Found a MegaRAID controller at 0xf8802000, IRQ: 5
scsi0 : Enabling 64 bit support
megaraid: [l148:3.11] detected 1 logical drives
megaraid: channel[1] is raid.
scsi0 : AMI MegaRAID l148 254 commands 16 targs 1 chans 40 luns
scsi0: scanning channel 1 for devices.
scsi0: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID5 35254R Rev: l148
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 1, id 0, lun 0
Partition check:
sda:scsi : aborting command due to timeout : pid 0, scsi0, channel 1, id 0, lun 0 Read (10) 00 00 00 00 00 00 00 02 00
when trying to boot 2.4.8-pre4 or 2.4.7-ac5, then the machine hangs.
2.4.7 works fine.
Any ideeas?
Petru
reply other threads:[~2001-08-04 22:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010804152714.C466@ppetru.net \
--to=ppetru@ppetru.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox