* 2.5.18 Compile-time Error for Philips USB Video
@ 2002-05-27 17:42 Jonathan B. Horen
2002-05-28 17:53 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan B. Horen @ 2002-05-27 17:42 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 12187 bytes --]
make[3]: Entering directory `/usr/src/linux-2.5.18/drivers/usb/media'
gcc -D__KERNEL__ -I/usr/src/linux-2.5.18/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
-march=i686 -DKBUILD_BASENAME=pwc_if -c -o pwc-if.o pwc-if.c
pwc-if.c: In function `pwc_isoc_init':
pwc-if.c:818: structure has no member named `next'
pwc-if.c: In function `pwc_isoc_cleanup':
pwc-if.c:861: structure has no member named `next'
make[3]: *** [pwc-if.o] Error 1
make[3]: Leaving directory `/usr/src/linux-2.5.18/drivers/usb/media'
make[2]: *** [_subdir_media] Error 2
make[2]: Leaving directory `/usr/src/linux-2.5.18/drivers/usb'
make[1]: *** [_subdir_usb] Error 2
make[1]: Leaving directory `/usr/src/linux-2.5.18/drivers'
make: *** [_dir_drivers] Error 2
root:[84] p /proc/version
Linux version 2.4.18 (root@carla.iucc.ac.il) (gcc version 2.96 20000731
(Red Hat Linux 7.1 2.96-85)) #3 Thu Apr 25 21:00:21 IDT 2002
root:[83] sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux carla.iucc.ac.il 2.4.18 #3 Thu Apr 25 21:00:21 IDT 2002 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
util-linux 2.11f
mount 2.11g
modutils 2.4.13
e2fsprogs 1.26
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.57
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded vmnet vmmon r128 agpgart pwcx-i386 Mvnetd Mvnet
Mvnetint Mvw Mvmouse Mvkbd Mvgic Mvdsp Mserial Mmpip Mmerge mki-adapter
root:[85] p /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 870.383
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 1736.70
root:[86] p /proc/modules
vmnet 17952 2
vmmon 18740 6
r128 84952 1
agpgart 12672 3
pwcx-i386 87104 1
Mvnetd 8676 0 (unused)
Mvnet 51968 0 [Mvnetd]
Mvnetint 216 0 (unused)
Mvw 4172 0 (unused)
Mvmouse 704 0 (unused)
Mvkbd 824 0 (unused)
Mvgic 3160 0 (unused)
Mvdsp 904 0 (unused)
Mserial 5724 0 (unused)
Mmpip 6796 0 (unused)
Mmerge 128636 0 [Mvnetd Mvnet Mvw Mvmouse Mvkbd Mvgic
Mvdsp Mserial Mmpip]
mki-adapter 20048 0 [Mvnetd Mvnet Mvnetint Mvw Mvmouse
Mvkbd Mvgic Mvdsp Mserial Mmpip Mmerge]
root:[105] p /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0778-077a : parport0
0cf8-0cff : PCI conf1
a400-a4ff : Realtek Semiconductor Co., Ltd. RTL-8139
a400-a4ff : 8139too
a800-a83f : Ensoniq 5880 AudioPCI
a800-a83f : es1371
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
b800-b807 : ide0
b808-b80f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : ATI Technologies Inc Rage 128 PF
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
root:[106] p /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-2ffebfff : System RAM
00100000-002472e1 : Kernel code
002472e2-002a4c5f : Kernel data
2ffec000-2ffeefff : ACPI Tables
2ffef000-2fffefff : reserved
2ffff000-2fffffff : ACPI Non-volatile Storage
ea800000-ea8000ff : Realtek Semiconductor Co., Ltd. RTL-8139
ea800000-ea8000ff : 8139too
eb000000-ebefffff : PCI Bus #01
eb000000-eb003fff : ATI Technologies Inc Rage 128 PF
ebf00000-efffffff : PCI Bus #01
ec000000-efffffff : ATI Technologies Inc Rage 128 PF
f0000000-f7ffffff : VIA Technologies, Inc. VT8605 [ProSavage PM133]
ffff0000-ffffffff : reserved
root:[107] lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0605 (rev 81)
Subsystem: Asustek Computer, Inc.: Unknown device 802c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8605 (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: eb000000-ebefffff
Prefetchable memory behind bridge: ebf00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 802c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: D-Link System Inc: Unknown device 1301
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at a400 [size=256]
Region 1: Memory at ea800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at eb000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at ebfe0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
JONATHAN B. HOREN UNIX SYSTEMS ADMINISTRATOR
E: horen@mail.iucc.ac.il Inter-University Computation Center
T: +972-(0)3-640-5203 Tel-Aviv University
F: +972-(0)3-640-9118 Ramat-Aviv 69978 Israel
[-- Attachment #2: .config --]
[-- Type: application/x-java-vm, Size: 16275 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.5.18 Compile-time Error for Philips USB Video
2002-05-27 17:42 2.5.18 Compile-time Error for Philips USB Video Jonathan B. Horen
@ 2002-05-28 17:53 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2002-05-28 17:53 UTC (permalink / raw)
To: Jonathan B. Horen; +Cc: linux-kernel
On Mon, May 27, 2002 at 08:42:34PM +0300, Jonathan B. Horen wrote:
> make[3]: Entering directory `/usr/src/linux-2.5.18/drivers/usb/media'
> gcc -D__KERNEL__ -I/usr/src/linux-2.5.18/include -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
> -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
> -march=i686 -DKBUILD_BASENAME=pwc_if -c -o pwc-if.o pwc-if.c
> pwc-if.c: In function `pwc_isoc_init':
> pwc-if.c:818: structure has no member named `next'
> pwc-if.c: In function `pwc_isoc_cleanup':
> pwc-if.c:861: structure has no member named `next'
Known problem. That field was removed from the struct urb in the USB
core. The driver (and some other USB video drivers) needs to be fixed.
Patches are welcome :)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-05-28 17:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-05-27 17:42 2.5.18 Compile-time Error for Philips USB Video Jonathan B. Horen
2002-05-28 17:53 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox