From: aris <aris@cathedrallabs.org>
To: Jacek Pop?awski <jpopl@interia.pl>
Cc: linux-kernel@vger.kernel.org
Subject: Re: eepro (82595) question
Date: Wed, 9 Jan 2002 13:24:08 -0200 [thread overview]
Message-ID: <20020109152408.GF1954@cathedrallabs.org> (raw)
In-Reply-To: <20020104211952.A3508@localhost.localdomain>
In-Reply-To: <20020104211952.A3508@localhost.localdomain>
> I have two 82595FX Ethernet ISA cards. I can load eepro module with
> autodetect=1, irq and io are detected correctly, then I can ifconfig eth0 up,
> but card no works at all (I can ping it, but can't ping something else). I
> tried that card in Win98 - works with "Intel 82595" driver. So I downloaded
> "e10disk.exe" with DOS utils. With softset2.exe I changed irq to 10 and io to
> 0x300. I booted Linux-2.2.19 and loaded eepro, detected again, and now it
> works! But I need to put two cards in one system, so I must find another
> working irq/io. My question is why it doesn't work with many irq/io settings?
> I tried 5 times. Only irq=10, io=0x300 works correctly (on 3 different
> computers). Of course I checked /proc/interrupts and /proc/ioports for
> conflicts. Is it possible that driver is broken? I searched groups.google.com
> and found few posts from people with similiar problem, maybe they couldn't find
> correct softset2.exe and correct irq/io settings?
2.2.19 and 2.2.20 drivers are broken. check for 0.13 version of driver
(http://cathedrallabs.org/~aris/patches/)
--
aris
prev parent reply other threads:[~2002-01-09 15:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-04 20:19 eepro (82595) question Jacek Popławski
2002-01-05 0:17 ` Eyal Lebedinsky
2002-01-09 15:24 ` aris [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020109152408.GF1954@cathedrallabs.org \
--to=aris@cathedrallabs.org \
--cc=jpopl@interia.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox