From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 4 May 2002 04:39:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 4 May 2002 04:39:52 -0400 Received: from moutvdomng0.kundenserver.de ([212.227.126.180]:53960 "EHLO moutvdomng0.schlund.de") by vger.kernel.org with ESMTP id ; Sat, 4 May 2002 04:39:52 -0400 Date: Sat, 4 May 2002 10:45:02 +0200 From: Heinz Diehl To: linux-kernel@vger.kernel.org Cc: jamagallon@able.es, andre@linux-ide.org Subject: Re: ide-convert-9 oops on boot Message-ID: <20020504084502.GA979@chiara.cavy.de> Mail-Followup-To: linux-kernel@vger.kernel.org, jamagallon@able.es, andre@linux-ide.org In-Reply-To: <20020504022433.GA1803@werewolf.able.es> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Organization: private site in Mannheim/Germany X-PGP-Key: To get my public-key, send mail with subject 'get pgpkey' User-Agent: Mutt/1.5.1i (Linux 2.4.19-pre7 i586) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sat May 04 2002, J.A. Magallon wrote: > Just patched pre8 with ide-convert-9, and system hangs on boot: Exactly the same thing here. You're not alone ;) [....] Journalled Block Device driver loaded Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DHEA-36481, ATA DISK drive hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive hdc: CD-540E, ATAPI CD/DVD-ROM drive hdd: CD-W54E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33) hdb: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=619/64/63, DMA [....] chiara:~ # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 41) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) 00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) 00:11.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) chiara:~ cat /proc/ide/via ----------VIA BusMastering IDE Configuration---------------- Driver Version: 3.34 South Bridge: VIA vt82c586b Revision: ISA 0x41 IDE 0x6 Highest DMA rate: UDMA33 BM-DMA base: 0xe000 PCI clock: 33.3MHz Master Read Cycle IRDY: 1ws Master Write Cycle IRDY: 1ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: yes yes Post Write Buffer: yes no Enabled: yes yes Simplex only: no no Cable Type: 40w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA DMA UDMA DMA Address Setup: 30ns 30ns 30ns 30ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 90ns 90ns 90ns Data Recovery: 30ns 30ns 30ns 30ns Cycle Time: 60ns 120ns 60ns 120ns Transfer Rate: 33.3MB/s 16.6MB/s 33.3MB/s 16.6MB/s -- # Heinz Diehl, 68259 Mannheim, Germany