From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 4 Aug 2001 18:28:27 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 4 Aug 2001 18:28:18 -0400 Received: from dnai-216-15-62-124.cust.dnai.com ([216.15.62.124]:20172 "HELO soni.ppetru.net") by vger.kernel.org with SMTP id ; Sat, 4 Aug 2001 18:28:11 -0400 Date: Sat, 4 Aug 2001 15:27:15 -0700 To: linux-kernel@vger.kernel.org Subject: Megaraid trouble in 2.4.8-pre and 2.4.7-ac Message-ID: <20010804152714.C466@ppetru.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.20i From: ppetru@ppetru.net (Petru Paler) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I get this: megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001) PCI: Found IRQ 5 for device 01:02.0 megaraid: found 0x101e:0x1960:idx 0:bus 1:slot 2:func 0 scsi0 : Found a MegaRAID controller at 0xf8802000, IRQ: 5 scsi0 : Enabling 64 bit support megaraid: [l148:3.11] detected 1 logical drives megaraid: channel[1] is raid. scsi0 : AMI MegaRAID l148 254 commands 16 targs 1 chans 40 luns scsi0: scanning channel 1 for devices. scsi0: scanning virtual channel for logical drives. Vendor: MegaRAID Model: LD0 RAID5 35254R Rev: l148 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 1, id 0, lun 0 Partition check: sda:scsi : aborting command due to timeout : pid 0, scsi0, channel 1, id 0, lun 0 Read (10) 00 00 00 00 00 00 00 02 00 when trying to boot 2.4.8-pre4 or 2.4.7-ac5, then the machine hangs. 2.4.7 works fine. Any ideeas? Petru