From: Mike Fedyk <mfedyk@matchmail.com>
To: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.4.19pre2-ac1
Date: Fri, 15 Mar 2002 19:01:37 -0800 [thread overview]
Message-ID: <20020316030137.GC23938@matchmail.com> (raw)
In-Reply-To: <E16gyy2-0005oW-00@the-village.bc.nu>
In-Reply-To: <E16gyy2-0005oW-00@the-village.bc.nu>
--- 2.4.19-pre1-ac2 Fri Mar 15 18:59:32 2002
+++ 2.4.19-pre2-ac1 Fri Mar 15 18:57:44 2002
@@ -41,37 +66,37 @@
o Fix trap when extending a single extent of (Dave Kleikamp)
over 64Gb in JFS
* NBD deadlock fix (Steven Whitehouse)
-+ Fix device ref counting in netrom stack (Tomi Manninen)
+* Fix device ref counting in netrom stack (Tomi Manninen)
* Fix shmemfs link counting (Christoph Rohland)
-+ Fix potential scsi disk oops (Peter Wong)
+* Fix potential scsi disk oops (Peter Wong)
* eepro100 carrier init fix (Jeff Garzik)
-+ Fix wrong kfree in netrom stack (Tomi Manninen)
-+ Add TI1250 inits to ZV bus support (me)
+* Fix wrong kfree in netrom stack (Tomi Manninen)
+* Add TI1250 inits to ZV bus support (me)
| Zoom video now works on the IBM TP600 at least..
-+ Fix off by one on loop devices limit (Heinz Mauelshagen)
+* Fix off by one on loop devices limit (Heinz Mauelshagen)
o Improve handling of psaux open with no mouse (Christoph Hellwig)
present
-+ 3COM 3c359 token ring driver (Mike Phillips)
+* 3COM 3c359 token ring driver (Mike Phillips)
* Fix a case where hpfs didnt set block size (Chris Mason)
early enough
-+ Remove use of lock_kernel in softdog driver (me)
-+ Make olympic driver use spinlocks not (Mike Phillips)
+* Remove use of lock_kernel in softdog driver (me)
+* Make olympic driver use spinlocks not (Mike Phillips)
lock_kernel
o Fix type of detected devices in md.c (Jakob Kemi)
-+ Changes and defconfig update (Niels Jensen)
+* Changes and defconfig update (Niels Jensen)
o PNP BIOS driver updates (Thomas Hood)
-+ Turn off excess printks in pnp quirk reporting (Andrey Panin)
-o Add documentation for ITE I2C (Steven Cole)
+* Turn off excess printks in pnp quirk reporting (Andrey Panin)
+* Add documentation for ITE I2C (Steven Cole)
o Add documentation for other zoran cards (Steven Cole)
o Add an SC520 watchdog, and enable wd8387ff (Scott Jennings)
o Cleaned up and fixed some SC520 watchdog bugs (me)
| Scott - can you double check these
-+ Fix return on generic lib/string.c memcmp (Georg Nikodym)
-+ Further zoom video cleanups (me)
+* Fix return on generic lib/string.c memcmp (Georg Nikodym)
+* Further zoom video cleanups (me)
Linux 2.4.18rc2-ac1
o Merge with 2.4.18rc2
-+ Ignore i810 modem codecs (me)
+* Ignore i810 modem codecs (me)
o Core of address space accounting code (me)
| Enforcement, ptrace and some shmem corner bits to do
* Fix security hole in shmfs (me)
@@ -84,23 +109,23 @@
o Make i2o_pci.c 64bit/BE clean (me)
o Maybe fix crash on i2o scsi abort/reset paths (me)
o Make i2o use the passed scsi direction flag (me)
-+ Fix awk failure path in menuconfig (Andrew Church)
+* Fix awk failure path in menuconfig (Andrew Church)
o Merge varies doc updates (Steven Cole)
o Add serial support for the Lava Octopus-550 (Jim Treadway)
* OPL3SA2 cleanup (Zwane Mwaikambo)
o Add missing blkdev_varyio export (Todd Roy)
-o/+ Update Changes file, config and experimental (Niels Jensen)
+o/* Update Changes file, config and experimental (Niels Jensen)
checks
-+ Fix highmem warning in aacraid (Andrew Morton)
-+ Make tpqic02 use new style request region (Marcus Alanen)
+* Fix highmem warning in aacraid (Andrew Morton)
+* Make tpqic02 use new style request region (Marcus Alanen)
o Only turn off mediagx/geode TSC on 5510/5520 (me)
| From information provided by Hiroshi MIURA
-+ Massively clean up the AGP enable and bugfix it (Bjorn Helgaas)
+* Massively clean up the AGP enable and bugfix it (Bjorn Helgaas)
o Fix oops if you try to use the RW wq locks (Bob Miller)
o Remove FPU usage in neomagic fb (Denis Kropp)
o Merge IBM JFS (Steve Best, Dave Kleikamp,
Barry Arndt, Christoph Hellwig, ..)
-+ Updated sis frame buffer driver (Thomas Winischhofer)
+* Updated sis frame buffer driver (Thomas Winischhofer)
Linux 2.4.18pre9-ac3
* Clean up various macros and misuse of ; (Timothy Ball)
@@ -113,15 +138,15 @@
Abraham vd Merwe
and others)
o IBM Lanstreamer updates (Mike Phillips)
-+ Fix acct rlimit problem (I hope) (me)
+* Fix acct rlimit problem (I hope) (me)
| Problem noted by Ian Allen
o Automatically set file limits based on mem size (Andi Kleen)
-+ Correct scsi reservation conflict handling (James Bottomley)
+* Correct scsi reservation conflict handling (James Bottomley)
and add the scsi reset api code
o Add further kernel docs (me)
o Merge to rmap-12e (Rik van Riel and co)
|merge patch from Nick Orlov
-+ Small fix to the eata driver update (Dario Ballabio)
+* Small fix to the eata driver update (Dario Ballabio)
Linux 2.4.18pre9-ac2
@@ -129,13 +154,13 @@
* Put #error in two files that need FPU fixups (me)
* Correct a specific mmap return to match posix (Christopher Yeoh)
* Add Eepro100/VE ident (Hanno Boeck)
-+ Add provides for DRM to the kernel make rpm (Alexander Hoogerhuis)
+* Add provides for DRM to the kernel make rpm (Alexander Hoogerhuis)
* Fix a problem where vm86 irq releasing could be (Stas Sergeev)
missed
-+ EATA and U14/34F driver updates (Dario Ballabio)
-+ Handle EMC storage arrays that report SCSI-2 (Kurt Garloff)
+* EATA and U14/34F driver updates (Dario Ballabio)
+* Handle EMC storage arrays that report SCSI-2 (Kurt Garloff)
but want REPORT_LUNs
-+ Update README, defconfig, remove autogen files (Niels Jensen)
+* Update README, defconfig, remove autogen files (Niels Jensen)
o Add AFAVLAB PCI serial support (Harald Welte)
* Fix incorrect resource free in eexpress (Gianluca Anzolin)
o Variable size rawio optimisations (Badari Pulavarty)
@@ -149,27 +174,27 @@
o Initial merge of DVD card driver (Christian Wolff,Marcus Metzler)
| This is just an initial testing piece. DVB needs merging
| properly and this is only a first bit of testing
-+ Random number generator support for AMD768 (me)
-+ Add AMD768 to i810 driver pci ident list (me)
+* Random number generator support for AMD768 (me)
+* Add AMD768 to i810 driver pci ident list (me)
o Initial AMD768 power management work (me)
| Unfinished pending some docs clarifications
-+ Fix bugbuf mishandling for modular es1370 (me)
+* Fix bugbuf mishandling for modular es1370 (me)
* Fix up i2o readl abuse, post_wait race, and (me, Arjan van de Ven)
some deadlock cases
* Added cpu_relax to yam driver (me)
* Fixup AMD762 if the BIOS apparently got it wrong(me)
(eg ASUS boards)
* MP1.4 alignment fixup
-+ pcwd cleanup, backport of fixes from 2.5 (Rob Radez)
-+ Add support for more Moxa cards to mxser (Damian Wrobel)
-+/* Add remaining missing MODULE_LICENSE tags (Hubert Mantel)
-+ Fix floppy reservation ranges (Anton Altaparmakov)
-+ Fix max file size setup (Andi Kleen)
+* pcwd cleanup, backport of fixes from 2.5 (Rob Radez)
+* Add support for more Moxa cards to mxser (Damian Wrobel)
+* Add remaining missing MODULE_LICENSE tags (Hubert Mantel)
+* Fix floppy reservation ranges (Anton Altaparmakov)
+* Fix max file size setup (Andi Kleen)
Linux 2.4.18pre7-ac3
o Fix a wrong error return in the megaraid driver (Arjan van de Ven)
* FreeVXFS update (Christoph Hellwig)
-+ Qnxfs update (Anders Larsen)
+* Qnxfs update (Anders Larsen)
o Fix non compile with PCI=n (Adrian Bunk)
o Fix DRM 4.0 non compile in i810 (me)
o Drop out now dead CLONE thread/parent fixup (Dave McCracken)
@@ -181,7 +206,7 @@
o Mark framebuffer mappings VM_IO (Andrew Morton)
o Neomagic frame buffer driver (Denis Kropp)
- Needs FPU code fixing before it can be merged
-+ Hyperthreading awareness for MTRR driver
+* Hyperthreading awareness for MTRR driver
o Correct NR_IRQ with no apic support (Brian Gerst)
* Fix missing includes in sound drivers (Michal Jaegermann)
@@ -196,22 +221,22 @@
* Fix isdn audio compiler behaviour dependancy (Urs Thuermann)
* YAM driver fixes (Jean-Paul Roubelat)
* ROSE protocol stack update/fixes (Jean-Paul Roubelat)
-+ Fix UFS/CDROM oops (Zwane Mwaikambo)
-+ Fix nm256 hang on Dell Latitude (origin unknown)
+* Fix UFS/CDROM oops (Zwane Mwaikambo)
+* Fix nm256 hang on Dell Latitude (origin unknown)
| Please test this tree with other NM256 based boxes and check
| those still work...
o Merge PnPBIOS patch (Thomas Hood, David Hinds, Tom Lees,
Christian Schmidt, ..)
-+ Merge new sis frame buffer drivers (Thomas Winischhofer)
+* Merge new sis frame buffer drivers (Thomas Winischhofer)
* cs46xx oops fix (Mike Gorse)
* Fix a second cs46xx bug related to this (me)
o Fix acpitable oopses on boot and other problems (James Cleverdon)
o Fix io port type on the hpt366 driver (Pete Popov)
-+ Updated matrox drivers (Petr Vandrovec)
+* Updated matrox drivers (Petr Vandrovec)
* IPchains fixes needed for 2.4.18pre7
o IDE config text updates for the IDE patches (Anton Altaparmakov)
-+ Merge the first bits of ZV support (Marcus Metzler)
-+ Add initial ZV support to yenta socket driver (me)
+* Merge the first bits of ZV support (Marcus Metzler)
+* Add initial ZV support to yenta socket driver (me)
for TI cards
* Fix pirq routing on the CS5530 (me)
| Finally the palmax pcmcia/cardbus works properly
prev parent reply other threads:[~2002-03-16 3:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-02 2:09 Linux 2.4.19pre2-ac1 Alan Cox
2002-03-02 2:50 ` Mike Fedyk
2002-03-02 3:56 ` skidley
2002-03-02 4:03 ` Mike Fedyk
2002-03-02 5:22 ` skidley
2002-03-02 18:30 ` Alan Cox
2002-03-16 3:01 ` Mike Fedyk [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020316030137.GC23938@matchmail.com \
--to=mfedyk@matchmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox