From: "J . A . Magallon" <jamagallon@able.es>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Lista Linux-Kernel <linux-kernel@vger.kernel.org>
Subject: Re: Status of ServerWorks UDMA
Date: Tue, 16 Oct 2001 16:13:23 +0200 [thread overview]
Message-ID: <20011016161323.A7710@werewolf.able.es> (raw)
In-Reply-To: <20011016003812.A28638@werewolf.able.es> <E15tGWg-0003fP-00@the-village.bc.nu>
In-Reply-To: <E15tGWg-0003fP-00@the-village.bc.nu>; from alan@lxorguk.ukuu.org.uk on Tue, Oct 16, 2001 at 00:48:02 +0200
On 20011016 Alan Cox wrote:
>
>Please send me details on the system. lspci -v output too.
>
Here is the info. I CC the list because of the high number of 'unknown devices',
parhaps it is worth a bunch of PCI ids update (kernel is a 2.4.10, still have to
build a .12, perhaps they are updated there...).
I was not completely correct, this mobo is a SuperMicro P3TD6 (it is the front
end, the 370DLE is the one for the cluster nodes...). Specs:
- Chipset: ServerWorks HE-SL
- AGP 2x Pro, say the specs...
- On board Intel 82559 Ethernet (not recognised)
- Onboard Adaptec AIC-7899W (7902 future option) dual channel
Ultra160 (320) SCSI controller
- Dual Ultra DMA (UDMA/33) bus master/EIDE channels
- Dual USB (Universal Serial Bus) port
- Ethernet 3Com 905C-TX card
- Ehternet 3Com 980TX (not recognised in .10 bu present in .12-ac3 pci.ids
- Creative GeForce3 (not recognised)
lspci -v
00:00.0 Host bridge: ServerWorks CNB20HE (rev 23)
Flags: fast devsel
Memory at e8000000 (32-bit, prefetchable) [disabled] [size=128M]
Memory at e7fff000 (32-bit, non-prefetchable) [disabled] [size=4K]
00:00.1 PCI bridge: ServerWorks CNB20HE (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc500000-fe5fffff
Prefetchable memory behind bridge: f4100000-fc2fffff
Capabilities: [80] AGP version 2.0
00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
Flags: medium devsel
00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
Flags: medium devsel
00:01.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Flags: bus master, slow devsel, latency 64, IRQ 16
I/O ports at df00 [size=64]
Capabilities: [dc] Power Management version 1
00:03.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Flags: bus master, medium devsel, latency 64, IRQ 20
I/O ports at dc00 [size=128]
Memory at feafb800 (32-bit, non-prefetchable) [size=128]
Expansion ROM at fea60000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00:05.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Unknown device 9d15:0001
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 26
BIST result: 00
I/O ports at d000 [disabled] [size=256]
Memory at feafc000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feaa0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00:05.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Unknown device 9d15:0001
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 27
BIST result: 00
I/O ports at d800 [disabled] [size=256]
Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00:06.0 Ethernet controller: Intel Corporation: Unknown device 2449 (rev 08)
Subsystem: Intel Corporation: Unknown device 100c
Flags: bus master, medium devsel, latency 64, IRQ 31
Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=64]
Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fe800000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
00:0f.0 ISA bridge: ServerWorks OSB4 (rev 50)
Subsystem: ServerWorks OSB4
Flags: bus master, medium devsel, latency 0
00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04) (prog-if 10 [OHCI])
Subsystem: ServerWorks: Unknown device 0220
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0200 (rev a3) (prog-if 00 [VGA])
Subsystem: Micro-star International Co Ltd: Unknown device 8822
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 30
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at fc280000 (32-bit, prefetchable) [size=512K]
Expansion ROM at fe5f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
02:02.0 Ethernet controller: 3Com Corporation: Unknown device 9805 (rev 78)
Subsystem: 3Com Corporation: Unknown device 1000
Flags: bus master, medium devsel, latency 64, IRQ 24
I/O ports at ec00 [size=128]
Memory at febffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
cat /proc/ide/ide0/config
pci bus 00 device 79 vid 1166 did 0211 channel 0
66 11 11 02 05 00 00 02 00 8a 01 01 00 40 80 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a1 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d 20 5d 22 00 00 00 00 08 08 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cat /proc/ide/ide1/config
pci bus 00 device 79 vid 1166 did 0211 channel 1
66 11 11 02 05 00 00 02 00 8a 01 01 00 40 80 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a1 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d 20 5d 22 00 00 00 00 08 08 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--
J.A. Magallon # Let the source be with you...
mailto:jamagallon@able.es
Mandrake Linux release 8.2 (Cooker) for i586
Linux werewolf 2.4.12-ac3-beo #2 SMP Tue Oct 16 01:08:46 CEST 2001 i686
prev parent reply other threads:[~2001-10-16 14:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-15 22:38 Status of ServerWorks UDMA J . A . Magallon
2001-10-15 22:48 ` Alan Cox
2001-10-15 22:49 ` J . A . Magallon
2001-10-16 14:13 ` J . A . Magallon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011016161323.A7710@werewolf.able.es \
--to=jamagallon@able.es \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox