* Megaraid trouble in 2.4.8-pre and 2.4.7-ac
@ 2001-08-04 22:27 Petru Paler
0 siblings, 0 replies; only message in thread
From: Petru Paler @ 2001-08-04 22:27 UTC (permalink / raw)
To: linux-kernel
Hi,
I get this:
megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
PCI: Found IRQ 5 for device 01:02.0
megaraid: found 0x101e:0x1960:idx 0:bus 1:slot 2:func 0
scsi0 : Found a MegaRAID controller at 0xf8802000, IRQ: 5
scsi0 : Enabling 64 bit support
megaraid: [l148:3.11] detected 1 logical drives
megaraid: channel[1] is raid.
scsi0 : AMI MegaRAID l148 254 commands 16 targs 1 chans 40 luns
scsi0: scanning channel 1 for devices.
scsi0: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID5 35254R Rev: l148
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 1, id 0, lun 0
Partition check:
sda:scsi : aborting command due to timeout : pid 0, scsi0, channel 1, id 0, lun 0 Read (10) 00 00 00 00 00 00 00 02 00
when trying to boot 2.4.8-pre4 or 2.4.7-ac5, then the machine hangs.
2.4.7 works fine.
Any ideeas?
Petru
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-08-04 22:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-08-04 22:27 Megaraid trouble in 2.4.8-pre and 2.4.7-ac Petru Paler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox