From: Yusuf Goolamabbas <yusufg@outblaze.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Cliff Albert <cliff@oisec.net>,
linux-kernel@vger.kernel.org, gibbs@scsiguy.com
Subject: Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo
Date: Mon, 20 Aug 2001 18:56:56 +0800 [thread overview]
Message-ID: <20010820185656.A17435@outblaze.com> (raw)
In-Reply-To: <20010820105520.A22087@oisec.net> <E15YmR3-0005mb-00@the-village.bc.nu>
In-Reply-To: <E15YmR3-0005mb-00@the-village.bc.nu>; from alan@lxorguk.ukuu.org.uk on Mon, Aug 20, 2001 at 11:37:33AM +0100
> > > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I
> > > compile with APIC enabled and APIC on UP also enabled, it boots
> > > cleanly
> >
> > I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> > the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> > i've been getting these errors since 2.4.3.
>
> There is a known BIOS irq routing table problem with a large number of Intel
> BIOS boards with onboard adaptec controllers. The fact that making it use
> the io-apic works suggest this is the same thing.
But 2.4.8 and 2.4.9 work without using io-apic.
--
Yusuf Goolamabbas
yusufg@outblaze.com
next prev parent reply other threads:[~2001-08-20 10:46 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-20 8:36 aic7xxx errors with 2.4.8-ac7 on 440gx mobo Yusuf Goolamabbas
2001-08-20 8:55 ` Cliff Albert
2001-08-20 10:37 ` Alan Cox
2001-08-20 10:56 ` Yusuf Goolamabbas [this message]
2001-08-20 10:56 ` Alan Cox
2001-08-20 11:13 ` Yusuf Goolamabbas
2001-08-20 11:09 ` Alan Cox
2001-08-20 16:43 ` Doug Ledford
2001-08-20 12:46 ` Stefan Fleiter
2001-08-20 15:19 ` Ville Herva
2001-08-20 20:33 ` Justin T. Gibbs
2001-08-20 16:45 ` Doug Ledford
2001-08-20 17:23 ` Stefan Fleiter
2001-08-20 20:28 ` Justin T. Gibbs
2001-08-21 20:24 ` Stefan Fleiter
2001-08-20 16:21 ` Cliff Albert
2001-08-20 17:23 ` Peter T. Breuer
2001-08-20 17:28 ` Cliff Albert
2001-08-20 20:27 ` Justin T. Gibbs
2001-08-20 20:45 ` Cliff Albert
2001-08-20 21:04 ` Cliff Albert
2001-08-20 21:09 ` Cliff Albert
2001-08-20 21:45 ` Justin T. Gibbs
2001-08-20 22:36 ` aic7xxx with 2.4.9 on 7899P Sven Heinicke
2001-08-21 14:42 ` With Daniel Phillips Patch (was: aic7xxx with 2.4.9 on 7899P) Sven Heinicke
2001-08-21 15:08 ` Daniel Phillips
2001-08-21 16:48 ` Sven Heinicke
2001-08-21 17:18 ` Justin T. Gibbs
2001-08-21 22:49 ` Sven Heinicke
2001-08-22 13:06 ` Gérard Roudier
2001-08-21 17:26 ` Daniel Phillips
2001-08-21 17:55 ` Stephan von Krawczynski
2001-08-21 18:33 ` Justin T. Gibbs
2001-08-22 6:46 ` Jens Axboe
2001-08-22 13:24 ` Justin T. Gibbs
2001-08-22 15:05 ` With Daniel Phillips Patch David S. Miller
2001-08-22 18:21 ` Gérard Roudier
2001-08-22 18:32 ` David S. Miller
2001-08-22 18:32 ` Justin T. Gibbs
2001-08-22 18:46 ` David S. Miller
2001-08-22 19:41 ` Justin T. Gibbs
2001-08-22 20:19 ` David S. Miller
2001-08-22 21:07 ` Gérard Roudier
2001-08-22 21:14 ` David S. Miller
2001-08-22 21:14 ` David S. Miller
2001-08-22 21:40 ` Justin T. Gibbs
2001-08-22 23:09 ` David S. Miller
2001-08-23 0:01 ` Justin T. Gibbs
2001-08-23 0:40 ` David S. Miller
2001-08-23 0:55 ` Justin T. Gibbs
2001-08-23 1:03 ` Matthew Jacob
2001-08-23 1:08 ` David S. Miller
2001-08-23 1:32 ` Justin T. Gibbs
2001-08-23 1:39 ` David S. Miller
2001-08-23 1:49 ` Justin T. Gibbs
2001-08-21 22:44 ` With Daniel Phillips Patch (was: aic7xxx with 2.4.9 on 7899P) Sven Heinicke
2001-08-22 0:58 ` Daniel Phillips
2001-08-22 10:25 ` Marcelo Tosatti
2001-08-22 16:09 ` Sven Heinicke
2001-08-22 15:42 ` Marcelo Tosatti
2001-08-22 20:25 ` Sven Heinicke
2001-08-29 7:30 ` Andrey Nekrasov
2001-09-03 14:58 ` Marcelo Tosatti
2001-08-20 22:55 ` aic7xxx errors with 2.4.8-ac7 on 440gx mobo Cliff Albert
2001-08-21 0:36 ` Justin T. Gibbs
2001-08-21 15:34 ` Gérard Roudier
2001-08-20 21:44 ` Justin T. Gibbs
2001-08-20 21:48 ` Cliff Albert
2001-08-25 7:15 ` Cliff Albert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010820185656.A17435@outblaze.com \
--to=yusufg@outblaze.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=cliff@oisec.net \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox