* SR driver
@ 2001-10-27 8:22 Rogier Wolff
0 siblings, 0 replies; only message in thread
From: Rogier Wolff @ 2001-10-27 8:22 UTC (permalink / raw)
To: Linux kernel mailing list
Hi,
I have a program that will read a device. However, instead of stopping
on error, it will "note the error for later use", and continue.
When I do this on SCSI or IDE disks, the program will get EOF at the
end of the disk, and it can take appropriate action. However, when
run against a SCSI cdrom, it will continue going untill it fills
all my disk space.
This happened on our fileserver, which is currently running 2.4.13,
but it might have been running 2.4.10 at the time that this happened.
(Uptime tells me the machine has been rebooted in the meantime).
Roger.
--
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
* There are old pilots, and there are bold pilots.
* There are also old, bald pilots.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-10-27 8:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-10-27 8:22 SR driver Rogier Wolff
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox