public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Wakko Warner <wakko@animx.eu.org>
To: linux-kernel@vger.kernel.org
Subject: 2.4.16 with es1370 pci
Date: Mon, 31 Dec 2001 06:55:44 -0500	[thread overview]
Message-ID: <20011231065544.A28966@animx.eu.org> (raw)

Every few days my es1370 sound board quits working.  The same thing happened
with  2.2.20.  There's absolutely no kernel messages when this happens. 
This has happened while playing sound on 2.2.20.  When I attempt to play any
sound, it just stops.  Here's part of an strace:

open("/dev/dsp", O_WRONLY)              = 4
ioctl(4, SNDCTL_DSP_GETBLKSIZE, 0x806ae1c) = 0
ioctl(4, SNDCTL_DSP_RESET, 0)           = 0
ioctl(4, SOUND_PCM_READ_BITS, 0xbffff880) = 0
ioctl(4, SNDCTL_DSP_STEREO, 0xbffff87c) = 0
ioctl(4, SOUND_PCM_READ_RATE, 0xbffff878) = 0
write(4, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 16384) = 16384
write(4, "\7\374\276\0\177\3734\1\372\372\252\1Z\372\377\1\264\371"..., 16384) = 16384
write(4, "\275\366\361\5\1\366\\\5\207\365\334\4\5\365E\4t\364e\3"..., 16384) = 16384
write(4, "\312\v\344\20\370\v\262\21\231\n\256\20P\10\"\16\"\6[\v"..., 16384) = 16384
write(4, "\237\375P\376\23\376\310\376\336\376\306\377\256\377{\0"..., 16384) = 16384
write(4, "\31\0\n\2C\376\266\376G\376\313\375\7\0u\0r\1\332\0028"..., 16384) = 16384
write(4, "\330\374\307\374}\375\330\374\23\376\350\374\22\3765\375"..., 16384) = 16384
write(4, "_\374\343\3734\373\372\372H\3721\372\345\371p\371\301\371"..., 16384) = 16384
write(4, " \376+\376Y\377\32\0V\376\244\376n\375\352\374\n\376d\375"..., 16384

The last write just blocks and nothing is played.  This is very annoying and
I have no clue what's going on.

here's LSPCI -v output:
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
        Flags: bus master, medium devsel, latency 64
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0

00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, medium devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fda00000-feafffff
        Prefetchable memory behind bridge: f1800000-f58fffff

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Flags: medium devsel
        I/O ports at ffa0 [disabled] [size=16]

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 15
        I/O ports at ef80 [size=32]

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
        Flags: medium devsel, IRQ 9

00:10.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
        Flags: bus master, medium devsel, latency 64, IRQ 10
        I/O ports at ef00 [size=64]
        Expansion ROM at febe0000 [disabled] [size=64K]

00:11.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 03)
        Subsystem: Adaptec: Unknown device 7895
        Flags: bus master, medium devsel, latency 64, IRQ 5
        I/O ports at e400 [disabled] [size=256]
        Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at febd0000 [disabled] [size=64K]

00:11.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 03)
        Subsystem: Adaptec: Unknown device 7895
        Flags: bus master, medium devsel, latency 64, IRQ 11
        I/O ports at e800 [disabled] [size=256]
        Memory at febff000 (32-bit, non-prefetchable) [size=4K]

00:13.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
        Subsystem: Unknown device 1274:5000
        Flags: bus master, slow devsel, latency 64, IRQ 15
        I/O ports at ee80 [size=64]

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA])
        Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at f2000000 (32-bit, prefetchable) [size=32M]
        Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
        Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at feae0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [f0] AGP version 2.0


The only thing I can see is the fact it's on IRQ 15 with the usb controller.

I honestly don't know why I'm doing this, as no message I ever post gets
answered.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals

             reply	other threads:[~2001-12-31 11:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-12-31 11:55 Wakko Warner [this message]
2001-12-31 13:19 ` 2.4.16 with es1370 pci Alan Cox
     [not found] ` <3C3065CE.1070608@wanadoo.fr>
     [not found]   ` <20011231122440.B29342@animx.eu.org>
     [not found]     ` <3C316C47.4080406@wanadoo.fr>
2002-01-01 15:46       ` Wakko Warner
2002-01-01 17:15         ` Alan Cox
2002-01-04 14:18           ` Roeland Th. Jansen
2002-02-02 20:37           ` Wakko Warner
2002-01-01 18:53         ` Pierre Rousselet
2002-01-02  3:35           ` Wakko Warner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20011231065544.A28966@animx.eu.org \
    --to=wakko@animx.eu.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox