From: Pavel Machek <pavel@suse.cz>
To: kernel list <linux-kernel@vger.kernel.org>
Subject: Warning, 2.5.3 eats filesystems
Date: Tue, 5 Feb 2002 20:28:26 +0100 [thread overview]
Message-ID: <20020205192826.GA112@elf.ucw.cz> (raw)
Hi!
2.5.3 managed to damage my ext2 filesystem (few lost directories);
beware.
Pavel
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 10b9:1647 (Acer Laboratories Inc. [ALi]) (rev 4).
Prefetchable 32 bit memory at 0xf0000000 [0xf3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Acer Laboratories Inc. [ALi] M5247 (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 2, function 0:
USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 3).
IRQ 9.
Master Capable. Latency=16. Max Lat=80.
Non-prefetchable 32 bit memory at 0xfff70000 [0xfff70fff].
Bus 0, device 4, function 0:
CardBus bridge: Texas Instruments PCI1420 (rev 0).
IRQ 11.
Master Capable. Latency=168. Min Gnt=192.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
Bus 0, device 4, function 1:
CardBus bridge: Texas Instruments PCI1420 (#2) (rev 0).
IRQ 11.
Master Capable. Latency=168. Min Gnt=192.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff].
Bus 0, device 6, function 0:
Bridge: Acer Laboratories Inc. [ALi] M7101 PMU (rev 0).
Bus 0, device 7, function 0:
ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev 0).
Bus 0, device 8, function 0:
Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 18).
IRQ 5.
Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0x1400 [0x14ff].
Bus 0, device 8, function 1:
Communication controller: ESS Technology ESS Modem (rev 18).
IRQ 5.
I/O at 0x1800 [0x18ff].
Bus 0, device 15, function 0:
IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev 195).
Master Capable. Latency=64. Min Gnt=2.Max Lat=4.
I/O at 0x1000 [0x100f].
Bus 0, device 16, function 0:
Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 17).
IRQ 11.
Master Capable. Latency=64. Min Gnt=255.Max Lat=255.
I/O at 0x1c00 [0x1cff].
Non-prefetchable 32 bit memory at 0xea001000 [0xea0013ff].
Bus 1, device 0, function 0:
VGA compatible controller: Trident Microsystems CyberBlade/XP (rev 99).
IRQ 11.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xee000000 [0xefffffff].
Non-prefetchable 32 bit memory at 0xea400000 [0xea7fffff].
Non-prefetchable 32 bit memory at 0xec000000 [0xedffffff].
Non-prefetchable 32 bit memory at 0xea100000 [0xea107fff].
--
(about SSSCA) "I don't say this lightly. However, I really think that the U.S.
no longer is classifiable as a democracy, but rather as a plutocracy." --hpa
next reply other threads:[~2002-02-05 20:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-05 19:28 Pavel Machek [this message]
2002-02-05 23:14 ` Warning, 2.5.3 eats filesystems Daniel Pittman
2002-02-06 0:59 ` Skip Ford
2002-02-06 1:39 ` Dave Jones
2002-02-06 4:59 ` Daniel Pittman
2002-02-06 15:42 ` Pavel Machek
2002-02-06 23:30 ` Heinz Diehl
2002-02-06 23:39 ` Alexander Viro
2002-02-07 20:34 ` Heinz Diehl
2002-02-08 10:50 ` Pavel Machek
2002-02-08 21:48 ` Heinz Diehl
2002-02-08 11:14 ` Pavel Machek
2002-02-08 21:50 ` Andre Hedrick
2002-02-08 11:36 ` WARNING: 2.5.3 -- IDE damages data! [was Re: Warning, 2.5.3 eats filesystems] Pavel Machek
2002-02-06 17:49 ` Warning, 2.5.3 eats filesystems Olaf Zaplinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020205192826.GA112@elf.ucw.cz \
--to=pavel@suse.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox