From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 20 Aug 2001 12:21:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 20 Aug 2001 12:21:44 -0400 Received: from cp26357-a.gelen1.lb.nl.home.com ([213.51.0.86]:11896 "HELO lunchbox.oisec.net") by vger.kernel.org with SMTP id ; Mon, 20 Aug 2001 12:21:31 -0400 Date: Mon, 20 Aug 2001 18:21:38 +0200 From: Cliff Albert To: Alan Cox Cc: Yusuf Goolamabbas , linux-kernel@vger.kernel.org, gibbs@scsiguy.com Subject: Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo Message-ID: <20010820182138.C26054@oisec.net> In-Reply-To: <20010820105520.A22087@oisec.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.20i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Aug 20, 2001 at 11:37:33AM +0100, Alan Cox wrote: > > > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I > > > compile with APIC enabled and APIC on UP also enabled, it boots > > > cleanly > > > > I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using > > the NEW AIC7xxx driver, the old isn't experiencing these problems. Further > > i've been getting these errors since 2.4.3. > > There is a known BIOS irq routing table problem with a large number of Intel > BIOS boards with onboard adaptec controllers. The fact that making it use > the io-apic works suggest this is the same thing. It's an ASUS P2B-S board with a Award Bios, flashed to the latest revision that is available from ASUS -- Cliff Albert | RIPE: CA3348-RIPE | www.oisec.net cliff@oisec.net | 6BONE: CA2-6BONE | icq 18461740