From: Tom Rini <trini@kernel.crashing.org>
To: Martin Dalecki <martin@dalecki.de>, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] Actually hide x86 IDE chipsets on !CONFIG_X86
Date: Thu, 14 Mar 2002 09:50:18 -0700 [thread overview]
Message-ID: <20020314165018.GE706@opus.bloom.county> (raw)
Hello. The following actually hides x86-specific drivers on
!CONFIG_X86. The problem is that dep_bool '...' CONFIG_FOO $CONFIG_BAR
doesn't have the desired effect if CONFIG_BAR isn't set.
--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
===== drivers/ide/Config.in 1.11 vs edited =====
--- 1.11/drivers/ide/Config.in Wed Mar 13 06:36:45 2002
+++ edited/drivers/ide/Config.in Thu Mar 14 09:47:19 2002
@@ -9,7 +9,9 @@
dep_tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE $CONFIG_IDE
comment 'Please see Documentation/ide.txt for help/info on IDE drives'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
- dep_bool ' Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE $CONFIG_X86
+ if [ "$CONFIG_X86" = "y" ]; then
+ bool ' Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE
+ fi
define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_IDE
dep_tristate ' Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
@@ -34,11 +36,15 @@
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
comment 'IDE chipset support'
- dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
- dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
+ if [ "$CONFIG_X86" = "y" ]; then
+ bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640
+ dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
+ fi
dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then
- dep_bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
+ if [ "$CONFIG_X86" = "y" ]; then
+ bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000
+ fi
bool ' Generic PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then
bool ' Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD
@@ -75,9 +81,11 @@
dep_bool ' PROMISE PDC202{46|62|65|67|68|69|70} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
- dep_bool ' ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
- dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
- dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
+ if [ "$CONFIG_X86" = "y" ]; then
+ dep_bool ' ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI
+ fi
dep_bool ' Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
fi
next reply other threads:[~2002-03-14 16:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-14 16:50 Tom Rini [this message]
2002-03-14 17:11 ` [PATCH] Actually hide x86 IDE chipsets on !CONFIG_X86 Dave Jones
2002-03-14 17:24 ` Tom Rini
2002-03-14 18:41 ` Vojtech Pavlik
2002-03-14 18:56 ` Tom Rini
2002-03-14 18:58 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020314165018.GE706@opus.bloom.county \
--to=trini@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin@dalecki.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox