From: Andreas Dilger <adilger@turbolabs.com>
To: torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] compile warning cleanups
Date: Sun, 28 Oct 2001 01:03:06 -0700 [thread overview]
Message-ID: <20011028010306.C4229@lynx.no> (raw)
Linus,
a couple of compile warning cleanups that I've had in my tree for a long
time. Please apply.
Cheers, Andreas
===========================================================================
diff -ru linux.orig/drivers/scsi/aha1542.c linux/drivers/scsi/aha1542.c
--- linux.orig/drivers/scsi/aha1542.c Thu Oct 25 03:04:57 2001
+++ linux/drivers/scsi/aha1542.c Thu Oct 25 02:55:33 2001
@@ -111,7 +111,6 @@
static int setup_busoff[MAXBOARDS];
static int setup_dmaspeed[MAXBOARDS] __initdata = { -1, -1, -1, -1 };
-static char *setup_str[MAXBOARDS] __initdata;
/*
* LILO/Module params: aha1542=<PORTBASE>[,<BUSON>,<BUSOFF>[,<DMASPEED>]]
@@ -960,6 +959,7 @@
#ifndef MODULE
static int setup_idx = 0;
+static char *setup_str[MAXBOARDS] __initdata;
void __init aha1542_setup(char *str, int *ints)
{
diff -ru linux.orig/drivers/sound/cs4232.c linux/drivers/sound/cs4232.c
--- linux.orig/drivers/sound/cs4232.c Thu Oct 25 02:02:31 2001
+++ linux/drivers/sound/cs4232.c Thu Oct 25 02:09:10 2001
@@ -324,7 +324,6 @@
static int __initdata mpuio = -1;
static int __initdata mpuirq = -1;
static int __initdata synthio = -1;
-static int __initdata synthirq = -1;
static int __initdata isapnp = 1;
MODULE_DESCRIPTION("CS4232 based soundcard driver");
@@ -345,8 +344,11 @@
MODULE_PARM_DESC(mpuirq,"MPU 401 IRQ");
MODULE_PARM(synthio,"i");
MODULE_PARM_DESC(synthio,"Maui WaveTable base I/O port");
+#ifdef CONFIG_SOUND_WAVEFRONT_MODULE
+static int __initdata synthirq = -1;
MODULE_PARM(synthirq,"i");
MODULE_PARM_DESC(synthirq,"Maui WaveTable IRQ");
+#endif
MODULE_PARM(isapnp,"i");
MODULE_PARM_DESC(isapnp,"Enable ISAPnP probing (default 1)");
diff -ru linux.orig/net/irda/irda_device.c linux/net/irda/irda_device.c
--- linux.orig/net/irda/irda_device.c Thu Oct 25 01:50:55 2001
+++ linux/net/irda/irda_device.c Wed Oct 24 23:53:49 2001
@@ -78,6 +78,7 @@
"TV_REMOTE",
};
+#ifdef CONFIG_IRDA_DEBUG
static const char *task_state[] = {
"IRDA_TASK_INIT",
"IRDA_TASK_DONE",
@@ -89,6 +90,7 @@
"IRDA_TASK_CHILD_WAIT",
"IRDA_TASK_CHILD_DONE",
};
+#endif
static void irda_task_timer_expired(void *data);
diff -ru linux.orig/net/irda/iriap.c linux/net/irda/iriap.c
--- linux.orig/net/irda/iriap.c Thu Oct 25 01:50:55 2001
+++ linux/net/irda/iriap.c Wed Oct 24 23:53:49 2001
@@ -41,6 +41,7 @@
#include <net/irda/iriap.h>
/* FIXME: This one should go in irlmp.c */
+#ifdef CONFIG_IRDA_DEBUG
static const char *ias_charset_types[] = {
"CS_ASCII",
"CS_ISO_8859_1",
@@ -54,6 +55,7 @@
"CS_ISO_8859_9",
"CS_UNICODE"
};
+#endif
static hashbin_t *iriap = NULL;
static __u32 service_handle;
diff -ru linux.orig/net/irda/irlap.c linux/net/irda/irlap.c
--- linux.orig/net/irda/irlap.c Thu Oct 25 01:50:55 2001
+++ linux/net/irda/irlap.c Wed Oct 24 23:53:49 2001
@@ -53,6 +53,7 @@
extern void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb);
static void __irlap_close(struct irlap_cb *self);
+#ifdef CONFIG_IRDA_DEBUG
static char *lap_reasons[] = {
"ERROR, NOT USED",
"LAP_DISC_INDICATION",
@@ -63,6 +64,7 @@
"LAP_PRIMARY_CONFLICT",
"ERROR, NOT USED",
};
+#endif
#ifdef CONFIG_PROC_FS
int irlap_proc_read(char *, char **, off_t, int);
diff -ru linux.orig/net/irda/irlap_event.c linux/net/irda/irlap_event.c
--- linux.orig/net/irda/irlap_event.c Thu Oct 25 02:03:04 2001
+++ linux/net/irda/irlap_event.c Thu Oct 25 02:09:37 2001
@@ -76,6 +76,7 @@
static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event,
struct sk_buff *, struct irlap_info *);
+#ifdef CONFIG_IRDA_DEBUG
static const char *irlap_event[] = {
"DISCOVERY_REQUEST",
"CONNECT_REQUEST",
@@ -115,6 +116,7 @@
"WD_TIMER_EXPIRED",
"BACKOFF_TIMER_EXPIRED",
};
+#endif
const char *irlap_state[] = {
"LAP_NDM",
diff -ru linux.orig/net/irda/irlmp_event.c linux/net/irda/irlmp_event.c
--- linux.orig/net/irda/irlmp_event.c Thu Oct 25 01:50:55 2001
+++ linux/net/irda/irlmp_event.c Wed Oct 24 23:53:49 2001
@@ -48,6 +48,7 @@
"LSAP_SETUP_PEND",
};
+#ifdef CONFIG_IRDA_DEBUG
static const char *irlmp_event[] = {
"LM_CONNECT_REQUEST",
"LM_CONNECT_CONFIRM",
@@ -74,6 +75,7 @@
"LM_LAP_DISCOVERY_CONFIRM",
"LM_LAP_IDLE_TIMEOUT",
};
+#endif
/* LAP Connection control proto declarations */
static void irlmp_state_standby (struct lap_cb *, IRLMP_EVENT,
--
Andreas Dilger
http://sourceforge.net/projects/ext2resize/
http://www-mddsp.enel.ucalgary.ca/People/adilger/
reply other threads:[~2001-10-28 22:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011028010306.C4229@lynx.no \
--to=adilger@turbolabs.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox