* PROBLEM: PS/2 mouse movements cause lock up of all mouse and keyboard input
@ 2002-05-31 6:51 Krzysztof.Dubowik
0 siblings, 0 replies; 3+ messages in thread
From: Krzysztof.Dubowik @ 2002-05-31 6:51 UTC (permalink / raw)
To: rubini; +Cc: linux-kernel
Hello,
I would like to report a kernel problem with PS/2 input.
1. Summary: PS/2 mouse movements cause lock up of all mouse and keyboard input
2. Description: When I move the mouse it gets locked up after a while. Both mouse and keyboard stop to respond. I reckon it is not gpm or XFree related prolem because is occurs with gpm started and XFree stopped and vice-versa. Also 'cat /dev/mouse' results in mouse and keyboard lockup. My computer has no network card so I cannot test if I can access it via network after mouse and keyboard blocks. However I believe it is not a complete kernel freeze because XFree starts the screensaver even if my mouse and keyboard stopped working before.
I wanted to do some kernel debugging, but I had some problem understanding kernel-debug HowTo and I did not know where to start, sorry :( I believe you will need some kernel traces, so please provide me with information of what you need.
3. Keywords: ps/2, mouse
4. Kernel version: 2.4.7-10 (provided with Redhat 7.2), but it also occured with 2.4.7 recompiled by me and 2.4.18 also compiled myself.
5. Environment:
scripts/ver_linux:
Linux localhost.localdomain 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs tune2fs
reiserfsprogs 3.x.0j
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded nls_iso8859-1 nls_cp437 vfat fat binfmt_misc ipchains usb-uhci usbcore
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 400.917
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 799.53
/proc/modules:
nls_iso8859-1 2832 1 (autoclean)
nls_cp437 4352 1 (autoclean)
vfat 9584 1 (autoclean)
fat 32384 0 (autoclean) [vfat]
binfmt_misc 6416 1
ipchains 39200 0
usb-uhci 21536 0 (unused)
usbcore 51712 1 [usb-uhci]
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e000-e01f : usb-uhci
e400-e43f : US Robotics/3Com USR 56k Internal WinModem
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
/proc/iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0dfeffff : System RAM
00100000-0023d5ff : Kernel code
0023d600-002541cb : Kernel data
0dff0000-0dff2fff : ACPI Non-volatile Storage
0dff3000-0dffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : nVidia Corporation NV11
e8000000-ebffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
ec000000-edffffff : PCI Bus #01
ec000000-ecffffff : nVidia Corporation NV11
ee000000-ee00ffff : US Robotics/3Com USR 56k Internal WinModem
ee010000-ee017fff : US Robotics/3Com USR 56k Internal WinModem
ee018000-ee01803f : US Robotics/3Com USR 56k Internal WinModem
ffff0000-ffffffff : reserved
`lspci -vvv`:
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at e000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:14.0 Communication controller: US Robotics/3Com USR 56k Internal WinModem
Subsystem: US Robotics/3Com: Unknown device 00b2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ee018000 (32-bit, prefetchable) [size=64]
Region 1: Memory at ee000000 (32-bit, prefetchable) [size=64K]
Region 2: Memory at ee010000 (32-bit, prefetchable) [size=32K]
Region 3: I/O ports at e400 [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at ed000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
/proc/interrupts;
CPU0
0: 133013 XT-PIC timer
1: 2939 XT-PIC keyboard
2: 0 XT-PIC cascade
6: 39 XT-PIC floppy
8: 1 XT-PIC rtc
9: 0 XT-PIC usb-uhci
12: 28 XT-PIC PS/2 Mouse
14: 20428 XT-PIC ide0
15: 30 XT-PIC ide1
NMI: 0
ERR: 0
/proc/misc:
135 rtc
1 psaux
134 apm_bios
--
Krzysiek
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PROBLEM: PS/2 mouse movements cause lock up of all mouse and keyboard input
[not found] <mailman.1022827980.19905.linux-kernel2news@redhat.com>
@ 2002-05-31 15:41 ` Pete Zaitcev
0 siblings, 0 replies; 3+ messages in thread
From: Pete Zaitcev @ 2002-05-31 15:41 UTC (permalink / raw)
To: Krzysztof.Dubowik; +Cc: linux-kernel
Krzyshtof, one little note: please fold your lines manually,
by hitting Enter at 72 character stops.
> 1. Summary: PS/2 mouse movements cause lock up of all mouse and keyboard input
Does this happen to be a laptop, and if yes, what model?
Is it connected to a docking station?
-- Pete
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: PROBLEM: PS/2 mouse movements cause lock up of all mouse and keyboard input
@ 2002-06-04 19:53 Krzysztof.Dubowik
0 siblings, 0 replies; 3+ messages in thread
From: Krzysztof.Dubowik @ 2002-06-04 19:53 UTC (permalink / raw)
To: zaitcev; +Cc: linux-kernel
> > 1. Summary: PS/2 mouse movements cause lock up of all mouse
> and keyboard input
>
> Does this happen to be a laptop, and if yes, what model?
> Is it connected to a docking station?
No, it's a desktop. It is a Microstar MS-6163 ATX BX13 motherboard based on
Intel 82443BX/PIIX4E chipset.
Best Regards,
--
Krzysiek
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-06-04 19:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <mailman.1022827980.19905.linux-kernel2news@redhat.com>
2002-05-31 15:41 ` PROBLEM: PS/2 mouse movements cause lock up of all mouse and keyboard input Pete Zaitcev
2002-06-04 19:53 Krzysztof.Dubowik
-- strict thread matches above, loose matches on Subject: below --
2002-05-31 6:51 Krzysztof.Dubowik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox