* 2.5.12 compile error ( e100, Alternate Intel driver )
@ 2002-05-01 11:23 Seiichi Nakashima
2002-05-01 11:43 ` Dave Jones
2002-05-01 19:06 ` Jeff Garzik
0 siblings, 2 replies; 4+ messages in thread
From: Seiichi Nakashima @ 2002-05-01 11:23 UTC (permalink / raw)
To: linux-kernel; +Cc: nakasei
Hi.
I compile 2.5.12 without framebuffer console and boot up fine.
First I use EtherExpressPro/100 support ( e100, Altrenate Intel driver ),
but compile error occured. this driver is default.
I change EtherExpressPro/100 support ( eepro100, original Becker driver ),
then compile and boot up fine.
=== compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===
io_apic.c:221: warning: `move' defined but not used
drivers/net/net.o: In function `e100_diag_config_loopback':
drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
make: *** [vmlinux] Error 1
--------------------------------
Seiichi Nakashima
Email nakasima@kumin.ne.jp
--------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.5.12 compile error ( e100, Alternate Intel driver )
2002-05-01 11:23 2.5.12 compile error ( e100, Alternate Intel driver ) Seiichi Nakashima
@ 2002-05-01 11:43 ` Dave Jones
2002-05-01 12:33 ` Seiichi Nakashima
2002-05-01 19:06 ` Jeff Garzik
1 sibling, 1 reply; 4+ messages in thread
From: Dave Jones @ 2002-05-01 11:43 UTC (permalink / raw)
To: Seiichi Nakashima; +Cc: linux-kernel, nakasei
On Wed, May 01, 2002 at 08:23:11PM +0900, Seiichi Nakashima wrote:
> === compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===
>
> io_apic.c:221: warning: `move' defined but not used
> drivers/net/net.o: In function `e100_diag_config_loopback':
> drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
> make: *** [vmlinux] Error 1
Remove the __devexit tag from e100_phy_reset()'s definition in
drivers/net/e100/e100_phy.c around line 873
I already sent Jeff a patch for this.
--
| Dave Jones. http://www.codemonkey.org.uk
| SuSE Labs
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.5.12 compile error ( e100, Alternate Intel driver )
2002-05-01 11:43 ` Dave Jones
@ 2002-05-01 12:33 ` Seiichi Nakashima
0 siblings, 0 replies; 4+ messages in thread
From: Seiichi Nakashima @ 2002-05-01 12:33 UTC (permalink / raw)
To: Dave Jones; +Cc: linux-kernel
Thanks.
I change drivers/net/e100/e100_phy.c at line 876 from void __devexit to void,
then I change kernel configuration from eepro100 to e100, compile, and boot up fine.
=====
>On Wed, May 01, 2002 at 08:23:11PM +0900, Seiichi Nakashima wrote:
>
> > === compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===
> >
> > io_apic.c:221: warning: `move' defined but not used
> > drivers/net/net.o: In function `e100_diag_config_loopback':
> > drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
> > make: *** [vmlinux] Error 1
>
>Remove the __devexit tag from e100_phy_reset()'s definition in
>drivers/net/e100/e100_phy.c around line 873
>
>I already sent Jeff a patch for this.
>
>--
>| Dave Jones. http://www.codemonkey.org.uk
>| SuSE Labs
>
>
--------------------------------
Seiichi Nakashima
Email nakasima@kumin.ne.jp
--------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.5.12 compile error ( e100, Alternate Intel driver )
2002-05-01 11:23 2.5.12 compile error ( e100, Alternate Intel driver ) Seiichi Nakashima
2002-05-01 11:43 ` Dave Jones
@ 2002-05-01 19:06 ` Jeff Garzik
1 sibling, 0 replies; 4+ messages in thread
From: Jeff Garzik @ 2002-05-01 19:06 UTC (permalink / raw)
To: Seiichi Nakashima; +Cc: linux-kernel, nakasei
Seiichi Nakashima wrote:
>Hi.
>
>I compile 2.5.12 without framebuffer console and boot up fine.
>First I use EtherExpressPro/100 support ( e100, Altrenate Intel driver ),
>but compile error occured. this driver is default.
>I change EtherExpressPro/100 support ( eepro100, original Becker driver ),
>then compile and boot up fine.
>
>=== compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===
>
>io_apic.c:221: warning: `move' defined but not used
>drivers/net/net.o: In function `e100_diag_config_loopback':
>drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
>make: *** [vmlinux] Error 1
>
this has been fixed and the fix has been sent to Linus.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-05-01 19:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-05-01 11:23 2.5.12 compile error ( e100, Alternate Intel driver ) Seiichi Nakashima
2002-05-01 11:43 ` Dave Jones
2002-05-01 12:33 ` Seiichi Nakashima
2002-05-01 19:06 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox