From: Christian Ullrich <chris@chrullrich.de>
To: Alexander Viro <viro@math.psu.edu>
Cc: linux-kernel@vger.kernel.org, reiserfs-list@namesys.com
Subject: Re: [reiserfs-list] Can't mount reiserfs with 2.4.11, 2.4.10 works fine
Date: Fri, 12 Oct 2001 00:31:36 +0200 [thread overview]
Message-ID: <20011012003136.A435@christian.chrullrich.de> (raw)
In-Reply-To: <20011011223231.A730@christian.chrullrich.de> <Pine.GSO.4.21.0110111656200.24742-100000@weyl.math.psu.edu>
In-Reply-To: <Pine.GSO.4.21.0110111656200.24742-100000@weyl.math.psu.edu>; from viro@math.psu.edu on Thu, Oct 11, 2001 at 05:07:04PM -0400
[-- Attachment #1: Type: text/plain, Size: 2905 bytes --]
* Alexander Viro wrote on Thursday, 2001-10-11:
> Umhm... Could you dd the sectors 0, 10000368 and 48063456 and mail them?
Here you are. I did the following (in 2.4.10, tell me if
you need them from another kernel):
# dd if=/dev/hdb of=hdb-sect0 bs=512 count=1
# dd if=/dev/hdb of=hdb-sect10000368 bs=512 count=1 skip=10000368
# dd if=/dev/hdb of=hdb-sect48063456 bs=512 count=1 skip=48063456
> Another thing to do - take the patch I've sent and add
>
> printk("[%d %d]\n", start, size);
>
> in the beginning of fs/partitions/check.c::add_gd_partition()
I patched both into 2.4.12, the patch went in without any problems.
The kernel (both vanilla and patched) didn't build with the .config I
used with the other kernels, it failed somewhere called IEEE1284.
dmesg output for 2.4.10+line:
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
Partition check:
sda:[63 16002]
sda1[16065 401625]
sda2[417690 8401995]
sda3[8819685 9092790]
sda4 <[8819748 5253192]
sda5[14073003 273042]
sda6[14346108 995967]
sda7[15342138 2570337]
sda8 >
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
sdb:[63 10490382]
sdb1[10490445 7164990]
sdb2[17655435 257040]
sdb4
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(100)
hdb: 80063424 sectors (40992 MB) w/2048KiB Cache, CHS=79428/16/63, UDMA(100)
hda:[63 2104452]
hda1[2104515 37768815]
hda2 <[2104578 20980827]
hda5[23085468 48132]
hda6[23133663 16739667]
hda7 >
hdb:[63 10000305]
hdb1[10000368 68063184]
hdb2 <[10000431 20972889]
hdb5[48063519 30000033]
hdb6 >[78063552 1999872]
hdb3
------------------------------------------------------------------
dmesg output for 2.4.12+patch+line:
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
Partition check:
sda:[63 16002]
sda1[16065 401625]
sda2[417690 8401995]
sda3[8819685 9092790]
sda4 <[8819748 5253192]
sda5[14073003 273042]
sda6[14346108 995967]
sda7[15342138 2570337]
sda8 >
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
sdb:[63 10490382]
sdb1[10490445 7164990]
sdb2[17655435 257040]
sdb4
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(100)
hdb: 80063424 sectors (40992 MB) w/2048KiB Cache, CHS=79428/16/63, UDMA(100)
hda:[63 2104452]
hda1[2104515 37768815]
hda2 <[2104578 20980827]
hda5[23085468 48132]
hda6[23133663 16739667]
hda7 >
hdb:[63 10000305]
hdb1[10000368 68063184]
hdb2 < >[78063552 1999872]
hdb3
[...]
ReiserFS version 3.6.25
hdb6: bad access: block=128, count=2
end_request: I/O error, dev 03:46 (hdb), sector 128
read_super_block: bread failed (dev 03:46, block 64, size 1024)
hdb6: bad access: block=16, count=2
end_request: I/O error, dev 03:46 (hdb), sector 16
---------------------------------------------------------------
--
Christian Ullrich Registrierter Linux-User #125183
"Sie können nach R'ed'mond fliegen -- aber Sie werden sterben"
[-- Attachment #2: hdb-sect0 --]
[-- Type: application/octet-stream, Size: 512 bytes --]
[-- Attachment #3: hdb-sect10000368 --]
[-- Type: application/octet-stream, Size: 512 bytes --]
[-- Attachment #4: hdb-sect48063456 --]
[-- Type: application/octet-stream, Size: 512 bytes --]
next prev parent reply other threads:[~2001-10-11 22:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-11 4:12 Can't mount reiserfs with 2.4.11, 2.4.10 works fine Christian Ullrich
2001-10-11 8:08 ` [reiserfs-list] " Vladimir V. Saveliev
2001-10-11 18:03 ` Christian Ullrich
2001-10-11 18:16 ` Alexander Viro
2001-10-11 20:32 ` Christian Ullrich
2001-10-11 21:07 ` Alexander Viro
2001-10-11 22:31 ` Christian Ullrich [this message]
2001-10-11 20:43 ` Christian Ullrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011012003136.A435@christian.chrullrich.de \
--to=chris@chrullrich.de \
--cc=linux-kernel@vger.kernel.org \
--cc=reiserfs-list@namesys.com \
--cc=viro@math.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox