From: Arnd Bergmann <arnd@bergmann-dalldorf.de>
To: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arndb@de.ibm.com>, Martin Dalecki <martin@dalecki.de>
Subject: 2.5.22 ide disk hang on boot
Date: Tue, 18 Jun 2002 01:41:03 +0200 [thread overview]
Message-ID: <200206172142.XAA19452@post.webmailer.de> (raw)
Hi,
In 2.5.22, I get during the partition detection (2.5.21 was ok):
...
/dev/ide/host0/bus0/target0/lun0: [PTBC] (6201/240/63) p1 p2 p3 <hda: status
error: status = 0x58 [drive ready seek complete data request]
hda: recalibrating
After that, I have to reboot. The machine is an IBM thinkpad A30p, the
ide controller is an ICH3 ("Intel Corp. 82801CAM IDE U100 (rev 1)") and
the drive says it is "IC25T048ATDA05-0".
I tried reverting the last IDE patches but got too many rejects.
After replacing the ata_error that came last with BUG(), I got the
backtrace below (assuming I copied every address correctly from the
screen).
Arnd <><
Trace; c01f9242 <ata_status_poll+92/c8>
Trace; c01fb2d1 <start_request+c5/17c>
Trace; c01eb38a <__elv_next_request+a/10>
Trace; c01fb64e <queue_commands+126/160>
Trace; c01fb6c8 <do_request+40/68>
Trace; c01fb700 <do_ide_request+10/14>
Trace; c01ec2d7 <generic_unplug_device+3b/48>
Trace; c01ec3c0 <blk_run_queues+6c/7c>
Trace; c0137ea9 <block_sync_page+5/8>
Trace; c01273fa <__lock_page+96/c4>
Trace; c012743c <lock_page+14/18>
Trace; c01289e0 <read_cache_page+a8/100>
Trace; c01526fa <read_dev_sector+32/a4>
Trace; c01397d0 <blkdev_readpage+0/14>
Trace; c0152953 <extended_partition+a7/1ec>
Trace; c01175d7 <printk+ff/114>
Trace; c0152dd5 <msdos_partition+179/2c4>
Trace; c01fd0e0 <ata_get_queue+0/2c>
Trace; c01521d4 <check_partition+1b4/230>
Trace; c0139b35 <bdput+8d/94>
Trace; c0152698 <grok_partitions+e4/114>
Trace; c0150300 <statm_pgd_range+15c/1a8>
Trace; c01f9c31 <ata_revalidate+c9/f0>
Trace; c0200c1c <idedisk_attach+d0/e4>
Trace; c01fa358 <subdriver_match+58/68>
Trace; c01fa67f <register_ata_driver+2f/48>
Trace; c0105023 <init+7/124>
Trace; c010701c <kernel_thread+28/38>
next reply other threads:[~2002-06-17 21:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-17 23:41 Arnd Bergmann [this message]
2002-06-18 6:31 ` 2.5.22 ide disk hang on boot Martin Dalecki
2002-06-19 1:32 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2002-06-19 6:12 leif
2002-06-19 7:45 ` Martin Dalecki
2002-06-19 17:01 Leif Sawyer
2002-06-21 14:16 Martin Devera
2002-06-21 14:18 ` Martin Dalecki
2002-06-21 15:12 ` devik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200206172142.XAA19452@post.webmailer.de \
--to=arnd@bergmann-dalldorf.de \
--cc=arndb@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=martin@dalecki.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox