Re: 2.4.17 Oops when trying to mount ATAPI CDROM

[Manuel McLure <manuel@mclure.org>]

On 2002.02.03 10:21 Manuel McLure wrote:
> 
> On 2002.02.02 22:04 Andre Hedrick wrote:
> >
> > Manuel,
> >
> > Would you be kind enough to be a little more specific on the hardware?
> > The attached devices bu make model and real vender if known.
> kml/
> 
> The CD-ROM is detected as a Pioneer CD-ROM ATAPI Model DR-A24X 0104 - I
> haven't opened the case to look at it but I do recall that it is
> definitely a 24X Pioneer ATAPI CDROM.
> 

Some more information - if I boot without "hdc=noprobe hdc=cdrom", I don't 
get the oops whel loading the "ide-cd" module - instead I get

hdc: set_drive_speed_status: status=0x00 { }
hdc: lost interrupt
hdc: ATAPI 20X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt

The module eventually finishes initializing but is not usable due to the 
"lost interrupt"s.

-- 
Manuel A. McLure KE6TAW | ...for in Ulthar, according to an ancient
<manuel@mclure.org>     | and significant law, no man may kill a cat.
<http://www.mclure.org> |             -- H.P. Lovecraft