From: Heinz Diehl <hd@cavy.de>
To: linux-kernel@vger.kernel.org
Cc: andre@linux-ide.org
Subject: Re: Linux 2.4.19-pre10-ac2
Date: Thu, 6 Jun 2002 21:21:23 +0200 [thread overview]
Message-ID: <20020606192123.GA197@chiara.cavy.de> (raw)
In-Reply-To: <200206051804.g55I4mK19323@devserv.devel.redhat.com>
On Wed Jun 05 2002, Alan Cox wrote:
> Linux 2.4.19pre10-ac2
[....]
After updating to pre10-ac2, the second harddisk gives the following error
output in dmesg:
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DHEA-36481, ATA DISK drive
hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
hdc: CD-540E, ATAPI CD/DVD-ROM drive
hdd: CD-W54E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33)
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=619/64/63, DMA
Partition check:
[....]
The drive itself works without any problems and is not defective.
All partitions are ext3. Here are the IDE related options from .config:
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y
hdparm -i says:
/dev/hdb:
Model=Conner Peripherals 1275MB - CFS1275A, FwRev=8.32, SerialNo=EV9228R
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=2477/16/63, TrkSize=40887, SectSize=649, ECCbytes=4
BuffType=DualPortCache, BuffSize=64kB, MaxMultSect=16, MultSect=8
CurCHS=2477/16/63, CurSects=2496816, LBA=yes, LBAsects=2496876
IORDY=on/off, tPIO={min:270,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
Kernel Drive Geometry LogicalCHS=619/64/63 PhysicalCHS=2477/16/63
Does anybody know how to fix this/ what's the cause?
Heinz
--
# Heinz Diehl, 68259 Mannheim, Germany
prev parent reply other threads:[~2002-06-06 21:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-05 18:04 Linux 2.4.19-pre10-ac2 Alan Cox
2002-06-05 15:17 ` Arnaldo Carvalho de Melo
2002-06-06 6:09 ` Zwane Mwaikambo
2002-06-06 14:29 ` Arnaldo Carvalho de Melo
2002-06-05 18:19 ` Tomas Szepe
2002-06-05 19:11 ` dean gaudet
2002-06-06 10:11 ` Matt Bernstein
2002-06-06 10:14 ` David S. Miller
2002-06-06 15:00 ` Arnaldo Carvalho de Melo
2002-06-06 12:51 ` Keith Owens
2002-06-06 18:31 ` dean gaudet
2002-06-06 17:45 ` dean gaudet
2002-06-07 8:43 ` Matt Bernstein
2002-06-06 1:18 ` Stephen Rothwell
2002-06-06 19:21 ` Heinz Diehl [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020606192123.GA197@chiara.cavy.de \
--to=hd@cavy.de \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox