From: Lech Szychowski <lech.szychowski@pse.pl>
To: Nick Papadonis <nick@coelacanth.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Arkeia Back + v2.4.18
Date: Sat, 15 Jun 2002 13:27:51 +0200 [thread overview]
Message-ID: <20020615112751.GA27194@lech.pse.pl> (raw)
In-Reply-To: <m38z5jvz2f.fsf@noop.bombay> <20020614144554.GA7428@lech.pse.pl> <m3hek5fw1b.fsf@noop.bombay>
> Are you using the 'free' version?
No, the commercial/licensed 4.2.10-1.
> What type of SCSI controller and SCSI tape drive do you have?
Good old 53c810 rev 01 and Exabyte Mammoth EXB-8900.
The tape shares SCSI bus with one SCSI disk (this
machine is equipped with just one disk, an old Seagate
Barracuda ST32550N). I believe we're sometimes pushing
this hardware up to its limits when backing up fast
machines over a switched 100Mbps. No errors though.
> My problem could be in the AIC7XXXX driver using my 29160 card.
Can't tell, I have never used Arkeia in real world setups
with an Adaptec card. For tests, yes, but not in a prodution
environments.
--
Leszek.
-- lech7@pse.pl 2:480/33.7 -- REAL programmers use INTEGERS --
-- speaking just for myself...
prev parent reply other threads:[~2002-06-15 11:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-13 18:00 Arkeia Back + v2.4.18 Nick Papadonis
2002-06-14 14:45 ` Lech Szychowski
2002-06-14 20:24 ` Nick Papadonis
2002-06-15 11:27 ` Lech Szychowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020615112751.GA27194@lech.pse.pl \
--to=lech.szychowski@pse.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@coelacanth.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox