From: rwhron@earthlink.net
To: linux-kernel@vger.kernel.org
Subject: Opss! on 2.5.6 with ReiserFS
Date: Sun, 10 Mar 2002 14:26:09 -0500 [thread overview]
Message-ID: <20020310142609.A22174@rushmore> (raw)
I have got oops at boot time from 2.5.6-pre3 and 2.5.6 on
system with reiserfs root filesystem on ide. Oops occurs
during attempt to mount /. No modules in kernel.
2.5.6-pre2 was okay.
2.5.6:
Unable to handle kernel NULL pointer dereference at virtual address 00000010
c012cae6
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c012cae6>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010292
eax: d8802000 ebx: 0000000f ecx: 00000009 edx: 00000000
esi: 00000009 edi: 00002012 ebp: 00000000 esp: c143bd7c
ds: 0018 es: 0018 ss: 0018
Stack: 00001000 00002012 00000000 d7e9a800 c0123f4b c012cfdb 00000000 00002012
00001000 d7e9a800 d7e54000 d88133ec c012d19c 00000000 00002012 00001000
d7e9a800 c018cb53 00000000 00002012 00001000 00000400 00000000 d7e9a954
Call Trace: [<c0123f4b>] [<c012cfdb>] [<c012d19c>] [<c018cb53>] [<c012c480>]
[<c017f486>] [<c017fd43>] [<c0195402>] [<c0130329>] [<c0180112>] [<c017fc1c>]
[<c01304cf>] [<c013ecb8>] [<c013ef6e>] [<c013edd4>] [<c013f2e0>] [<c01051e9>]
[<c0105028>] [<c0105550>]
Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 25 ff ff 00 00 89 44
>>EIP; c012cae6 <__get_hash_table+1a/9c> <=====
Trace; c0123f4b <__vmalloc+fb/1c0>
Trace; c012cfdb <__getblk+17/38>
Trace; c012d19c <__bread+14/6c>
Trace; c018cb53 <journal_init+eb/68c>
Trace; c012c480 <__wait_on_buffer+84/90>
Trace; c017f486 <read_bitmaps+ce/160>
Trace; c017fd43 <reiserfs_fill_super+127/490>
Trace; c0195402 <sprintf+12/18>
Trace; c0130329 <get_sb_bdev+22d/29c>
Trace; c0180112 <reiserfs_get_sb+1a/20>
Trace; c017fc1c <reiserfs_fill_super+0/490>
Trace; c01304cf <do_kern_mount+47/c4>
Trace; c013ecb8 <do_add_mount+64/130>
Trace; c013ef6e <do_mount+14a/164>
Trace; c013edd4 <copy_mount_options+50/a0>
Trace; c013f2e0 <sys_mount+7c/bc>
Trace; c01051e9 <prepare_namespace+a9/e0>
Trace; c0105028 <init+c/124>
Trace; c0105550 <kernel_thread+28/38>
Code; c012cae6 <__get_hash_table+1a/9c>
00000000 <_EIP>:
Code; c012cae6 <__get_hash_table+1a/9c> <=====
0: 0f b7 45 10 movzwl 0x10(%ebp),%eax <=====
Code; c012caea <__get_hash_table+1e/9c>
4: b0 00 mov $0x0,%al
Code; c012caec <__get_hash_table+20/9c>
6: 66 0f b6 55 10 movzbw 0x10(%ebp),%dx
Code; c012caf1 <__get_hash_table+25/9c>
b: 01 d0 add %edx,%eax
Code; c012caf3 <__get_hash_table+27/9c>
d: 25 ff ff 00 00 and $0xffff,%eax
Code; c012caf8 <__get_hash_table+2c/9c>
12: 89 44 00 00 mov %eax,0x0(%eax,%eax,1)
<0>Kernel panic: Attempted to kill init!
2.5.6-pre3 oops looks almost identical. It is at
http://home.earthlink.net/~rwhron/kernel/2.5.6p3.ksymoops
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_MK6=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BLK_DEV_FD=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=64
CONFIG_REISERFS_FS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_MSDOS_PARTITION=y
CONFIG_VGA_CONSOLE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
--
Randy Hron
next reply other threads:[~2002-03-10 19:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-10 19:26 rwhron [this message]
2002-03-10 21:57 ` Opss! on 2.5.6 with ReiserFS Sebastian Droege
2002-03-11 6:44 ` Oleg Drokin
-- strict thread matches above, loose matches on Subject: below --
2002-03-11 11:19 rwhron
2002-03-10 15:58 system_lists
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020310142609.A22174@rushmore \
--to=rwhron@earthlink.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox