public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Vojtech Pavlik <vojtech@suse.cz>
To: Hal Duston <hald@sound.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Input w/2.5.3-dj3
Date: Sat, 9 Feb 2002 18:00:40 +0100	[thread overview]
Message-ID: <20020209180040.B18474@suse.cz> (raw)
In-Reply-To: <Pine.GSO.4.10.10202081309380.9070-100000@sound.net>
In-Reply-To: <Pine.GSO.4.10.10202081309380.9070-100000@sound.net>; from hald@sound.net on Fri, Feb 08, 2002 at 01:12:05PM -0600

On Fri, Feb 08, 2002 at 01:12:05PM -0600, Hal Duston wrote:
> I have disabled CONTIG_KEYBOARD_XTKBD again.
> 
> Here are the things that might be relevant.
> 
> BTW, this is an IBM Thinkpad 700 PS/2.
> (Microchannel bus)
> 
> Thanks,
> Hal Duston
> hald@sound.net

Thanks for the log, it seems the atkbd.c driver just times out. Can you
change the "timeout" values in drivers/input/keyboard/atkbd.c in the
functions "atkbd_sendbyte" and "atkbd_command" to about ten times the
current values?

That should fix the problem. In either case, please tell me.

> 
> --  Begin console --
>  . . .
> Micro Channel bus detected.
>  . . .
> mice: PS/2 mouse device common for all mice
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: PS/2 Generic Mouse on isa0060/serio1
> serio: AUX port at 0x60,0x64 irq 12
>  . . .
> --  End console --
> 
> --  Begin /var/log/debug --
> i8042.c: 20 -> i8042 (command) [0]
> i8042.c: 25 <- i8042 (return) [0]
> i8042.c: 60 -> i8042 (command) [0]
> i8042.c: 34 -> i8042 (parameter) [0]
> i8042.c: 60 -> i8042 (command) [0]
> i8042.c: 25 -> i8042 (parameter) [0]
> i8042.c: f6 -> i8042 (kbd-data) [0]
> i8042.c: fa <- i8042 (interrupt-kbd) [0]
> i8042.c: f2 -> i8042 (kbd-data) [0]
> i8042.c: 60 -> i8042 (command) [1]
> i8042.c: 34 -> i8042 (parameter) [1]
> i8042.c: 60 -> i8042 (command) [2]
> i8042.c: 25 -> i8042 (parameter) [2]
> i8042.c: fa <- i8042 (interrupt-kbd) [2]
> atkbd.c: Sent: f5
> i8042.c: f5 -> i8042 (kbd-data) [2]
> i8042.c: 60 -> i8042 (command) [2]
> i8042.c: 34 -> i8042 (parameter) [2]
> i8042.c: fa <- i8042 (flush) [3]
> i8042.c: d3 -> i8042 (command) [3]
> i8042.c: 5a -> i8042 (parameter) [3]
> i8042.c: a5 <- i8042 (return) [3]
> i8042.c: a9 -> i8042 (command) [3]
> i8042.c: 00 <- i8042 (return) [3]
> i8042.c: a7 -> i8042 (command) [3]
> i8042.c: 20 -> i8042 (command) [3]
> i8042.c: 34 <- i8042 (return) [3]
> i8042.c: a9 -> i8042 (command) [3]
> i8042.c: 00 <- i8042 (return) [3]
> i8042.c: a8 -> i8042 (command) [3]
> i8042.c: 20 -> i8042 (command) [3]
> i8042.c: 14 <- i8042 (return) [3]
> i8042.c: 60 -> i8042 (command) [3]
> i8042.c: 34 -> i8042 (parameter) [3]
> i8042.c: 60 -> i8042 (command) [3]
> i8042.c: 16 -> i8042 (parameter) [3]
> i8042.c: d4 -> i8042 (command) [4]
> i8042.c: f6 -> i8042 (parameter) [4]
> i8042.c: 60 -> i8042 (command) [4]
> i8042.c: 16 -> i8042 (parameter) [4]
> i8042.c: fa <- i8042 (interrupt-aux) [4]
> i8042.c: d4 -> i8042 (command) [4]
> i8042.c: f2 -> i8042 (parameter) [4]
> i8042.c: 60 -> i8042 (command) [4]
> i8042.c: 16 -> i8042 (parameter) [4]
> i8042.c: fa <- i8042 (interrupt-aux) [4]
> i8042.c: 00 <- i8042 (interrupt-aux) [4]
> i8042.c: d4 -> i8042 (command) [5]
> i8042.c: e8 -> i8042 (parameter) [5]
> i8042.c: 60 -> i8042 (command) [5]
> i8042.c: 16 -> i8042 (parameter) [5]
> i8042.c: fa <- i8042 (interrupt-aux) [5]
> i8042.c: d4 -> i8042 (command) [5]
> i8042.c: 03 -> i8042 (parameter) [5]
> i8042.c: 60 -> i8042 (command) [5]
> i8042.c: 16 -> i8042 (parameter) [5]
> i8042.c: fa <- i8042 (interrupt-aux) [5]
> i8042.c: d4 -> i8042 (command) [5]
> i8042.c: e6 -> i8042 (parameter) [5]
> i8042.c: 60 -> i8042 (command) [5]
> i8042.c: 16 -> i8042 (parameter) [5]
> i8042.c: fa <- i8042 (interrupt-aux) [6]
> i8042.c: d4 -> i8042 (command) [6]
> i8042.c: e6 -> i8042 (parameter) [6]
> i8042.c: 60 -> i8042 (command) [6]
> i8042.c: 16 -> i8042 (parameter) [6]
> i8042.c: fa <- i8042 (interrupt-aux) [6]
> i8042.c: d4 -> i8042 (command) [6]
> i8042.c: e6 -> i8042 (parameter) [6]
> i8042.c: 60 -> i8042 (command) [6]
> i8042.c: 16 -> i8042 (parameter) [6]
> i8042.c: fa <- i8042 (interrupt-aux) [7]
> i8042.c: d4 -> i8042 (command) [7]
> i8042.c: e9 -> i8042 (parameter) [7]
> i8042.c: 60 -> i8042 (command) [7]
> i8042.c: 16 -> i8042 (parameter) [7]
> i8042.c: fa <- i8042 (interrupt-aux) [7]
> i8042.c: 00 <- i8042 (interrupt-aux) [7]
> i8042.c: 03 <- i8042 (interrupt-aux) [7]
> i8042.c: 64 <- i8042 (interrupt-aux) [8]
> i8042.c: d4 -> i8042 (command) [8]
> i8042.c: e8 -> i8042 (parameter) [8]
> i8042.c: 60 -> i8042 (command) [8]
> i8042.c: 16 -> i8042 (parameter) [8]
> i8042.c: fa <- i8042 (interrupt-aux) [8]
> i8042.c: d4 -> i8042 (command) [8]
> i8042.c: 00 -> i8042 (parameter) [8]
> i8042.c: 60 -> i8042 (command) [8]
> i8042.c: 16 -> i8042 (parameter) [8]
> i8042.c: fa <- i8042 (interrupt-aux) [8]
> i8042.c: d4 -> i8042 (command) [8]
> i8042.c: e6 -> i8042 (parameter) [8]
> i8042.c: 60 -> i8042 (command) [9]
> i8042.c: 16 -> i8042 (parameter) [9]
> i8042.c: fa <- i8042 (interrupt-aux) [9]
> i8042.c: d4 -> i8042 (command) [9]
> i8042.c: e6 -> i8042 (parameter) [9]
> i8042.c: 60 -> i8042 (command) [9]
> i8042.c: 16 -> i8042 (parameter) [9]
> i8042.c: fa <- i8042 (interrupt-aux) [9]
> i8042.c: d4 -> i8042 (command) [9]
> i8042.c: e6 -> i8042 (parameter) [9]
> i8042.c: 60 -> i8042 (command) [9]
> i8042.c: 16 -> i8042 (parameter) [9]
> i8042.c: fa <- i8042 (interrupt-aux) [10]
> i8042.c: d4 -> i8042 (command) [10]
> i8042.c: e9 -> i8042 (parameter) [10]
> i8042.c: 60 -> i8042 (command) [10]
> i8042.c: 16 -> i8042 (parameter) [10]
> i8042.c: fa <- i8042 (interrupt-aux) [10]
> i8042.c: 00 <- i8042 (interrupt-aux) [10]
> i8042.c: 00 <- i8042 (interrupt-aux) [11]
> i8042.c: 64 <- i8042 (interrupt-aux) [11]
> i8042.c: d4 -> i8042 (command) [11]
> i8042.c: f3 -> i8042 (parameter) [11]
> i8042.c: 60 -> i8042 (command) [11]
> i8042.c: 16 -> i8042 (parameter) [11]
> i8042.c: fa <- i8042 (interrupt-aux) [11]
> i8042.c: d4 -> i8042 (command) [11]
> i8042.c: c8 -> i8042 (parameter) [11]
> i8042.c: 60 -> i8042 (command) [11]
> i8042.c: 16 -> i8042 (parameter) [11]
> i8042.c: fa <- i8042 (interrupt-aux) [11]
> i8042.c: d4 -> i8042 (command) [11]
> i8042.c: f3 -> i8042 (parameter) [11]
> i8042.c: 60 -> i8042 (command) [12]
> i8042.c: 16 -> i8042 (parameter) [12]
> i8042.c: fa <- i8042 (interrupt-aux) [12]
> i8042.c: d4 -> i8042 (command) [12]
> i8042.c: 64 -> i8042 (parameter) [12]
> i8042.c: 60 -> i8042 (command) [12]
> i8042.c: 16 -> i8042 (parameter) [12]
> i8042.c: fa <- i8042 (interrupt-aux) [12]
> i8042.c: d4 -> i8042 (command) [12]
> i8042.c: f3 -> i8042 (parameter) [12]
> i8042.c: 60 -> i8042 (command) [12]
> i8042.c: 16 -> i8042 (parameter) [12]
> i8042.c: fa <- i8042 (interrupt-aux) [13]
> i8042.c: d4 -> i8042 (command) [13]
> i8042.c: 50 -> i8042 (parameter) [13]
> i8042.c: 60 -> i8042 (command) [13]
> i8042.c: 16 -> i8042 (parameter) [13]
> i8042.c: fa <- i8042 (interrupt-aux) [13]
> i8042.c: d4 -> i8042 (command) [13]
> i8042.c: f2 -> i8042 (parameter) [13]
> i8042.c: 60 -> i8042 (command) [13]
> i8042.c: 16 -> i8042 (parameter) [13]
> i8042.c: fa <- i8042 (interrupt-aux) [14]
> i8042.c: 00 <- i8042 (interrupt-aux) [14]
> i8042.c: d4 -> i8042 (command) [14]
> i8042.c: f3 -> i8042 (parameter) [14]
> i8042.c: 60 -> i8042 (command) [14]
> i8042.c: 16 -> i8042 (parameter) [14]
> i8042.c: fa <- i8042 (interrupt-aux) [14]
> i8042.c: d4 -> i8042 (command) [14]
> i8042.c: 64 -> i8042 (parameter) [14]
> i8042.c: 60 -> i8042 (command) [15]
> i8042.c: 16 -> i8042 (parameter) [15]
> i8042.c: fa <- i8042 (interrupt-aux) [15]
> i8042.c: d4 -> i8042 (command) [15]
> i8042.c: f3 -> i8042 (parameter) [15]
> i8042.c: 60 -> i8042 (command) [15]
> i8042.c: 16 -> i8042 (parameter) [15]
> i8042.c: fa <- i8042 (interrupt-aux) [15]
> i8042.c: d4 -> i8042 (command) [15]
> i8042.c: c8 -> i8042 (parameter) [15]
> i8042.c: 60 -> i8042 (command) [15]
> i8042.c: 16 -> i8042 (parameter) [15]
> i8042.c: fa <- i8042 (interrupt-aux) [16]
> i8042.c: d4 -> i8042 (command) [16]
> i8042.c: e8 -> i8042 (parameter) [16]
> i8042.c: 60 -> i8042 (command) [16]
> i8042.c: 16 -> i8042 (parameter) [16]
> i8042.c: fa <- i8042 (interrupt-aux) [16]
> i8042.c: d4 -> i8042 (command) [16]
> i8042.c: 03 -> i8042 (parameter) [16]
> i8042.c: 60 -> i8042 (command) [16]
> i8042.c: 16 -> i8042 (parameter) [16]
> i8042.c: fa <- i8042 (interrupt-aux) [16]
> i8042.c: d4 -> i8042 (command) [16]
> i8042.c: e6 -> i8042 (parameter) [16]
> i8042.c: 60 -> i8042 (command) [17]
> i8042.c: 16 -> i8042 (parameter) [17]
> i8042.c: fa <- i8042 (interrupt-aux) [17]
> i8042.c: d4 -> i8042 (command) [17]
> i8042.c: ea -> i8042 (parameter) [17]
> i8042.c: 60 -> i8042 (command) [17]
> i8042.c: 16 -> i8042 (parameter) [17]
> i8042.c: fa <- i8042 (interrupt-aux) [17]
> i8042.c: d4 -> i8042 (command) [17]
> i8042.c: f4 -> i8042 (parameter) [17]
> i8042.c: 60 -> i8042 (command) [18]
> i8042.c: 16 -> i8042 (parameter) [18]
> i8042.c: fa <- i8042 (interrupt-aux) [18]
> --  End /var/log/debug --

-- 
Vojtech Pavlik
SuSE Labs

  reply	other threads:[~2002-02-09 17:01 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-02-08 19:12 Input w/2.5.3-dj3 Hal Duston
2002-02-09 17:00 ` Vojtech Pavlik [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-02-14 19:24 Hal Duston
2002-02-15  0:22 ` Vojtech Pavlik
2002-02-12  1:00 Hal Duston
2002-02-12  9:00 ` Vojtech Pavlik
2002-02-11 20:39 Hal Duston
2002-02-11 20:55 ` Vojtech Pavlik
2002-02-11 17:56 Hal Duston
2002-02-11 17:58 ` Vojtech Pavlik
2002-02-07 17:55 Hal Duston
2002-02-08  7:17 ` Vojtech Pavlik
2002-02-07 16:43 Hal Duston
2002-02-07 16:51 ` Dave Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20020209180040.B18474@suse.cz \
    --to=vojtech@suse.cz \
    --cc=hald@sound.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox