* [OOPS] Oops with ide-floppy in 2.5.2 / 2.5.3
@ 2002-02-03 23:56 Taco IJsselmuiden
2002-02-04 6:36 ` Paul Bristow
0 siblings, 1 reply; 4+ messages in thread
From: Taco IJsselmuiden @ 2002-02-03 23:56 UTC (permalink / raw)
To: Paul Bristow; +Cc: linux-kernel
Hi,
the ide-floppy driver (0.98a) produces oops + hang (easy
reproducable) with 2.5.2 (and onwards). doesn't matter if module or
in-kernel. Here's the info when 'using' as module:
taco@brood:~$ cat /proc/version
Linux version 2.5.3-K0 (root@brood) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Fri Feb 1 12:36:54 CET 2002
here's the output from ksymoops:
ksymoops 2.4.3 on i686 2.5.3-K0. Options used
-v vmlinux (specified)
-k /proc/ksyms (specified)
-l /proc/modules (specified)
-o /lib/modules/2.5.3-K0/ (specified)
-m /boot/System.map-2.5.3-K0 (specified)
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01d5f10>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010002
eax: c3f73d24 ebx: c0338ec0 ecx: c0338ec0 edx: c556701c
esi: c7fcd300 edi: 00000000 ebp: 00000002 esp: c02d3e80
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02d3000)
Stack: 00000202 c0338ec0 c0338ec0 c01e8242 c0338ec0 c556701c c0338ec0
c556701c
c556600c c0338ec0 c0338ec0 c02d3ec4 c7fef380 00000000 00000000
c02d3ecc
c02d3ecc 00000000 00000000 c02d3ecc c02d3ecc c8a92358 c0338ec0
c556701c
Call Trace: [<c01e8242>] [<c8a92358>] [<c8a92572>] [<c8a92636>]
[<c01e807d>]
[<c8a92580>] [<c0109a4f>] [<c0109bce>] [<c0106c40>] [<c0106c40>]
[<c0106c40>]
[<c0106c04>] [<c0121f65>] [<c0106cc5>] [<c0105000>] [<c0105019>]
Code: 0f 0b 8b 42 1c a8 04 75 06 83 e0 01 8b 3c 86 89 7a 08 8b 01
>>EIP; c01d5f10 <elevator_linus_add_request+20/60> <=====
Trace; c01e8242 <ide_do_drive_cmd+d2/110>
Trace; c8a92358 <END_OF_CODE+163ea2/????>
Trace; c8a92572 <END_OF_CODE+1640bc/????>
Trace; c8a92636 <END_OF_CODE+164180/????>
Trace; c01e807c <ide_intr+bc/120>
Trace; c8a92580 <END_OF_CODE+1640ca/????>
Trace; c0109a4e <handle_IRQ_event+2e/60>
Trace; c0109bce <do_IRQ+6e/b0>
Trace; c0106c40 <default_idle+0/30>
Trace; c0106c40 <default_idle+0/30>
Trace; c0106c40 <default_idle+0/30>
Trace; c0106c04 <gunzip+4d4/4f0>
Trace; c0121f64 <check_pgt_cache+4/20>
Trace; c0106cc4 <cpu_idle+34/40>
Trace; c0105000 <_stext+0/0>
Trace; c0105018 <rest_init+18/20>
Code; c01d5f10 <elevator_linus_add_request+20/60>
00000000 <_EIP>:
Code; c01d5f10 <elevator_linus_add_request+20/60> <=====
0: 0f 0b ud2a <=====
Code; c01d5f12 <elevator_linus_add_request+22/60>
2: 8b 42 1c mov 0x1c(%edx),%eax
Code; c01d5f14 <elevator_linus_add_request+24/60>
5: a8 04 test $0x4,%al
Code; c01d5f16 <elevator_linus_add_request+26/60>
7: 75 06 jne f <_EIP+0xf> c01d5f1e
<elevator_linus_add_request+2e/60>
Code; c01d5f18 <elevator_linus_add_request+28/60>
9: 83 e0 01 and $0x1,%eax
Code; c01d5f1c <elevator_linus_add_request+2c/60>
c: 8b 3c 86 mov (%esi,%eax,4),%edi
Code; c01d5f1e <elevator_linus_add_request+2e/60>
f: 89 7a 08 mov %edi,0x8(%edx)
Code; c01d5f22 <elevator_linus_add_request+32/60>
12: 8b 01 mov (%ecx),%eax
<0>Kernel panic: Aiee, killing interrupt handler!
here's the oops itself, if usefull ;))
(copied by hand...)
brood:~# insmod ide-floppy
Using /lib/modules/2.5.3-K0/kernel/drivers/ide/ide-floppy.o
ide-floppy driver 0.98a
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01d5f10>] Not tainted
EFLAGS: 00010002
eax: c3f73d24 ebx: c0338ec0 ecx: c0338ec0 edx: c556701c
esi: c7fcd300 edi: 00000000 ebp: 00000002 esp: c02d3e80
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02d3000)
Stack: 00000202 c0338ec0 c0338ec0 c01e8242 c0338ec0 c556701c c0338ec0 c556701c
c556600c c0338ec0 c0338ec0 c02d3ec4 c7fef380 00000000 00000000 c02d3ecc
c02d3ecc 00000000 00000000 c02d3ecc c02d3ecc c8a92358 c0338ec0
c556701c
Call Trace: [<c01e8242>] [<c8a92358>] [<c8a92572>] [<c8a92636>] [<c01e807d>]
[<c8a92580>] [<c0109a4f>] [<c0109bce>] [<c0106c40>] [<c0106c40>] [<c0106c40>]
[<c0106c04>] [<c0121f65>] [<c0106cc5>] [<c0105000>] [<c0105019>]
Code: 0f 0b 8b 42 1c a8 04 75 06 83 e0 01 8b 3c 86 89 7a 08 8b 01
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux brood 2.5.3-K0 #1 Fri Feb 1 12:36:54 CET 2002 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.13
e2fsprogs 1.25
reiserfsprogs 3.x.0j
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded sd_mod usb-storage scsi_mod usb-ohci usbcore
ip_nat_ftp iptable_nat ne 8390 crc32 3c59x
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 1
model name : AMD-K7(tm) Processor
stepping : 2
cpu MHz : 499.043
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat mmx syscall mmxext 3dnowext 3dnow
bogomips : 996.14
cat /proc/modules
sd_mod 9400 0 (unused)
usb-storage 20476 0 (unused)
scsi_mod 66808 1 [sd_mod usb-storage]
usb-ohci 18016 0 (unused)
usbcore 55020 1 [usb-storage usb-ohci]
ip_nat_ftp 3104 0 (unused)
iptable_nat 14644 6 [ip_nat_ftp]
ne 6272 1
8390 5872 0 [ne]
crc32 888 1 [8390]
3c59x 25032 1
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0340-035f : eth1
0376-0376 : ide1
03bc-03be : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
e000-e003 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
e400-e47f : 3Com Corporation 3c900B-Combo [Etherlink XL Combo]
e400-e47f : 00:0a.0
e800-e83f : Ensoniq ES1371 [AudioPCI-97]
e800-e83f : es1371
f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
f000-f007 : ide0
f008-f00f : ide1
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-0026d9bb : Kernel code
0026d9bc-002d049f : Kernel data
d8000000-d9ffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
da000000-dbffffff : PCI Bus #01
da000000-daffffff : nVidia Corporation Vanta [NV6]
dc000000-ddffffff : PCI Bus #01
dc000000-ddffffff : nVidia Corporation Vanta [NV6]
df000000-df000fff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB
df000000-df000fff : usb-ohci
df001000-df00107f : 3Com Corporation 3c900B-Combo [Etherlink XL Combo]
df002000-df002fff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
ffff0000-ffffffff : reserved
if there's any more info you need to figure this one out or patches for me
to test, just let me know...
Cheers,
Taco.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [OOPS] Oops with ide-floppy in 2.5.2 / 2.5.3
2002-02-03 23:56 [OOPS] Oops with ide-floppy in 2.5.2 / 2.5.3 Taco IJsselmuiden
@ 2002-02-04 6:36 ` Paul Bristow
2002-02-04 8:15 ` Jens Axboe
0 siblings, 1 reply; 4+ messages in thread
From: Paul Bristow @ 2002-02-04 6:36 UTC (permalink / raw)
To: linux-kernel
I'll take a look at it.
Taco IJsselmuiden wrote:
> Hi,
>
> the ide-floppy driver (0.98a) produces oops + hang (easy
> reproducable) with 2.5.2 (and onwards). doesn't matter if module or
> in-kernel. Here's the info when 'using' as module:
>
>
> taco@brood:~$ cat /proc/version
> Linux version 2.5.3-K0 (root@brood) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Fri Feb 1 12:36:54 CET 2002
>
> here's the output from ksymoops:
>
> ksymoops 2.4.3 on i686 2.5.3-K0. Options used
> -v vmlinux (specified)
> -k /proc/ksyms (specified)
> -l /proc/modules (specified)
> -o /lib/modules/2.5.3-K0/ (specified)
> -m /boot/System.map-2.5.3-K0 (specified)
>
> invalid operand: 0000
> CPU: 0
> EIP: 0010:[<c01d5f10>] Not tainted
> Using defaults from ksymoops -t elf32-i386 -a i386
> EFLAGS: 00010002
> eax: c3f73d24 ebx: c0338ec0 ecx: c0338ec0 edx: c556701c
> esi: c7fcd300 edi: 00000000 ebp: 00000002 esp: c02d3e80
> ds: 0018 es: 0018 ss: 0018
> Process swapper (pid: 0, stackpage=c02d3000)
> Stack: 00000202 c0338ec0 c0338ec0 c01e8242 c0338ec0 c556701c c0338ec0
> c556701c
> c556600c c0338ec0 c0338ec0 c02d3ec4 c7fef380 00000000 00000000
> c02d3ecc
> c02d3ecc 00000000 00000000 c02d3ecc c02d3ecc c8a92358 c0338ec0
> c556701c
> Call Trace: [<c01e8242>] [<c8a92358>] [<c8a92572>] [<c8a92636>]
> [<c01e807d>]
> [<c8a92580>] [<c0109a4f>] [<c0109bce>] [<c0106c40>] [<c0106c40>]
> [<c0106c40>]
> [<c0106c04>] [<c0121f65>] [<c0106cc5>] [<c0105000>] [<c0105019>]
> Code: 0f 0b 8b 42 1c a8 04 75 06 83 e0 01 8b 3c 86 89 7a 08 8b 01
>
>
>>>EIP; c01d5f10 <elevator_linus_add_request+20/60> <=====
>>>
> Trace; c01e8242 <ide_do_drive_cmd+d2/110>
> Trace; c8a92358 <END_OF_CODE+163ea2/????>
> Trace; c8a92572 <END_OF_CODE+1640bc/????>
> Trace; c8a92636 <END_OF_CODE+164180/????>
> Trace; c01e807c <ide_intr+bc/120>
> Trace; c8a92580 <END_OF_CODE+1640ca/????>
> Trace; c0109a4e <handle_IRQ_event+2e/60>
> Trace; c0109bce <do_IRQ+6e/b0>
> Trace; c0106c40 <default_idle+0/30>
> Trace; c0106c40 <default_idle+0/30>
> Trace; c0106c40 <default_idle+0/30>
> Trace; c0106c04 <gunzip+4d4/4f0>
> Trace; c0121f64 <check_pgt_cache+4/20>
> Trace; c0106cc4 <cpu_idle+34/40>
> Trace; c0105000 <_stext+0/0>
> Trace; c0105018 <rest_init+18/20>
> Code; c01d5f10 <elevator_linus_add_request+20/60>
> 00000000 <_EIP>:
> Code; c01d5f10 <elevator_linus_add_request+20/60> <=====
> 0: 0f 0b ud2a <=====
> Code; c01d5f12 <elevator_linus_add_request+22/60>
> 2: 8b 42 1c mov 0x1c(%edx),%eax
> Code; c01d5f14 <elevator_linus_add_request+24/60>
> 5: a8 04 test $0x4,%al
> Code; c01d5f16 <elevator_linus_add_request+26/60>
> 7: 75 06 jne f <_EIP+0xf> c01d5f1e
> <elevator_linus_add_request+2e/60>
> Code; c01d5f18 <elevator_linus_add_request+28/60>
> 9: 83 e0 01 and $0x1,%eax
> Code; c01d5f1c <elevator_linus_add_request+2c/60>
> c: 8b 3c 86 mov (%esi,%eax,4),%edi
> Code; c01d5f1e <elevator_linus_add_request+2e/60>
> f: 89 7a 08 mov %edi,0x8(%edx)
> Code; c01d5f22 <elevator_linus_add_request+32/60>
> 12: 8b 01 mov (%ecx),%eax
>
> <0>Kernel panic: Aiee, killing interrupt handler!
>
>
> here's the oops itself, if usefull ;))
> (copied by hand...)
>
> brood:~# insmod ide-floppy
> Using /lib/modules/2.5.3-K0/kernel/drivers/ide/ide-floppy.o
> ide-floppy driver 0.98a
> invalid operand: 0000
> CPU: 0
> EIP: 0010:[<c01d5f10>] Not tainted
> EFLAGS: 00010002
> eax: c3f73d24 ebx: c0338ec0 ecx: c0338ec0 edx: c556701c
> esi: c7fcd300 edi: 00000000 ebp: 00000002 esp: c02d3e80
> ds: 0018 es: 0018 ss: 0018
> Process swapper (pid: 0, stackpage=c02d3000)
> Stack: 00000202 c0338ec0 c0338ec0 c01e8242 c0338ec0 c556701c c0338ec0 c556701c
> c556600c c0338ec0 c0338ec0 c02d3ec4 c7fef380 00000000 00000000 c02d3ecc
> c02d3ecc 00000000 00000000 c02d3ecc c02d3ecc c8a92358 c0338ec0
> c556701c
> Call Trace: [<c01e8242>] [<c8a92358>] [<c8a92572>] [<c8a92636>] [<c01e807d>]
> [<c8a92580>] [<c0109a4f>] [<c0109bce>] [<c0106c40>] [<c0106c40>] [<c0106c40>]
> [<c0106c04>] [<c0121f65>] [<c0106cc5>] [<c0105000>] [<c0105019>]
>
> Code: 0f 0b 8b 42 1c a8 04 75 06 83 e0 01 8b 3c 86 89 7a 08 8b 01
> <0>Kernel panic: Aiee, killing interrupt handler!
> In interrupt handler - not syncing
>
>
>
>
> sh ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux brood 2.5.3-K0 #1 Fri Feb 1 12:36:54 CET 2002 i686 unknown
>
> Gnu C 2.95.4
> Gnu make 3.79.1
> util-linux 2.11n
> mount 2.11n
> modutils 2.4.13
> e2fsprogs 1.25
> reiserfsprogs 3.x.0j
> Linux C Library 2.2.5
> Dynamic linker (ldd) 2.2.5
> Procps 2.0.7
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 2.0.11
> Modules Loaded sd_mod usb-storage scsi_mod usb-ohci usbcore
> ip_nat_ftp iptable_nat ne 8390 crc32 3c59x
>
>
>
> cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 1
> model name : AMD-K7(tm) Processor
> stepping : 2
> cpu MHz : 499.043
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
> pat mmx syscall mmxext 3dnowext 3dnow
> bogomips : 996.14
>
>
> cat /proc/modules
> sd_mod 9400 0 (unused)
> usb-storage 20476 0 (unused)
> scsi_mod 66808 1 [sd_mod usb-storage]
> usb-ohci 18016 0 (unused)
> usbcore 55020 1 [usb-storage usb-ohci]
> ip_nat_ftp 3104 0 (unused)
> iptable_nat 14644 6 [ip_nat_ftp]
> ne 6272 1
> 8390 5872 0 [ne]
> crc32 888 1 [8390]
> 3c59x 25032 1
>
>
>
> cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 0340-035f : eth1
> 0376-0376 : ide1
> 03bc-03be : parport0
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 0cf8-0cff : PCI conf1
> e000-e003 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
> Controller
> e400-e47f : 3Com Corporation 3c900B-Combo [Etherlink XL Combo]
> e400-e47f : 00:0a.0
> e800-e83f : Ensoniq ES1371 [AudioPCI-97]
> e800-e83f : es1371
> f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
> f000-f007 : ide0
> f008-f00f : ide1
>
>
> cat /proc/iomem
> 00000000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-07ffffff : System RAM
> 00100000-0026d9bb : Kernel code
> 0026d9bc-002d049f : Kernel data
> d8000000-d9ffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
> Controller
> da000000-dbffffff : PCI Bus #01
> da000000-daffffff : nVidia Corporation Vanta [NV6]
> dc000000-ddffffff : PCI Bus #01
> dc000000-ddffffff : nVidia Corporation Vanta [NV6]
> df000000-df000fff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB
> df000000-df000fff : usb-ohci
> df001000-df00107f : 3Com Corporation 3c900B-Combo [Etherlink XL Combo]
> df002000-df002fff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
> Controller
> ffff0000-ffffffff : reserved
>
>
>
> if there's any more info you need to figure this one out or patches for me
> to test, just let me know...
>
> Cheers,
> Taco.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Paul
Email:
paul@paulbristow.net
Web:
http://paulbristow.net
ICQ:
11965223
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [OOPS] Oops with ide-floppy in 2.5.2 / 2.5.3
2002-02-04 6:36 ` Paul Bristow
@ 2002-02-04 8:15 ` Jens Axboe
2002-02-04 13:41 ` Taco IJsselmuiden
0 siblings, 1 reply; 4+ messages in thread
From: Jens Axboe @ 2002-02-04 8:15 UTC (permalink / raw)
To: Paul Bristow; +Cc: linux-kernel, Taco IJsselmuiden
On Mon, Feb 04 2002, Paul Bristow wrote:
> I'll take a look at it.
One hint is that this bug is triggered when you attempt to add a request
in from of one that has already been started. In case of ide,
ide_do_drive_cmd with ide_preempt would trigger this. That may or may
not be a bug, depends on if the driver knows what it is doing or not.
If the driver knows what it is doing, then this patch should cure your
problem.
--- drivers/ide/ide.c~ Mon Feb 4 09:12:10 2002
+++ drivers/ide/ide.c Mon Feb 4 09:14:39 2002
@@ -1784,6 +1784,8 @@
if (blk_queue_empty(&drive->queue) || action == ide_preempt) {
if (action == ide_preempt)
hwgroup->rq = NULL;
+ if (!blk_queue_empty(&drive->queue))
+ list_entry_rq(queue_head)->flags &= ~REQ_STARTED;
} else {
if (action == ide_wait || action == ide_end) {
queue_head = queue_head->prev;
--
Jens Axboe
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [OOPS] Oops with ide-floppy in 2.5.2 / 2.5.3
2002-02-04 8:15 ` Jens Axboe
@ 2002-02-04 13:41 ` Taco IJsselmuiden
0 siblings, 0 replies; 4+ messages in thread
From: Taco IJsselmuiden @ 2002-02-04 13:41 UTC (permalink / raw)
To: Jens Axboe; +Cc: Paul Bristow, linux-kernel
Jens, Paul,
> If the driver knows what it is doing, then this patch should cure your
> problem.
>
> --- drivers/ide/ide.c~ Mon Feb 4 09:12:10 2002
> +++ drivers/ide/ide.c Mon Feb 4 09:14:39 2002
> @@ -1784,6 +1784,8 @@
> if (blk_queue_empty(&drive->queue) || action == ide_preempt) {
> if (action == ide_preempt)
> hwgroup->rq = NULL;
> + if (!blk_queue_empty(&drive->queue))
> + list_entry_rq(queue_head)->flags &= ~REQ_STARTED;
> } else {
> if (action == ide_wait || action == ide_end) {
> queue_head = queue_head->prev;
>
when using this in vanilla 2.5.3 it continues to oops.
But, when using Ingo's K0 on top of 2.5.3 it 'works' with this patch.
That is: it doesn't oops.
it now just goes:
brood:~# insmod ide-floppy
using /lib/modules/2.5.3-K0/kernel/drivers/ide/ide-floppy.o
ide-floppy driver 0.98a
hdd: 98304kB, 196608 blocks, 512 sector size
and doesn't return to the prompt
and /proc/modules has
ide-floppy 11744 (initializing)
(even after waiting a _LONG_ time....)
Cheers,
Taco.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-02-04 13:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-02-03 23:56 [OOPS] Oops with ide-floppy in 2.5.2 / 2.5.3 Taco IJsselmuiden
2002-02-04 6:36 ` Paul Bristow
2002-02-04 8:15 ` Jens Axboe
2002-02-04 13:41 ` Taco IJsselmuiden
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox