From: Andrey Panin <pazke@orbita1.ru>
To: linux-kernel@vger.kernel.org, Russell King <rmk@arm.linux.org.uk>,
Tim Waugh <twaugh@redhat.com>
Subject: [PATCH] move SIIG combo cards support to parport_serial.c
Date: Sat, 15 Dec 2001 16:57:39 +0300 [thread overview]
Message-ID: <20011215165739.A201@pazke.ipt> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 493 bytes --]
Hi all,
These patches move SIIG serial & parallel combo cards support from
serial and parport drivers to parport_serial.c (where IMHO it must be).
Untested, but compiles and should work :))
These patches were sended to LKML some months ago, but seems like they
was lost somewhere and I can't remember any answer.
Best regards.
--
Andrey Panin | Embedded systems software engineer
pazke@orbita1.ru | PGP key: http://www.orbita1.ru/~pazke/AndreyPanin.asc
[-- Attachment #1.2: patch-SIIGcombo-parport --]
[-- Type: text/plain, Size: 8478 bytes --]
diff -urN -X /usr/dontdiff /linux.vanilla/drivers/parport/parport_pc.c /linux/drivers/parport/parport_pc.c
--- /linux.vanilla/drivers/parport/parport_pc.c Fri Nov 30 20:16:31 2001
+++ /linux/drivers/parport/parport_pc.c Fri Nov 30 20:19:47 2001
@@ -2628,25 +2628,10 @@
enum parport_pc_pci_cards {
- siig_1s1p_10x_550 = last_sio,
- siig_1s1p_10x_650,
- siig_1s1p_10x_850,
- siig_1p_10x,
+ siig_1p_10x = last_sio,
siig_2p_10x,
- siig_2s1p_10x_550,
- siig_2s1p_10x_650,
- siig_2s1p_10x_850,
siig_1p_20x,
siig_2p_20x,
- siig_2p1s_20x_550,
- siig_2p1s_20x_650,
- siig_2p1s_20x_850,
- siig_1s1p_20x_550,
- siig_1s1p_20x_650,
- siig_1s1p_20x_850,
- siig_2s1p_20x_550,
- siig_2s1p_20x_650,
- siig_2s1p_20x_850,
lava_parallel,
lava_parallel_dual_a,
lava_parallel_dual_b,
@@ -2698,25 +2683,10 @@
BAR is 6) */
} addr[4];
} cards[] __devinitdata = {
- /* siig_1s1p_10x_550 */ { 1, { { 3, 4 }, } },
- /* siig_1s1p_10x_650 */ { 1, { { 3, 4 }, } },
- /* siig_1s1p_10x_850 */ { 1, { { 3, 4 }, } },
/* siig_1p_10x */ { 1, { { 2, 3 }, } },
/* siig_2p_10x */ { 2, { { 2, 3 }, { 4, 5 }, } },
- /* siig_2s1p_10x_550 */ { 1, { { 4, 5 }, } },
- /* siig_2s1p_10x_650 */ { 1, { { 4, 5 }, } },
- /* siig_2s1p_10x_850 */ { 1, { { 4, 5 }, } },
/* siig_1p_20x */ { 1, { { 0, 1 }, } },
/* siig_2p_20x */ { 2, { { 0, 1 }, { 2, 3 }, } },
- /* siig_2p1s_20x_550 */ { 2, { { 1, 2 }, { 3, 4 }, } },
- /* siig_2p1s_20x_650 */ { 2, { { 1, 2 }, { 3, 4 }, } },
- /* siig_2p1s_20x_850 */ { 2, { { 1, 2 }, { 3, 4 }, } },
- /* siig_1s1p_20x_550 */ { 1, { { 1, 2 }, } },
- /* siig_1s1p_20x_650 */ { 1, { { 1, 2 }, } },
- /* siig_1s1p_20x_850 */ { 1, { { 1, 2 }, } },
- /* siig_2s1p_20x_550 */ { 1, { { 2, 3 }, } },
- /* siig_2s1p_20x_650 */ { 1, { { 2, 3 }, } },
- /* siig_2s1p_20x_850 */ { 1, { { 2, 3 }, } },
/* lava_parallel */ { 1, { { 0, -1 }, } },
/* lava_parallel_dual_a */ { 1, { { 0, -1 }, } },
/* lava_parallel_dual_b */ { 1, { { 0, -1 }, } },
@@ -2767,44 +2737,14 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 },
/* PCI cards */
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x_550 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x_650 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x_850 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_10x,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_10x,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_10x },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x_550 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x_650 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x_850 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_20x,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_20x,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_20x },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x_550 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x_650 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x_850 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x_550 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x_650 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x_850 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x_550 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x_650 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x_850 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PARALLEL,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_A,
diff -urN -X /usr/dontdiff /linux.vanilla/drivers/parport/parport_serial.c /linux/drivers/parport/parport_serial.c
--- /linux.vanilla/drivers/parport/parport_serial.c Fri Nov 30 20:16:31 2001
+++ /linux/drivers/parport/parport_serial.c Fri Nov 30 21:09:00 2001
@@ -41,6 +41,11 @@
avlab_2s1p,
avlab_2s1p_650,
avlab_2s1p_850,
+ siig_1s1p_10x,
+ siig_2s1p_10x,
+ siig_2p1s_20x,
+ siig_1s1p_20x,
+ siig_2s1p_20x,
};
@@ -65,6 +70,11 @@
/* avlab_2s1p */ { 1, { { 2, 3}, } },
/* avlab_2s1p_650 */ { 1, { { 2, 3}, } },
/* avlab_2s1p_850 */ { 1, { { 2, 3}, } },
+ /* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
+ /* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
+ /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
+ /* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
+ /* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
};
static struct pci_device_id parport_serial_pci_tbl[] __devinitdata = {
@@ -83,6 +93,37 @@
{ 0x14db, 0x2160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p},
{ 0x14db, 0x2161, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_650},
{ 0x14db, 0x2162, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_850},
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
@@ -98,6 +139,16 @@
int first_uart_offset;
};
+static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
+{
+ return pci_siig10x_fn(dev, NULL, enable);
+}
+
+static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
+{
+ return pci_siig20x_fn(dev, NULL, enable);
+}
+
static struct pci_board_no_ids pci_boards[] __devinitdata = {
/*
* PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
@@ -120,6 +171,11 @@
/* avlab_2s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
+/* siig_1s1p_10x */ { SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn },
+/* siig_2s1p_10x */ { SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn },
+/* siig_2p1s_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
+/* siig_1s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
+/* siig_2s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
};
struct parport_serial_private {
[-- Attachment #1.3: patch-SIIGcombo-serial --]
[-- Type: text/plain, Size: 4605 bytes --]
diff -urN -X /usr/dontdiff /linux.vanilla/drivers/char/serial.c /linux/drivers/char/serial.c
--- /linux.vanilla/drivers/char/serial.c Fri Nov 30 20:15:25 2001
+++ /linux/drivers/char/serial.c Fri Nov 30 20:52:13 2001
@@ -4085,12 +4085,14 @@
* interface chip and different configuration methods:
* - 10x cards have control registers in IO and/or memory space;
* - 20x cards have control registers in standard PCI configuration space.
+ *
+ * SIIG initialization functions exported for use by parport_serial.c module.
*/
#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
-static int __devinit
+int __devinit
pci_siig10x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
{
u16 data, *p;
@@ -4115,11 +4117,12 @@
iounmap(p);
return 0;
}
+EXPORT_SYMBOL(pci_siig10x_fn);
#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
-static int __devinit
+int __devinit
pci_siig20x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
{
u8 data;
@@ -4138,6 +4141,7 @@
}
return 0;
}
+EXPORT_SYMBOL(pci_siig20x_fn);
/* Added for EKF Intel i960 serial boards */
static int __devinit
@@ -4708,15 +4712,6 @@
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig10x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig10x_1 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig10x_1 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig10x_1 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig10x_2 },
@@ -4726,15 +4721,6 @@
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig10x_2 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig10x_2 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig10x_2 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig10x_2 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig10x_4 },
@@ -4753,24 +4739,6 @@
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig20x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_0 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_0 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig20x_2 },
@@ -4778,15 +4746,6 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig20x_2 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_2 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_2 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_siig20x_2 },
- { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_siig20x_2 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
diff -urN -X /usr/dontdiff /linux.vanilla/include/linux/serialP.h /linux/include/linux/serialP.h
--- /linux.vanilla/include/linux/serialP.h Fri Nov 30 20:13:59 2001
+++ /linux/include/linux/serialP.h Fri Nov 30 20:50:37 2001
@@ -157,6 +157,9 @@
struct pci_dev *dev;
};
+extern int pci_siig10x_fn(struct pci_dev *dev, struct pci_board *board, int enable);
+extern int pci_siig20x_fn(struct pci_dev *dev, struct pci_board *board, int enable);
+
#ifndef PCI_ANY_ID
#define PCI_ANY_ID (~0)
#endif
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
next reply other threads:[~2001-12-14 13:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-15 13:57 Andrey Panin [this message]
2001-12-14 13:57 ` [PATCH] move SIIG combo cards support to parport_serial.c Tim Waugh
2001-12-14 16:22 ` Russell King
2001-12-18 13:27 ` Andrey Panin
2001-12-18 0:42 ` Report - fixes needed Kirk Alexander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011215165739.A201@pazke.ipt \
--to=pazke@orbita1.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=rmk@arm.linux.org.uk \
--cc=twaugh@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox