From: Petr Vandrovec <vandrove@vc.cvut.cz>
To: A Guy Called Tyketto <tyketto@wizard.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5.19 - de4x5 errs on compile
Date: Thu, 30 May 2002 01:44:07 +0200 [thread overview]
Message-ID: <20020529234407.GD12672@ppc.vc.cvut.cz> (raw)
In-Reply-To: <20020529231453.GA31987@wizard.com>
On Wed, May 29, 2002 at 04:14:53PM -0700, A Guy Called Tyketto wrote:
> make[2]: Leaving directory `/usr/src/linux-2.5.15/drivers/media'
> make[2]: Entering directory `/usr/src/linux-2.5.15/drivers/misc'
> make[2]: Nothing to be done for `modules'.
> make[2]: Leaving directory `/usr/src/linux-2.5.15/drivers/misc'
> make[2]: Entering directory `/usr/src/linux-2.5.15/drivers/net'
> make[3]: Entering directory `/usr/src/linux-2.5.15/drivers/net/tulip'
> gcc -D__KERNEL__ -I/usr/src/linux-2.5.15/include -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe
> -mpreferred-stack-boundary=2 -march=i686 -malign-functions=4 -DMODULE
> -DMODVERSIONS -include /usr/src/linux-2.5.15/include/linux/modversions.h
> -DKBUILD_BASENAME=de4x5 -c -o de4x5.o de4x5.c
> de4x5.c:869: redefinition of `struct bus_type'
> make[3]: *** [de4x5.o] Error 1
> make[3]: Leaving directory `/usr/src/linux-2.5.15/drivers/net/tulip'
> make[2]: *** [_modsubdir_tulip] Error 2
> make[2]: Leaving directory `/usr/src/linux-2.5.15/drivers/net'
> make[1]: *** [_modsubdir_net] Error 2
> make[1]: Leaving directory `/usr/src/linux-2.5.15/drivers'
I sent patch below to Linus a hour ago.
Petr Vandrovec
diff -urN linux-2.5.19/drivers/net/tulip/de4x5.c linux-2.5.19/drivers/net/tulip/de4x5.c
--- linux-2.5.19/drivers/net/tulip/de4x5.c Tue May 21 07:07:30 2002
+++ linux-2.5.19/drivers/net/tulip/de4x5.c Thu May 30 00:21:52 2002
@@ -866,7 +866,7 @@
** offsets in the PCI and EISA boards. Also note that the ethernet address
** PROM is accessed differently.
*/
-static struct bus_type {
+static struct de4x5_bus_type {
int bus;
int bus_num;
int device;
@@ -967,10 +967,10 @@
static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec);
static int test_tp(struct net_device *dev, s32 msec);
static int EISA_signature(char *name, s32 eisa_id);
-static int PCI_signature(char *name, struct bus_type *lp);
+static int PCI_signature(char *name, struct de4x5_bus_type *lp);
static void DevicePresent(u_long iobase);
static void enet_addr_rst(u_long aprom_addr);
-static int de4x5_bad_srom(struct bus_type *lp);
+static int de4x5_bad_srom(struct de4x5_bus_type *lp);
static short srom_rd(u_long address, u_char offset);
static void srom_latch(u_int command, u_long address);
static void srom_command(u_int command, u_long address);
@@ -998,7 +998,7 @@
static int get_hw_addr(struct net_device *dev);
static void srom_repair(struct net_device *dev, int card);
static int test_bad_enet(struct net_device *dev, int status);
-static int an_exception(struct bus_type *lp);
+static int an_exception(struct de4x5_bus_type *lp);
#if !defined(__sparc_v9__) && !defined(__powerpc__) && !defined(__alpha__)
static void eisa_probe(struct net_device *dev, u_long iobase);
#endif
@@ -1143,7 +1143,7 @@
static int __init
de4x5_hw_init(struct net_device *dev, u_long iobase, struct pci_dev *pdev)
{
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
int i, status=0;
char *tmp;
@@ -2105,7 +2105,7 @@
u_short vendor;
u32 cfid;
u_long iobase;
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
char name[DE4X5_STRLEN];
if (lastEISA == MAX_EISA_SLOTS) return;/* No more EISA devices to search */
@@ -2186,7 +2186,7 @@
u_short vendor, index, status;
u_int irq = 0, device, class = DE4X5_CLASS_CODE;
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
if (lastPCI == NO_MORE_PCI) return;
@@ -2299,7 +2299,7 @@
u_int irq = 0, device;
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
int i, j;
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
struct list_head *walk = &dev->bus_list;
for (walk = walk->next; walk != &dev->bus_list; walk = walk->next) {
@@ -3992,7 +3992,7 @@
** Look for a particular board name in the PCI configuration space
*/
static int
-PCI_signature(char *name, struct bus_type *lp)
+PCI_signature(char *name, struct de4x5_bus_type *lp)
{
static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
int i, status = 0, siglen = sizeof(de4x5_signatures)/sizeof(c_char *);
@@ -4041,7 +4041,7 @@
DevicePresent(u_long aprom_addr)
{
int i, j=0;
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
if (lp->chipset == DC21040) {
if (lp->bus == EISA) {
@@ -4122,7 +4122,7 @@
u_long iobase = dev->base_addr;
int broken, i, k, tmp, status = 0;
u_short j,chksum;
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
broken = de4x5_bad_srom(lp);
@@ -4203,7 +4203,7 @@
** didn't seem to work here...?
*/
static int
-de4x5_bad_srom(struct bus_type *lp)
+de4x5_bad_srom(struct de4x5_bus_type *lp)
{
int i, status = 0;
@@ -4237,7 +4237,7 @@
static void
srom_repair(struct net_device *dev, int card)
{
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
switch(card) {
case SMC:
@@ -4258,7 +4258,7 @@
static int
test_bad_enet(struct net_device *dev, int status)
{
- struct bus_type *lp = &bus;
+ struct de4x5_bus_type *lp = &bus;
int i, tmp;
for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
@@ -4291,7 +4291,7 @@
** List of board exceptions with correctly wired IRQs
*/
static int
-an_exception(struct bus_type *lp)
+an_exception(struct de4x5_bus_type *lp)
{
if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
(*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
prev parent reply other threads:[~2002-05-29 23:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-29 23:14 2.5.19 - de4x5 errs on compile A Guy Called Tyketto
2002-05-29 23:36 ` Anders Gustafsson
2002-05-29 23:44 ` Petr Vandrovec [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020529234407.GD12672@ppc.vc.cvut.cz \
--to=vandrove@vc.cvut.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=tyketto@wizard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox