From: Andreas Dilger <adilger@clusterfs.com>
To: "Richard B. Johnson" <root@chaos.analogic.com>
Cc: "Randy.Dunlap" <rddunlap@osdl.org>,
Nayyer Tiger <tigerkhan_1@hotmail.com>,
faheemullahkhan101@aol.com, zohair420@hotmail.com,
danish4000@hotmail.com, linux-kernel@vger.kernel.org
Subject: Re: Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help
Date: Mon, 18 Mar 2002 06:53:38 -0700 [thread overview]
Message-ID: <20020318135338.GE1150@turbolinux.com> (raw)
In-Reply-To: <Pine.LNX.4.33L2.0203180809120.2434-100000@dragon.pdx.osdl.net> <Pine.LNX.3.95.1020318112042.740A-100000@chaos.analogic.com>
On Mar 18, 2002 11:36 -0500, Richard B. Johnson wrote:
> According to the standards, where capitalization is used:
> (1) For a proper name.
> (2) To differentiate between otherwise identical symbols.
>
> "KB" would mean:
>
> Kirchoff-Bell
>
> It needs to be:
>
> "kb" to mean kilobyte.
Argh. Not this thread again. "kb" is kilo _bits_ not kilo _bytes_.
Cheers, Andreas
--
Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto,
\ would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- Dogbert
next prev parent reply other threads:[~2002-03-18 17:25 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-18 11:31 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Nayyer Tiger
2002-03-18 16:12 ` Randy.Dunlap
2002-03-18 16:36 ` Richard B. Johnson
2002-03-18 13:53 ` Andreas Dilger [this message]
2002-03-18 17:38 ` Jakob Kemi
2002-03-18 18:24 ` H. Peter Anvin
2002-03-18 18:35 ` Rik van Riel
2002-03-18 19:00 ` Mike Dresser
2002-03-18 19:08 ` Rik van Riel
2002-03-18 19:31 ` Chris Friesen
2002-03-18 22:04 ` Mike Dresser
2002-03-18 22:12 ` Mike Dresser
2002-03-19 11:48 ` Remco Post
2002-03-18 17:04 ` Steven Cole
[not found] <Pine.LNX.4.33.0203181358540.25105-100000@router.windsormac hine.com>
2002-03-19 14:20 ` Pete Cervasio
2002-03-19 14:36 ` Changing KB, MB, and GB to KiB, MiB, and GiB inConfigure.help Chris Friesen
-- strict thread matches above, loose matches on Subject: below --
2002-01-08 21:24 Changing KB, MB, and GB to KiB, MiB, and GiB =?iso-8859-1?q?in Configure=2Ehelp=2E?= Dr. Kelsey Hudson
2002-01-08 21:29 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help H. Peter Anvin
2002-01-08 22:15 ` Dr. Kelsey Hudson
2002-01-08 23:03 ` Timothy Covell
2001-12-23 9:18 Per Jessen
2001-12-23 16:34 ` Stephen Satchell
2001-12-22 23:22 Per Jessen
2001-12-23 7:21 ` Nicholas Knight
2001-12-23 13:35 ` Alan Cox
2001-12-22 8:39 matthew david reuther
2002-01-08 21:18 ` Dr. Kelsey Hudson
2001-12-22 2:51 Thomas Hood
2001-12-21 22:55 Stuart Lynne
2001-12-21 19:55 Per Jessen
[not found] ` <by>
2001-12-22 1:48 ` Timothy Covell
2001-12-22 4:32 ` H. Peter Anvin
2001-12-22 4:49 ` Timothy Covell
2001-12-22 7:57 ` Alan Cox
2001-12-22 18:22 ` Timothy Covell
2001-12-22 19:54 ` Derek Fawcus
2001-12-22 2:11 ` Timothy Covell
2001-12-22 4:44 ` H. Peter Anvin
2001-12-22 4:55 ` M. Edward (Ed) Borasky
2001-12-22 5:29 ` Ryan Cumming
2001-12-22 5:53 ` Timothy Covell
2001-12-22 22:41 ` Changing KB, MB, and GB to KiB, MiB, and GiB in?Configure.help Vojtech Pavlik
2001-12-22 10:53 ` Pekka Pietikäinen
2001-12-21 11:44 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Christian Groessler
2001-12-21 12:50 ` Rene Engelhard
2001-12-21 14:40 ` Reid Hekman
2001-12-21 14:48 ` Rene Engelhard
2001-12-26 19:04 ` Riley Williams
2001-12-21 15:48 ` Mike Jagdis
2001-12-21 16:07 ` Rene Engelhard
2001-12-21 17:43 ` Bob Glamm
2001-12-21 20:50 ` Andreas Ferber
2001-12-20 19:25 RaúlNúñez de Arenas Coronado
2001-12-20 21:41 ` Jamie Lokier
2001-12-21 23:05 ` Rob Landley
2001-12-20 19:13 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.hel p Nicholas Knight
2001-12-20 19:41 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Mike Harrold
2001-12-21 16:59 ` Alan Cox
2001-12-21 17:50 ` Mike Harrold
2001-12-21 18:41 ` Kent Borg
2001-12-21 18:49 ` lk
2001-12-21 19:12 ` Kent Borg
2001-12-22 4:51 ` Albert D. Cahalan
2001-12-20 18:02 Steven Cole
2001-12-20 18:16 ` Matt Bernstein
2001-12-20 18:42 ` Randolph Bentson
2001-12-20 19:00 ` Dave Jones
2001-12-20 19:07 ` Nicholas Knight
2001-12-20 18:47 ` Michael Dunsky
2001-12-20 19:00 ` Timothy Covell
2001-12-21 1:44 ` Stephen Satchell
2001-12-20 18:26 ` Robert Love
2001-12-20 18:52 ` Eric S. Raymond
2001-12-20 19:32 ` Steven Cole
2001-12-20 19:37 ` Eric S. Raymond
2001-12-20 20:40 ` Marc Schiffbauer
2001-12-20 20:32 ` Gábor Lénárt
2001-12-20 21:05 ` Richard B. Johnson
2001-12-20 21:14 ` Gábor Lénárt
2001-12-20 21:25 ` Andreas Dilger
2001-12-20 22:49 ` Mike Eldridge
2001-12-21 10:58 ` Mike Jagdis
2001-12-26 18:59 ` Riley Williams
2002-01-02 17:17 ` Jonathan Amery
2002-01-02 20:17 ` Timothy Covell
2002-01-03 4:23 ` Daniel Phillips
2002-01-03 15:46 ` Timothy Covell
2001-12-24 13:39 ` Lionel Bouton
2001-12-25 11:25 ` Pavel Machek
2001-12-25 20:14 ` Lionel Bouton
2001-12-20 19:49 ` Bernd Eckenfels
2001-12-22 10:24 ` Pozsar Balazs
2001-12-22 10:47 ` Phil Howard
2001-12-24 13:21 ` Ian Molton
2001-12-22 11:30 ` Bernd Eckenfels
2001-12-22 20:18 ` Pozsar Balazs
2001-12-23 5:39 ` Bernd Eckenfels
2001-12-22 16:03 ` Stephen Satchell
2001-12-23 10:43 ` David Woodhouse
2001-12-23 12:00 ` Vojtech Pavlik
2001-12-23 16:24 ` Stephen Satchell
2001-12-24 12:37 ` David Woodhouse
2001-12-28 10:25 ` Kai Henningsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020318135338.GE1150@turbolinux.com \
--to=adilger@clusterfs.com \
--cc=danish4000@hotmail.com \
--cc=faheemullahkhan101@aol.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rddunlap@osdl.org \
--cc=root@chaos.analogic.com \
--cc=tigerkhan_1@hotmail.com \
--cc=zohair420@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox