IDE CDROM problems -- No medium found -- 2.4.12-ac3

IDE CDROM problems -- No medium found -- 2.4.12-ac3

[Seth Arnold]

Greetings;

I've been having difficulties mounting CD-ROMs with 2.4.12-ac3 on my x86
uniproc machine (with only Rik's vmpatch applied).

mount will sometimes give:
$ sudo mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
mount: No medium found

Other times, mount will give:
$ mount /mnt/cdrom
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
       or too many mounted file systems
       (aren't you trying to mount an extended partition,
       instead of some logical partition inside?)

Others are much more succinct:
$ mount /mnt/cdrom
mount: No medium found


Other times, in this same uptime, the same CD-ROMs mount just fine, with
the same commands to perform the mounting.

To my knowledge, I am not doing any of that funky ide-scsi stuff. I have
been using grip's cdparanoia to rip CDs; those usually work quite well.


Included here is a list of everything in my .config that had =y or =m.
(The only loaded modules at the moment are: vfat, fat, and usb-uhci.)

I haven't been able to find a pattern of work/failure that makes any
sense. I am hoping someone else here has seen similar problems, or may
have ideas what to do to find the problem. :)

Cheers! :)


CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_MODULES=y
CONFIG_KMOD=y
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_PM=y
CONFIG_APM=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_IVB=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UNIX98_PTYS=y
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_AUTOFS4_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_DEBUG=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFSD=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_VESA=y
CONFIG_FB_VGA16=y
CONFIG_VIDEO_SELECT=y
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_VGA_PLANES=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=y
CONFIG_SOUND_ES1371=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_HID=m
CONFIG_USB_WACOM=m
CONFIG_USB_DC2XX=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_OV511=m
CONFIG_USB_DSBR=m
CONFIG_USB_DABUSB=m
CONFIG_USB_PLUSB=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y

Re: IDE CDROM problems -- No medium found -- 2.4.12-ac3

[Enrico Scholz]

[-- Attachment #1: Type: text/plain, Size: 261 bytes --]

sarnold@wirex.com (Seth Arnold) writes:

> [...]
> mount will sometimes give:
> [...]
> $ mount /mnt/cdrom
> mount: No medium found

ide-cd.c is broken since 2.4.1 and gives bad status reports on most
ATAPI drives. Perhaps the attached patch helps...



Enrico

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: patch-cdrom.diff --]
[-- Type: text/x-patch, Size: 433 bytes --]

--- linux/drivers/ide/ide-cd.c.orig	Tue May 29 11:24:24 2001
+++ linux/drivers/ide/ide-cd.c	Tue May 29 11:25:44 2001
@@ -2319,10 +2319,7 @@
 		 * any other way to detect this...
 		 */
 		if (sense.sense_key == NOT_READY) {
-			if (sense.asc == 0x3a && (!sense.ascq||sense.ascq == 1))
-				return CDS_NO_DISC;
-			else
-				return CDS_TRAY_OPEN;
+			if (sense.asc == 0x3a) return CDS_TRAY_OPEN;
 		}
 
 		return CDS_DRIVE_NOT_READY;

Re: IDE CDROM problems -- No medium found -- 2.4.12-ac3

[Jens Axboe]

[-- Attachment #1: Type: text/plain, Size: 417 bytes --]

On Thu, Oct 18 2001, Enrico Scholz wrote:
> sarnold@wirex.com (Seth Arnold) writes:
> 
> > [...]
> > mount will sometimes give:
> > [...]
> > $ mount /mnt/cdrom
> > mount: No medium found
> 
> ide-cd.c is broken since 2.4.1 and gives bad status reports on most
> ATAPI drives. Perhaps the attached patch helps...

I just sent the right diff to Linus and Alan some days ago, it should
look like this.

-- 
Jens Axboe


[-- Attachment #2: ide-cd-tray-1 --]
[-- Type: text/plain, Size: 405 bytes --]

--- /opt/kernel/linux-2.4.10-pre11/drivers/ide/ide-cd.c	Thu Aug 16 18:30:45 2001
+++ drivers/ide/ide-cd.c	Mon Oct 15 18:54:52 2001
@@ -2409,7 +2409,7 @@
 		 * any other way to detect this...
 		 */
 		if (sense.sense_key == NOT_READY) {
-			if (sense.asc == 0x3a && (!sense.ascq||sense.ascq == 1))
+			if (sense.asc == 0x3a && sense.ascq == 1)
 				return CDS_NO_DISC;
 			else
 				return CDS_TRAY_OPEN;