From: James Mayer <james.mayer@acm.org>
To: linux-kernel@vger.kernel.org
Subject: Re: [bug] 2.4.19-pre4-ac2 hang at boot with ALI15x3 chipset support
Date: Thu, 28 Mar 2002 18:08:55 -0700 [thread overview]
Message-ID: <20020329010855.GA871@opus> (raw)
In-Reply-To: <86387368@toto.iv> <m16qQix-0014LaC@malasada.lava.net>
> James> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> James> hda: drive not ready for command
>
> I ran into this as well under various kernels including 2.4.18. Try
> adding:
> append="idebus=50"
>
> to the lilo stanza for your kernel.
>
> It seems even after I amputated the offending "write" that causes the
> lockup, the bus speed was being set to 33MHz instead of 50Mhz. The
> above solved the problem for me.
This worked for me as well -- interesting.
> For anyone else trying to configure the pcg-c1mrx or pcg-c1mv, I'm
> updating linux configuration document as I work through the
> setup of the various devices:
> http://hale.org/~bhoward/issue_7/pcg-c1mrx.html
Good information there. Oddly enough, I don't need to specify the
pci=conf2, though.
Thanks to everyone for the speedy assistance!
- James
next prev parent reply other threads:[~2002-03-29 1:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <86387368@toto.iv>
2002-03-28 3:37 ` [bug] 2.4.19-pre4-ac2 hang at boot with ALI15x3 chipset support bhoward
2002-03-29 1:08 ` James Mayer [this message]
[not found] <124088188@toto.iv>
2002-03-29 10:01 ` bhoward
2002-03-27 23:38 James Mayer
2002-03-27 23:52 ` Brian D Heaton
2002-03-27 23:59 ` Andre Hedrick
2002-03-28 0:04 ` Alan Cox
2002-03-28 0:21 ` James Mayer
2002-03-28 0:30 ` Andre Hedrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020329010855.GA871@opus \
--to=james.mayer@acm.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox