From: Christopher Ruehl <ruehlc@europe.com>
To: linux-kernel@vger.kernel.org
Subject: usb_control/bulk_msg
Date: Fri, 31 Aug 2001 09:36:41 +0200 [thread overview]
Message-ID: <20010831093641.A1257@pegasus> (raw)
! PLEASE CC to me i'am not registered to this list
i'll try to use the usb-storage with my Sony DSC
but since kernel version 2.4.7 it's seems to be brocken.
look like a problem with the interrupt handling with the
usb-uhci which shares it's interupt with the sym53c8xx driver.
i use a 'dualhead' SCSI controller from DIGIAL with
two 53c875 chipset.
any idea?
cheers
chris ruehl
info follows:
$PCI Status for kernel: Linux 2.4.9-ac5 i686
$PCI up; bus count is 3
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 16)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
00:0b.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
02:00.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 04)
02:01.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 04)
02:02.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
$USB Status for kernel: Linux 2.4.9-ac5 i686
$USB up; bus count is 1
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e000
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
Aug 31 09:15:14 pegasus kernel: Initializing USB Mass Storage driver...
Aug 31 09:15:14 pegasus kernel: usb.c: registered new driver usb-storage
Aug 31 09:15:14 pegasus kernel: USB Mass Storage support registered.
Aug 31 09:15:35 pegasus kernel: hub.c: USB new device connect on bus1/2, assigned device number 2
Aug 31 09:15:35 pegasus kernel: Manufacturer: Sony
Aug 31 09:15:35 pegasus kernel: Product: Sony DSC
Aug 31 09:15:36 pegasus kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Aug 31 09:15:36 pegasus kernel: Vendor: Sony Model: Sony DSC Rev: 2.10
Aug 31 09:15:36 pegasus kernel: Type: Direct-Access ANSI SCSI revision: 02
Aug 31 09:15:38 pegasus kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 0
Aug 31 09:15:39 pegasus kernel: SCSI device sdc: 126848 512-byte hdwr sectors (65 MB)
Aug 31 09:15:39 pegasus kernel: usb-uhci.c: interrupt, status 3, frame# 1033
Aug 31 09:15:39 pegasus kernel: usb_control/bulk_msg: timeout
[root@pegasus chris]# cat /proc/interrupts
CPU0
0: 139465 XT-PIC timer
1: 3326 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 8 XT-PIC eth0
8: 1 XT-PIC rtc
10: 7816 XT-PIC sym53c8xx
11: 102 XT-PIC sym53c8xx, usb-uhci
12: 22185 XT-PIC PS/2 Mouse
15: 7896 XT-PIC HiSax
NMI: 0
ERR: 0
--
""""
Linux, O O we work on it!
( help the commnuity and find the BUGS.
+__/
next reply other threads:[~2001-08-31 7:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-31 7:36 Christopher Ruehl [this message]
2001-08-31 7:46 ` usb_control/bulk_msg Greg KH
2001-08-31 19:18 ` usb_control/bulk_msg Christopher Ruehl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010831093641.A1257@pegasus \
--to=ruehlc@europe.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox