From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 11 May 2002 03:40:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 11 May 2002 03:40:49 -0400 Received: from line103-203.adsl.actcom.co.il ([192.117.103.203]:10244 "HELO alhambra.merseine.nu") by vger.kernel.org with SMTP id ; Sat, 11 May 2002 03:40:49 -0400 Date: Sat, 11 May 2002 10:36:50 +0300 From: Muli Ben-Yehuda To: linux-kernel@vger.kernel.org Subject: 3com 3c905cx-tx-nm "unknown device" Message-ID: <20020511103650.A790@actcom.co.il> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I have new 3com PCI NIC, which purpots to be a "3c905cx-tx-nm". The 3c59x module (kernel 2.4.19-pre3-ac2, I'll try -pre8 in a bit) fails to recognize the card. lspci -vx (with the latest pci.ids file) shows: 00:09.0 Ethernet controller: 3Com Corporation: Unknown device ffff (rev 78) Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 6500 [size=128] Expansion ROM at [disabled] [size=128K] Capabilities: [dc] Power Management version 2 00: b7 10 ff ff 07 00 10 02 78 00 00 02 08 40 00 00 10: 01 65 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 1e 3f Donald Becker's vortex-diag program shows: [root@alhambra 3com]# ./vortex-diag -p 0x6500 -t 17 -ee vortex-diag.c:v2.06 4/18/2002 Donald Becker (becker@scyld.com) http://www.scyld.com/diag/index.html Assuming a 3c905C Tornado 100baseTx adapter at 0x6500. EEPROM format 64x16, configuration table at offset 0: ... The word-wide EEPROM checksum is 0000. Saved EEPROM settings of a 3Com Vortex/Boomerang: 3Com Node Address FF:FF:FF:FF:FF:FF (used as a unique ID only). OEM Station address ff:FF:FF:FF:FF:FF (used as the ethernet address). Device ID ffff, Manufacturer ID ffff. Manufacture date (MM/DD/YYYY) 15/31/. A BIOS ROM of size 960Kx8 is expected. Options: force full duplex, link beat check disabled. Vortex format checksum is incorrect (0000 vs. ffff). Cyclone format checksum is incorrect (00 vs. 0xff). Hurricane format checksum is incorrect (00 vs. 0xff). How can I debug this further? Thanks in advance! -- The ill-formed Orange Fails to satisfy the eye: http://vipe.technion.ac.il/~mulix/ Segmentation fault. http://syscalltrack.sf.net/