public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Buslogic SCSI hangs with cdrecord
@ 2001-11-14  5:25 George Georgalis
  2001-11-19 17:14 ` George Georgalis
  0 siblings, 1 reply; 2+ messages in thread
From: George Georgalis @ 2001-11-14  5:25 UTC (permalink / raw)
  To: Linux kernel developer's mailing list

Hi All,

Haven't posted or been around in a while so I hope this isn't a rehash.
I didn't find anything in a quick goggle search...

I'm having trouble writing CDs. I'll get from 0% to 75% (varies)
through the process and the whole machine locks up, no oops and nothing
in the log after a restart.

I've been running a 2.2.19-6.2.12 kernel (RH 6.2 updated rpm). And today
I tried using a monolithic vmlinuz-2.2.20 with identical results.

Here is a typical record command, I've tried it at 2, 4 and 8 speed.

cdrecord -v speed=8 dev=0,3,0  -data ~ftp/pub/ISOs/enigma-i386-disc1.iso 

I'm running an AMD Athlon Processor at 1200MHz on a Soyo SY-K7VTA PRO   
board with lots of ram and no other responsibilities.                   

below is the scsi details, has anyone heard of similar problems?

Host: scsi0 Channel: 00 Id: 03 Lun: 00
  Vendor: YAMAHA   Model: CRW8424S         Rev: 1.0j
  Type:   CD-ROM                           ANSI SCSI revision: 02


***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring BusLogic Model BT-930 PCI Ultra SCSI Host Adapter
  Firmware Version: 5.02, I/O Address: 0xD800, IRQ Channel: 11/Level
  PCI Bus: 0, Device: 9, Address: 0xD5000000, Host Adapter SCSI ID: 7
  Parity Checking: Enabled, Extended Translation: Enabled
  Synchronous Negotiation: Fast, Wide Negotiation: Disabled
  Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
  Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments
  Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
  Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
  SCSI Bus Termination: Enabled, SCAM: Disabled
*** BusLogic BT-930 Initialized Successfully ***


// George

(comments on Soyo SY-K7VTA PRO built in sound are also welcome)

-- 
GEORGE GEORGALIS, Principal        http://www.galis.org/george 
System Administration Services      email: george@galis.org 
PGP Key ID: 98311631                  cell: 347-451-8229

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: Buslogic SCSI hangs with cdrecord
  2001-11-14  5:25 Buslogic SCSI hangs with cdrecord George Georgalis
@ 2001-11-19 17:14 ` George Georgalis
  0 siblings, 0 replies; 2+ messages in thread
From: George Georgalis @ 2001-11-19 17:14 UTC (permalink / raw)
  To: Linux kernel developer's mailing list

The problem it turns out was a failing CPU, which got worse but is now better.

// George

On Wed, Nov 14, 2001 at 12:25:13AM -0500, George Georgalis wrote:
>Hi All,
>
>Haven't posted or been around in a while so I hope this isn't a rehash.
>I didn't find anything in a quick goggle search...
>
>I'm having trouble writing CDs. I'll get from 0% to 75% (varies)
>through the process and the whole machine locks up, no oops and nothing
>in the log after a restart.
>
>I've been running a 2.2.19-6.2.12 kernel (RH 6.2 updated rpm). And today
>I tried using a monolithic vmlinuz-2.2.20 with identical results.
>
>Here is a typical record command, I've tried it at 2, 4 and 8 speed.
>
>cdrecord -v speed=8 dev=0,3,0  -data ~ftp/pub/ISOs/enigma-i386-disc1.iso 
>
>I'm running an AMD Athlon Processor at 1200MHz on a Soyo SY-K7VTA PRO   
>board with lots of ram and no other responsibilities.                   
>
>below is the scsi details, has anyone heard of similar problems?
>
>Host: scsi0 Channel: 00 Id: 03 Lun: 00
>  Vendor: YAMAHA   Model: CRW8424S         Rev: 1.0j
>  Type:   CD-ROM                           ANSI SCSI revision: 02
>
>
>***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
>Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
>Configuring BusLogic Model BT-930 PCI Ultra SCSI Host Adapter
>  Firmware Version: 5.02, I/O Address: 0xD800, IRQ Channel: 11/Level
>  PCI Bus: 0, Device: 9, Address: 0xD5000000, Host Adapter SCSI ID: 7
>  Parity Checking: Enabled, Extended Translation: Enabled
>  Synchronous Negotiation: Fast, Wide Negotiation: Disabled
>  Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
>  Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments
>  Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
>  Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
>  SCSI Bus Termination: Enabled, SCAM: Disabled
>*** BusLogic BT-930 Initialized Successfully ***
>
>
>// George
>
>(comments on Soyo SY-K7VTA PRO built in sound are also welcome)
>
>-- 
>GEORGE GEORGALIS, Principal        http://www.galis.org/george 
>System Administration Services      email: george@galis.org 
>PGP Key ID: 98311631                  cell: 347-451-8229
>

-- 
GEORGE GEORGALIS, Principal        http://www.galis.org/george 
System Administration Services      email: george@galis.org 
PGP Key ID: 98311631                  cell: 347-451-8229

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2001-11-19 17:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-11-14  5:25 Buslogic SCSI hangs with cdrecord George Georgalis
2001-11-19 17:14 ` George Georgalis

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox