* 0-order allocation failed in 2.4.10-pre8
@ 2001-09-14 18:38 J
2001-09-14 18:48 ` kelley eicher
0 siblings, 1 reply; 7+ messages in thread
From: J @ 2001-09-14 18:38 UTC (permalink / raw)
To: linux-kernel; +Cc: keicher
[-- Attachment #1: Type: text/plain, Size: 815 bytes --]
Hello,
I am reporting the same problem that kelley eicher
has, "0-order allocation failed (gfp=0x70/1)", hopefully
my info is helpfull. I added BUG() after the printk's in
"mm/page_alloc.c:505". I am able to get this message
when ever I copy a large (2+ gig) file from one XFS filesystem
to another on the same disk controller. I have attached klogd -p output
and an output of /proc/slabinfo from <= 1 second before the
Oops. If anyone would like more info, or for me to apply dangerous
patches, or to shut up even, let me know.
Jack
Machine:
Kernel Version 2.4.10-pre8 with SGI-XFS patches and IBM-JFS patches.
compiled with egcs 2.91-66 ;) (Some more info @ http://whatevr.i2net.com)
SMP P3 Box with 2 Gig of memory
Disk controller that helps to get this message: cpqarray (Smart Array
3200 with 6 disks)
[-- Attachment #2: slabinfo --]
[-- Type: text/plain, Size: 5379 bytes --]
slabinfo - version: 1.1 (SMP)
kmem_cache 96 96 244 6 6 1 : 252 126
ip_fib_hash 25 226 32 2 2 1 : 252 126
fib6_nodes 5 226 32 2 2 1 : 252 126
ip6_dst_cache 11 40 192 2 2 1 : 252 126
ndisc_cache 1 30 128 1 1 1 : 252 126
ip_mrt_cache 0 0 96 0 0 1 : 252 126
tcp_tw_bucket 60 60 128 2 2 1 : 252 126
tcp_bind_bucket 6 226 32 2 2 1 : 252 126
tcp_open_request 40 40 96 1 1 1 : 252 126
inet_peer_cache 1 59 64 1 1 1 : 252 126
ip_dst_cache 120 120 192 6 6 1 : 252 126
arp_cache 60 60 128 2 2 1 : 252 126
urb_priv 0 0 64 0 0 1 : 252 126
hpsb_packet 0 0 96 0 0 1 : 252 126
blkdev_requests 1280 1280 96 32 32 1 : 252 126
xfs_chashlist 863 1010 16 5 5 1 : 252 126
xfs_ili 1008 1008 136 36 36 1 : 252 126
xfs_ifork 0 0 56 0 0 1 : 252 126
xfs_efi_item 15 15 260 1 1 1 : 124 62
xfs_efd_item 15 15 260 1 1 1 : 124 62
xfs_buf_item 104 104 148 4 4 1 : 252 126
xfs_dabuf 202 202 16 1 1 1 : 252 126
xfs_da_state 22 22 340 2 2 1 : 124 62
xfs_trans 129 132 320 11 11 1 : 124 62
xfs_inode 7706 9160 468 1140 1145 1 : 124 62
xfs_btree_cur 28 28 140 1 1 1 : 252 126
xfs_bmap_free_item 202 202 16 1 1 1 : 252 126
page_buf_t 300 300 192 15 15 1 : 252 126
page_buf_reg_t 7 80 96 2 2 1 : 252 126
avl_object_t 7 226 32 2 2 1 : 252 126
avl_entry_t 273 565 32 5 5 1 : 252 126
nfs_read_data 0 0 384 0 0 1 : 124 62
nfs_write_data 0 0 384 0 0 1 : 124 62
nfs_page 0 0 96 0 0 1 : 252 126
dnotify cache 0 0 20 0 0 1 : 252 126
file lock cache 84 84 92 2 2 1 : 252 126
fasync cache 0 0 16 0 0 1 : 252 126
uid_cache 2 226 32 2 2 1 : 252 126
skbuff_head_cache 209 240 160 10 10 1 : 252 126
sock 32 32 928 8 8 1 : 124 62
sigqueue 29 29 132 1 1 1 : 252 126
cdev_cache 118 118 64 2 2 1 : 252 126
bdev_cache 16 118 64 2 2 1 : 252 126
mnt_cache 19 118 64 2 2 1 : 252 126
inode_cache 8408 13096 480 1637 1637 1 : 124 62
dentry_cache 1929 14370 128 479 479 1 : 252 126
dquot 0 0 96 0 0 1 : 252 126
filp 359 400 96 10 10 1 : 252 126
names_cache 3 3 4096 3 3 1 : 60 30
buffer_head 490132 492440 96 12285 12311 1 : 252 126
mm_struct 120 120 160 5 5 1 : 252 126
vm_area_struct 1711 1711 64 29 29 1 : 252 126
fs_cache 177 177 64 3 3 1 : 252 126
files_cache 99 99 416 11 11 1 : 124 62
signal_act 57 57 1312 19 19 1 : 60 30
size-131072(DMA) 0 0 131072 0 0 32 : 0 0
size-131072 0 0 131072 0 0 32 : 0 0
size-65536(DMA) 0 0 65536 0 0 16 : 0 0
size-65536 16 16 65536 16 16 16 : 0 0
size-32768(DMA) 0 0 32768 0 0 8 : 0 0
size-32768 0 0 32768 0 0 8 : 0 0
size-16384(DMA) 0 0 16384 0 0 4 : 0 0
size-16384 8 9 16384 8 9 4 : 0 0
size-8192(DMA) 0 0 8192 0 0 2 : 0 0
size-8192 4 4 8192 4 4 2 : 0 0
size-4096(DMA) 0 0 4096 0 0 1 : 60 30
size-4096 51 51 4096 51 51 1 : 60 30
size-2048(DMA) 0 0 2048 0 0 1 : 60 30
size-2048 108 108 2048 54 54 1 : 60 30
size-1024(DMA) 0 0 1024 0 0 1 : 124 62
size-1024 173 200 1024 50 50 1 : 124 62
size-512(DMA) 0 0 512 0 0 1 : 124 62
size-512 304 304 512 38 38 1 : 124 62
size-256(DMA) 0 0 256 0 0 1 : 252 126
size-256 195 195 256 13 13 1 : 252 126
size-128(DMA) 2 30 128 1 1 1 : 252 126
size-128 900 900 128 30 30 1 : 252 126
size-64(DMA) 0 0 64 0 0 1 : 252 126
size-64 531 531 64 9 9 1 : 252 126
size-32(DMA) 34 113 32 1 1 1 : 252 126
size-32 2456 3955 32 35 35 1 : 252 126
[-- Attachment #3: klogd --]
[-- Type: text/plain, Size: 20446 bytes --]
klogd 1.3-3, log source = /proc/kmsg started.
Inspecting /boot/System.map
Loaded 22179 symbols from /boot/System.map.
Symbols match kernel version 2.4.10.
Loaded 14 symbols from 2 modules.
phys ID: 1) waiting for CALLOUT
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+Sending STARTUP #2.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 1.
<4>After Callout 1.
<4>CALLIN, before setup_local_APIC().
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 1595.80 BogoMIPS
<4>Stack at about c3219fbc
<7>CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
<5>CPU serial number disabled.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>OK.
<4>CPU1: Intel Pentium III (Coppermine) stepping 06
<4>CPU has booted.
<4>Before bogomips.
<6>Total of 2 processors activated (3188.32 BogoMIPS).
<4>Before bogocount - setting activated=1.
<4>Boot done.
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<4>Synchronizing Arb IDs.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-3, 2-7, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=31 pin1=2 pin2=0
<6>activating NMI Watchdog ... done.
<4>CPU#0 NMI appears to be stuck.
<7>number of MP IRQ sources: 23.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178011
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0011
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 003 03 0 0 0 0 0 1 1 31
<7> 03 000 00 1 0 0 0 0 0 0 00
<7> 04 003 03 0 0 0 0 0 1 1 41
<7> 05 003 03 0 0 0 0 0 1 1 49
<7> 06 003 03 0 0 0 0 0 1 1 51
<7> 07 000 00 1 0 0 0 0 0 0 00
<7> 08 003 03 0 0 0 0 0 1 1 59
<7> 09 003 03 0 0 0 0 0 1 1 61
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 003 03 0 0 0 0 0 1 1 69
<7> 0d 003 03 0 0 0 0 0 1 1 71
<7> 0e 003 03 0 0 0 0 0 1 1 79
<7> 0f 003 03 0 0 0 0 0 1 1 81
<7> 10 003 03 1 1 0 1 0 1 1 89
<7> 11 003 03 1 1 0 1 0 1 1 91
<7> 12 003 03 1 1 0 1 0 1 1 99
<7> 13 003 03 1 1 0 1 0 1 1 A1
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ4 -> 4
<7>IRQ5 -> 5
<7>IRQ6 -> 6
<7>IRQ8 -> 8
<7>IRQ9 -> 9
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<7>IRQ16 -> 16
<7>IRQ17 -> 17
<7>IRQ18 -> 18
<7>IRQ19 -> 19
<6>.................................... done.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 798.6890 MHz.
<4>..... host bus clock speed is 133.1147 MHz.
<4>cpu: 0, clocks: 1331147, slice: 443715
<4>CPU0<T0:1331136,T1:887408,D:13,S:443715,C:1331147>
<4>cpu: 1, clocks: 1331147, slice: 443715
<4>CPU1<T0:1331136,T1:443696,D:10,S:443715,C:1331147>
<4>checking TSC synchronization across CPUs: passed.
<4>Setting commenced=1, go go go
<4>mtrr: your CPUs had inconsistent fixed MTRR settings
<4>mtrr: your CPUs had inconsistent variable MTRR settings
<4>mtrr: probably your BIOS does not setup all CPUs
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=3
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<4>querying PCI -> IRQ mapping bus:0, slot:7, pin:3.
<6>PCI->APIC IRQ transform: (B0,I7,P3) -> 19
<4>querying PCI -> IRQ mapping bus:0, slot:7, pin:3.
<6>PCI->APIC IRQ transform: (B0,I7,P3) -> 19
<4>querying PCI -> IRQ mapping bus:0, slot:9, pin:0.
<6>PCI->APIC IRQ transform: (B0,I9,P0) -> 16
<4>querying PCI -> IRQ mapping bus:0, slot:11, pin:0.
<6>PCI->APIC IRQ transform: (B0,I11,P0) -> 17
<4>querying PCI -> IRQ mapping bus:0, slot:13, pin:0.
<6>PCI->APIC IRQ transform: (B0,I13,P0) -> 18
<4>querying PCI -> IRQ mapping bus:0, slot:14, pin:0.
<6>PCI->APIC IRQ transform: (B0,I14,P0) -> 18
<4>querying PCI -> IRQ mapping bus:1, slot:0, pin:0.
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<4>querying PCI -> IRQ mapping bus:2, slot:4, pin:0.
<6>PCI->APIC IRQ transform: (B2,I4,P0) -> 17
<4>querying PCI -> IRQ mapping bus:2, slot:5, pin:0.
<6>PCI->APIC IRQ transform: (B2,I5,P0) -> 19
<4>querying PCI -> IRQ mapping bus:3, slot:0, pin:0.
<6>PCI->APIC IRQ transform: (B3,I0,P0) -> 19
<6>PCI: Enabling Via external APIC routing
<6>PCI: Via IRQ fixup for 00:07.2, from 10 to 3
<6>PCI: Via IRQ fixup for 00:07.3, from 10 to 3
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd v1.8
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<6>Coda Kernel/Venus communications, v5.3.14, coda@cs.cmu.edu
<5>udf: registering filesystem
<4>JFS development version: $Name: v1_0_4 $
<6>SGI XFS with ACLs, EAs, DMAPI, realtime, quota, no debug enabled
<4>i2c-core.o: i2c core module
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
<6>Real Time Clock Driver v1.10e
<6>Non-volatile memory driver v1.1
<4>block: 128 slots per queue, batch=16
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
<4> ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:DMA, hdd:pio
<4>HPT370: IDE controller on PCI bus 00 dev 70
<4>HPT370: chipset revision 3
<4>HPT370: not 100% native mode: will probe irqs later
<4> ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:DMA
<4> ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
<4>hda: Maxtor 51536U3, ATA DISK drive
<4>hdc: CREATIVEDVD5240E-1, ATAPI CD/DVD-ROM drive
<4>hde: WDC WD400AB-00BVA0, ATA DISK drive
<4>hdf: WDC WD400AB-00BVA0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide2 at 0xd800-0xd807,0xdc02 on irq 18
<6>hda: 30015216 sectors (15368 MB) w/2048KiB Cache, CHS=29777/16/63, UDMA(66)
<6>hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
<6>hdf: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
<6>Partition check:
<6> hda: hda1 hda2 hda3
<6> hde: [PTBL] [4865/255/63] hde1
<6> hdf: unknown partition table
<6>Floppy drive(s): fd0 is 2.88M AMI BIOS
<6>FDC 0 is a post-1991 82077
<7>cpqarray: Device 0xe11 has been found at bus 3 dev 0 func 0
<4>Compaq SMART2 Driver (v 2.4.5)
<4>Found 1 controller(s)
<6>cpqarray: Finding drives on ida0 (Smart Array 3200)
<6>cpqarray ida/c0d0: blksz=512 nr_blks=44055840
<6> ida/c0d0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 >
<6>NET4: Frame Diverter 0.46
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<4>CSLIP: code copyright 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
<6>loop: loaded (max 8 devices)
<4>eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
<4>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
<7>divert: allocating divert_blk for eth0
<6>eth0: OEM i82557/i82558 10/100 Ethernet, 00:50:8B:95:58:FA, IRQ 17.
<6> Receiver lock-up bug exists -- enabling work-around.
<6> Board assembly 009542-003, Physical connectors present: RJ45
<6> Primary interface chip i82555 PHY #1.
<6> General self-test: passed.
<6> Serial sub-system self-test: passed.
<6> Internal registers self-test: passed.
<6> ROM checksum self-test: passed (0x24c9f043).
<6> Receiver lock-up workaround activated.
<7>divert: allocating divert_blk for eth1
<6>eth1: OEM i82557/i82558 10/100 Ethernet, 00:50:8B:95:58:FB, IRQ 19.
<6> Receiver lock-up bug exists -- enabling work-around.
<6> Board assembly 009542-003, Physical connectors present: RJ45
<6> Primary interface chip i82555 PHY #1.
<6> General self-test: passed.
<6> Serial sub-system self-test: passed.
<6> Internal registers self-test: passed.
<6> ROM checksum self-test: passed (0x24c9f043).
<6> Receiver lock-up workaround activated.
<6>PPP generic driver version 2.4.1
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<7>divert: not allocating divert_blk for non-ethernet device dummy0
<7>divert: not allocating divert_blk for non-ethernet device bond0
<7>divert: not allocating divert_blk for non-ethernet device eql
<4>Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon@ncm.com)
<6>Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky
<6>Linux video capture interface: v1.00
<6>Linux agpgart interface v0.99 (c) Jeff Hartmann
<6>agpgart: Maximum main memory to use for agp memory: 816M
<6>agpgart: Detected Via Apollo Pro chipset
<6>agpgart: AGP aperture is 16M @ 0xda000000
<6>SCSI subsystem driver Revision: 1.00
<5>megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
<5>megaraid: found 0x101e:0x9010:idx 0:bus 0:slot 13:func 0
<5>scsi0 : Found a MegaRAID controller at 0xd410, IRQ: 18
<5>megaraid: [\x03\x04A :\x03\x04A ] detected 2 logical drives
<5>megaraid: channel[1] is raid.
<5>megaraid: channel[2] is raid.
<5>megaraid: channel[3] is raid.
<4>megaraid: no BIOS enabled.
<6>scsi0 : AMI MegaRAID \x03\x04A 254 commands 16 targs 3 chans 8 luns
<5>scsi0: scanning channel 1 for devices.
<5>scsi0: scanning channel 2 for devices.
<5>scsi0: scanning channel 3 for devices.
<5>scsi0: scanning virtual channel for logical drives.
<4> Vendor: MegaRAID Model: LD0 RAID5 17354R Rev: A
<4> Type: Direct-Access ANSI SCSI revision: 02
<4> Vendor: MegaRAID Model: LD1 RAID5 8128R Rev: A
<4> Type: Direct-Access ANSI SCSI revision: 02
<6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: CREATIVE Model: DVD5240E-1 Rev: 1.20
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi disk sda at scsi0, channel 3, id 0, lun 0
<4>Attached scsi disk sdb at scsi0, channel 3, id 0, lun 1
<4>SCSI device sda: 35540992 512-byte hdwr sectors (18197 MB)
<6> sda: sda1
<4>SCSI device sdb: 16646144 512-byte hdwr sectors (8523 MB)
<6> sdb: sdb1
<4>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.12
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.268 $ time 19:17:49 Sep 13 2001
<6>usb-uhci.c: High bandwidth mode enabled
<6>usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 19
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: USB UHCI at I/O 0xc000, IRQ 19
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 2
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.268:USB Universal Host Controller Interface driver
<6>Initializing USB Mass Storage driver...
<6>usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>mice: PS/2 mouse device common for all mice
<5>IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 16384 buckets, 128Kbytes
<4>TCP: Hash tables configured (established 262144 bind 65536)
<6>IPv4 over IPv4 tunneling driver
<7>divert: not allocating divert_blk for non-ethernet device tunl0
<6>GRE over IPv4 tunneling driver
<7>divert: not allocating divert_blk for non-ethernet device gre0
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>IPv6 v0.8 for NET4.0
<6>IPv6 over IPv4 tunneling driver
<7>divert: not allocating divert_blk for non-ethernet device sit0
<6>NET4: Ethernet Bridge 008 for NET4.0
<4>XFS mounting filesystem ida0(72,5)
<4>XFS: WARNING: recovery required on readonly filesystem.
<4>XFS: write access will be enabled during mount.
<4>Starting XFS recovery on filesystem: ida0(72,5) (dev: 72/5)
<4>Ending XFS recovery on filesystem: ida0(72,5) (dev: 72/5)
<4>VFS: Mounted root (xfs filesystem) readonly.
<4>Freeing unused kernel memory: 236k freed
<6>Adding Swap: 975096k swap-space (priority -1)
<4>XFS mounting filesystem ida0(72,8)
<4>Starting XFS recovery on filesystem: ida0(72,8) (dev: 72/8)
<4>Ending XFS recovery on filesystem: ida0(72,8) (dev: 72/8)
<4>XFS mounting filesystem ida0(72,6)
<4>Starting XFS recovery on filesystem: ida0(72,6) (dev: 72/6)
<4>Ending XFS recovery on filesystem: ida0(72,6) (dev: 72/6)
<4>XFS mounting filesystem ida0(72,7)
<4>Starting XFS recovery on filesystem: ida0(72,7) (dev: 72/7)
<4>Ending XFS recovery on filesystem: ida0(72,7) (dev: 72/7)
<4>XFS mounting filesystem ida0(72,9)
<4>Starting XFS recovery on filesystem: ida0(72,9) (dev: 72/9)
<4>Ending XFS recovery on filesystem: ida0(72,9) (dev: 72/9)
<4>XFS mounting filesystem ida0(72,11)
<4>Starting XFS recovery on filesystem: ida0(72,11) (dev: 72/11)
<4>Ending XFS recovery on filesystem: ida0(72,11) (dev: 72/11)
<4>reiserfs: checking transaction log (device 08:11) ...
<4>Using tea hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>jfs_mount: Mount Failure: File System Dirty.
<4>Mount JFS Failure: 22
<4>jfs_mount failed w/return code = 22
<6> ataraida: ataraida1
<6>Highpoint HPT370 Softwareraid driver for linux version 0.01
<6>Drive 0 is 38166 Mb
<6>Drive 1 is 38166 Mb
<6>Raid array consists of 2 drives.
<7>VFS: Disk change detected on device ide1(22,0)
<3>ide-scsi: hdc: unsupported command in request queue (0)
<4>end_request: I/O error, dev 16:00 (hdc), sector 64
<4>isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
<7>eth0: no IPv6 routers present
<7>bond0: no IPv6 routers present
<7>eth1: no IPv6 routers present
<7>Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
<7>SMSC Super-IO detection, now testing Ports 2F0, 370 ...
<6>parport_pc: Via 686A parallel port disabled in BIOS
<6>lp: driver loaded but no devices found
<6>[drm] Initialized tdfx 1.0.0 20010216 on minor 0
<6>[drm] Initialized tdfx 1.0.0 20010216 on minor 1
<6>es1371: version v0.30 time 14:39:43 Sep 13 2001
<6>es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06
<6>es1371: found es1371 rev 6 at io 0xcc00 irq 17
<6>es1371: features: joystick 0x0
<6>ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A)
<4>XFS mounting filesystem ataraid(114,1)
<4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<3>__alloc_pages: 0-order allocation failed (gfp=0x70/1).
<4>invalid operand: 0000
<4>CPU: 0
<4>EIP: 0010:[__alloc_pages+602/616]
<4>EFLAGS: 00010282
<4>eax: 0000003a ebx: 00000000 ecx: 00000002 edx: 00000002
<4>esi: c0433628 edi: 00000000 ebp: f7bfa000 esp: f7bfbdc8
<4>ds: 0018 es: 0018 ss: 0018
<4>Process kswapd (pid: 5, stackpage=f7bfb000)
<4>Stack: 00000070 f6feeb40 00001089 c04d7c80 00000000 00000010 00000001 c043361c
<4> 00000070 c012eb20 c0647240 c0133425 c0647240 c013356c f6feeb40 f6feeb40
<4> 00000001 c04d7c80 f5ce2e00 c04d7c80 c04d7c80 f7b6a260 c04d7ca8 00000002
<4>Call Trace: [_alloc_pages+24/28] [alloc_bounce_page+13/144] [create_bounce+48/524] [__make_request+342/1848] [__make_request+1027/1848]
<4> [__make_request+155/1848] [start_io+126/232] [generic_make_request+160/292] [submit_bh+66/96] [convert_page+140/180] [cluster_write+186/208]
<4> [pagebuf_delalloc_convert+196/208] [pagebuf_write_full_page+118/604] [linvfs_pb_bmap+0/188] [linvfs_write_full_page+15/32] [linvfs_pb_bmap+0/188] [page_launder+683/1504]
<4> [do_try_to_free_pages+83/196] [kswapd+105/172] [rest_init+0/68] [kernel_thread+35/48]
<4>
<4>Code: 0f 0b 31 c0 5b 5e 5f 5d 83 c4 14 c3 89 f6 83 fa 09 77 09 e8
<3>__alloc_pages: 0-order allocation failed (gfp=0x70/1).
<4>invalid operand: 0000
<4>CPU: 0
<4>EIP: 0010:[__alloc_pages+602/616]
<4>EFLAGS: 00010282
<4>eax: 0000003a ebx: 00000000 ecx: 00000002 edx: 00000002
<4>esi: c0433628 edi: 00000000 ebp: f6df8000 esp: f6df9b2c
<4>ds: 0018 es: 0018 ss: 0018
<4>Process cp (pid: 4304, stackpage=f6df9000)
<4>Stack: 00000070 f6d6d3c0 00001089 c04d7c80 00000000 00000010 00000001 c043361c
<4> 00000070 c012eb20 c06270c0 c0133425 c06270c0 c013356c f6d6d3c0 f6d6d3c0
<4> 00000001 c04d7c80 c04d7cb0 f6fe6980 c04d7c80 4807b8d8 c04d7ca8 00000002
<4>Call Trace: [_alloc_pages+24/28] [alloc_bounce_page+13/144] [create_bounce+48/524] [__make_request+342/1848] [__make_request+402/1848]
<4> [__make_request+433/1848] [__make_request+155/1848] [generic_make_request+160/292] [submit_bh+66/96] [convert_page+140/180] [cluster_write+186/208]
<4> [pagebuf_delalloc_convert+196/208] [pagebuf_write_full_page+118/604] [linvfs_pb_bmap+0/188] [linvfs_write_full_page+15/32] [linvfs_pb_bmap+0/188] [page_launder+683/1504]
<4> [do_try_to_free_pages+83/196] [try_to_free_pages+34/44] [__alloc_pages+463/616] [_alloc_pages+24/28] [grab_cache_page+100/164] [__pagebuf_do_delwri+95/680]
<4> [linvfs_pb_bmap+170/188] [_pagebuf_file_write+367/552] [pagebuf_generic_file_write+279/1104] [linvfs_pb_bmap+0/188] [update_atime+68/72] [xfs_write+980/1768]
<4> [linvfs_pb_bmap+0/188] [linvfs_write+272/332] [sys_write+142/196] [system_call+51/56]
<4>
<4>Code: 0f 0b 31 c0 5b 5e 5f 5d 83 c4 14 c3 89 f6 83 fa 09 77 09 e8
<3>__alloc_pages: 0-order allocation failed (gfp=0x70/1).
<4>invalid operand: 0000
<4>CPU: 1
<4>EIP: 0010:[__alloc_pages+602/616]
<4>EFLAGS: 00010286
<4>eax: 0000003a ebx: 00000000 ecx: 00000046 edx: 00000001
<4>esi: c0433628 edi: 00000000 ebp: f105a000 esp: f105bc00
<4>ds: 0018 es: 0018 ss: 0018
<4>Process analog (pid: 4679, stackpage=f105b000)
<4>Stack: 00000070 c35a6b40 00001089 c04d7c80 00000000 00000010 00000001 c043361c
<4> 00000070 c012eb20 f503c900 c0133425 f503c900 c013356c c35a6b40 c35a6b40
<4> 00000001 c04d7c80 c04d7cb0 c0f22660 c04d7c80 4807a000 c04d7ca8 00000002
<4>Call Trace: [_alloc_pages+24/28] [alloc_bounce_page+13/144] [create_bounce+48/524] [__make_request+342/1848] [__make_request+402/1848]
<4> [__make_request+433/1848] [__make_request+155/1848] [generic_make_request+160/292] [submit_bh+66/96] [convert_page+140/180] [cluster_write+186/208]
<4> [pagebuf_delalloc_convert+196/208] [pagebuf_write_full_page+118/604] [linvfs_pb_bmap+0/188] [linvfs_write_full_page+15/32] [linvfs_pb_bmap+0/188] [page_launder+683/1504]
<4> [do_try_to_free_pages+83/196] [try_to_free_pages+34/44] [__alloc_pages+463/616] [_alloc_pages+24/28] [generic_file_readahead+470/632] [do_generic_file_read+520/1284]
<4> [generic_file_read+99/128] [file_read_actor+0/224] [xfs_read+654/728] [linvfs_read+163/208] [sys_read+142/196] [system_call+51/56]
<4>
<4>Code: 0f 0b 31 c0 5b 5e 5f 5d 83 c4 14 c3 89 f6 83 fa 09 77 09 e8
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 0-order allocation failed in 2.4.10-pre8
2001-09-14 18:38 0-order allocation failed in 2.4.10-pre8 J
@ 2001-09-14 18:48 ` kelley eicher
2001-09-14 19:09 ` Jens Axboe
0 siblings, 1 reply; 7+ messages in thread
From: kelley eicher @ 2001-09-14 18:48 UTC (permalink / raw)
To: J; +Cc: linux-kernel
On Fri, 14 Sep 2001, J wrote:
> Hello,
> I am reporting the same problem that kelley eicher
> has, "0-order allocation failed (gfp=0x70/1)", hopefully
> my info is helpfull. I added BUG() after the printk's in
> "mm/page_alloc.c:505". I am able to get this message
> when ever I copy a large (2+ gig) file from one XFS filesystem
> to another on the same disk controller. I have attached klogd -p output
> and an output of /proc/slabinfo from <= 1 second before the
> Oops. If anyone would like more info, or for me to apply dangerous
> patches, or to shut up even, let me know.
>
> Jack
>
> Machine:
> Kernel Version 2.4.10-pre8 with SGI-XFS patches and IBM-JFS patches.
> compiled with egcs 2.91-66 ;) (Some more info @ http://whatevr.i2net.com)
> SMP P3 Box with 2 Gig of memory
after spending a few dayz trying to figure out where this is happening, i
noticed that the alloc_pages() errors only occur after used memory goes
above 899MB. this is the limit of physical memory unless you enable the
himem option. the machines i had been seeing this on all had 1G+ memory
and i had enabled the 4G himem option on each of them. so turn that option
off and you will no longer see alloc_pages errors. you'll have to suffer
through only having 900MB of memory to play with though. ;>
-kelley
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 0-order allocation failed in 2.4.10-pre8
2001-09-14 18:48 ` kelley eicher
@ 2001-09-14 19:09 ` Jens Axboe
2001-09-16 2:06 ` Daniel Phillips
0 siblings, 1 reply; 7+ messages in thread
From: Jens Axboe @ 2001-09-14 19:09 UTC (permalink / raw)
To: kelley eicher; +Cc: J, linux-kernel
On Fri, Sep 14 2001, kelley eicher wrote:
> On Fri, 14 Sep 2001, J wrote:
>
> > Hello,
> > I am reporting the same problem that kelley eicher
> > has, "0-order allocation failed (gfp=0x70/1)", hopefully
> > my info is helpfull. I added BUG() after the printk's in
> > "mm/page_alloc.c:505". I am able to get this message
> > when ever I copy a large (2+ gig) file from one XFS filesystem
> > to another on the same disk controller. I have attached klogd -p output
> > and an output of /proc/slabinfo from <= 1 second before the
> > Oops. If anyone would like more info, or for me to apply dangerous
> > patches, or to shut up even, let me know.
> >
> > Jack
> >
> > Machine:
> > Kernel Version 2.4.10-pre8 with SGI-XFS patches and IBM-JFS patches.
> > compiled with egcs 2.91-66 ;) (Some more info @ http://whatevr.i2net.com)
> > SMP P3 Box with 2 Gig of memory
>
> after spending a few dayz trying to figure out where this is happening, i
> noticed that the alloc_pages() errors only occur after used memory goes
> above 899MB. this is the limit of physical memory unless you enable the
> himem option. the machines i had been seeing this on all had 1G+ memory
> and i had enabled the 4G himem option on each of them. so turn that option
> off and you will no longer see alloc_pages errors. you'll have to suffer
> through only having 900MB of memory to play with though. ;>
Use the
*.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.9/block-highmem-all
patch and you can use highmem without having to worry about failed
0-order bounce pages allocations.
--
Jens Axboe
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 0-order allocation failed in 2.4.10-pre8
2001-09-14 19:09 ` Jens Axboe
@ 2001-09-16 2:06 ` Daniel Phillips
2001-09-16 8:03 ` Jens Axboe
0 siblings, 1 reply; 7+ messages in thread
From: Daniel Phillips @ 2001-09-16 2:06 UTC (permalink / raw)
To: Jens Axboe, kelley eicher; +Cc: J, linux-kernel
> Use the
>
> *.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.9/block-highmem-all
>
> patch and you can use highmem without having to worry about failed
> 0-order bounce pages allocations.
Right, by using 64 bit DMA instead of bounce buffers. But aren't there cases
where the 64 bit capable hardware isn't there but somebody still wants to use
highmem?
--
Daniel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 0-order allocation failed in 2.4.10-pre8
2001-09-16 2:06 ` Daniel Phillips
@ 2001-09-16 8:03 ` Jens Axboe
2001-09-16 9:21 ` Daniel Phillips
0 siblings, 1 reply; 7+ messages in thread
From: Jens Axboe @ 2001-09-16 8:03 UTC (permalink / raw)
To: Daniel Phillips; +Cc: kelley eicher, J, linux-kernel
On Sun, Sep 16 2001, Daniel Phillips wrote:
> > Use the
> >
> > *.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.9/block-highmem-all
> >
> > patch and you can use highmem without having to worry about failed
> > 0-order bounce pages allocations.
>
> Right, by using 64 bit DMA instead of bounce buffers. But aren't there cases
> where the 64 bit capable hardware isn't there but somebody still wants to use
> highmem?
Yes of course. The common case is not 64-bit dma here though, it's just
being able to DMA to highmem pages (just full 32-bit dma instead of low
memory dma). And that should cover most systems out there.
--
Jens Axboe
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 0-order allocation failed in 2.4.10-pre8
2001-09-16 8:03 ` Jens Axboe
@ 2001-09-16 9:21 ` Daniel Phillips
2001-09-16 9:24 ` Jens Axboe
0 siblings, 1 reply; 7+ messages in thread
From: Daniel Phillips @ 2001-09-16 9:21 UTC (permalink / raw)
To: Jens Axboe; +Cc: kelley eicher, J, linux-kernel
On September 16, 2001 10:03 am, Jens Axboe wrote:
> On Sun, Sep 16 2001, Daniel Phillips wrote:
> > > Use the
> > >
> > >
*.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.9/block-highmem-all
> > >
> > > patch and you can use highmem without having to worry about failed
> > > 0-order bounce pages allocations.
> >
> > Right, by using 64 bit DMA instead of bounce buffers. But aren't there
cases
> > where the 64 bit capable hardware isn't there but somebody still wants to
use
> > highmem?
>
> Yes of course. The common case is not 64-bit dma here though, it's just
> being able to DMA to highmem pages (just full 32-bit dma instead of low
> memory dma). And that should cover most systems out there.
Right, but that does not mean we can forget about bounce buffers, does it.
Most users will probably be able to use full 32-bit dma and users with more
than 4 GB of memory really should go to the effort of making sure their
hardware supports 64 bit dma. But there will still be a few people who have
to use bounce buffers.
I'm just confirming that we really do have to push on and get bounce buffers
working reliably, even if most people will be able to use your far nicer
alternative.
--
Daniel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 0-order allocation failed in 2.4.10-pre8
2001-09-16 9:21 ` Daniel Phillips
@ 2001-09-16 9:24 ` Jens Axboe
0 siblings, 0 replies; 7+ messages in thread
From: Jens Axboe @ 2001-09-16 9:24 UTC (permalink / raw)
To: Daniel Phillips; +Cc: kelley eicher, J, linux-kernel
On Sun, Sep 16 2001, Daniel Phillips wrote:
> On September 16, 2001 10:03 am, Jens Axboe wrote:
> > On Sun, Sep 16 2001, Daniel Phillips wrote:
> > > > Use the
> > > >
> > > >
> *.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.9/block-highmem-all
> > > >
> > > > patch and you can use highmem without having to worry about failed
> > > > 0-order bounce pages allocations.
> > >
> > > Right, by using 64 bit DMA instead of bounce buffers. But aren't there
> cases
> > > where the 64 bit capable hardware isn't there but somebody still wants to
> use
> > > highmem?
> >
> > Yes of course. The common case is not 64-bit dma here though, it's just
> > being able to DMA to highmem pages (just full 32-bit dma instead of low
> > memory dma). And that should cover most systems out there.
>
> Right, but that does not mean we can forget about bounce buffers, does it.
> Most users will probably be able to use full 32-bit dma and users with more
> than 4 GB of memory really should go to the effort of making sure their
> hardware supports 64 bit dma. But there will still be a few people who have
> to use bounce buffers.
Of course. My point was merely what with the block-highmem patch, most
users will never need bounce -> it would therefore solve the posters
issue.
> I'm just confirming that we really do have to push on and get bounce buffers
> working reliably, even if most people will be able to use your far nicer
> alternative.
Agreed. It will be much less important, but there will still be a need
for it.
--
Jens Axboe
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2001-09-16 9:24 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-09-14 18:38 0-order allocation failed in 2.4.10-pre8 J
2001-09-14 18:48 ` kelley eicher
2001-09-14 19:09 ` Jens Axboe
2001-09-16 2:06 ` Daniel Phillips
2001-09-16 8:03 ` Jens Axboe
2001-09-16 9:21 ` Daniel Phillips
2001-09-16 9:24 ` Jens Axboe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox