From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 20 Aug 2001 06:46:47 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 20 Aug 2001 06:46:38 -0400 Received: from [203.161.228.202] ([203.161.228.202]:56332 "EHLO spf1.hq.outblaze.com") by vger.kernel.org with ESMTP id ; Mon, 20 Aug 2001 06:46:22 -0400 Date: Mon, 20 Aug 2001 18:56:56 +0800 From: Yusuf Goolamabbas To: Alan Cox Cc: Cliff Albert , linux-kernel@vger.kernel.org, gibbs@scsiguy.com Subject: Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo Message-ID: <20010820185656.A17435@outblaze.com> In-Reply-To: <20010820105520.A22087@oisec.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from alan@lxorguk.ukuu.org.uk on Mon, Aug 20, 2001 at 11:37:33AM +0100 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org > > > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I > > > compile with APIC enabled and APIC on UP also enabled, it boots > > > cleanly > > > > I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using > > the NEW AIC7xxx driver, the old isn't experiencing these problems. Further > > i've been getting these errors since 2.4.3. > > There is a known BIOS irq routing table problem with a large number of Intel > BIOS boards with onboard adaptec controllers. The fact that making it use > the io-apic works suggest this is the same thing. But 2.4.8 and 2.4.9 work without using io-apic. -- Yusuf Goolamabbas yusufg@outblaze.com