From: Doug Ledford <dledford@redhat.com>
To: Zwane Mwaikambo <zwane@linuxpower.ca>
Cc: Dale Amon <amon@vnl.com>,
linux-kernel@vger.kernel.org, Frank Davis <fdavis@si.rr.com>
Subject: Re: 2.5.26 : drivers/scsi/BusLogic.c
Date: Thu, 18 Jul 2002 21:03:40 -0400 [thread overview]
Message-ID: <20020718210340.A28235@redhat.com> (raw)
In-Reply-To: <Pine.LNX.4.44.0207181815160.29194-100000@linux-box.realnet.co.sz>; from zwane@linuxpower.ca on Thu, Jul 18, 2002 at 06:16:28PM +0200
[-- Attachment #1: Type: text/plain, Size: 1458 bytes --]
On Thu, Jul 18, 2002 at 06:16:28PM +0200, Zwane Mwaikambo wrote:
> On Thu, 18 Jul 2002, Dale Amon wrote:
>
> > BusLogic.c:32: #error Please convert me to Documentation/DMA-mapping.txt
> > BusLogic.c: In function `BusLogic_DetectHostAdapter':
> > BusLogic.c:2841: warning: long unsigned int format, BusLogic_IO_Address_T arg (arg 2)
> > BusLogic.c: In function `BusLogic_QueueCommand':
> > BusLogic.c:3415: structure has no member named `address'
> > BusLogic.c: In function `BusLogic_BIOSDiskParameters':
> > BusLogic.c:4141: warning: implicit declaration of function `scsi_bios_ptable'
> > BusLogic.c:4141: warning: assignment makes pointer from integer without a cast
> > make[2]: *** [BusLogic.o] Error 1
>
> I'm having a look at this, but there seem to be quite a number of
> hindrances. Hopefully i'll have something before next release.
Attached you will find a patch that compiles cleanly, but is totally
untested. Testing would be appreciated. I suspect FlashPoint controllers
*might* have a problem, but MultiMaster (or whatever they are called)
should work properly. WARNING: This could eat a filesystem, it's totally
untested DMA mapping code and I have *no* BusLogic controllers to do any
sort of verifications with. The brave at heart are needed to let me know
if this thing works ;-)
--
Doug Ledford <dledford@redhat.com> 919-754-3700 x44233
Red Hat, Inc.
1801 Varsity Dr.
Raleigh, NC 27606
[-- Attachment #2: BusLogic.patch --]
[-- Type: text/plain, Size: 17562 bytes --]
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.739 -> 1.740
# drivers/scsi/BusLogic.h 1.4 -> 1.5
# drivers/scsi/BusLogic.c 1.6 -> 1.7
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/07/18 dledford@perf50.perf.redhat.com 1.740
# BusLogic.h, BusLogic.c:
# Update to DMA mapping API, take 1
# --------------------------------------------
#
diff -Nru a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
--- a/drivers/scsi/BusLogic.c Thu Jul 18 20:59:47 2002
+++ b/drivers/scsi/BusLogic.c Thu Jul 18 20:59:47 2002
@@ -26,10 +26,8 @@
*/
-#define BusLogic_DriverVersion "2.1.15"
-#define BusLogic_DriverDate "17 August 1998"
-
-#error Please convert me to Documentation/DMA-mapping.txt
+#define BusLogic_DriverVersion "2.1.16"
+#define BusLogic_DriverDate "18 July 2002"
#include <linux/version.h>
#include <linux/module.h>
@@ -48,6 +46,7 @@
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/system.h>
+/* #include <scsi/scsicam.h> This include file is currently busted */
#include "scsi.h"
#include "hosts.h"
#include "sd.h"
@@ -225,15 +224,19 @@
*/
static void BusLogic_InitializeCCBs(BusLogic_HostAdapter_T *HostAdapter,
- void *BlockPointer, int BlockSize)
+ void *BlockPointer, int BlockSize,
+ dma_addr_t BlockPointerHandle)
{
BusLogic_CCB_T *CCB = (BusLogic_CCB_T *) BlockPointer;
+ unsigned int offset = 0;
memset(BlockPointer, 0, BlockSize);
- CCB->AllocationGroupHead = true;
+ CCB->AllocationGroupHead = BlockPointerHandle;
+ CCB->AllocationGroupSize = BlockSize;
while ((BlockSize -= sizeof(BusLogic_CCB_T)) >= 0)
{
CCB->Status = BusLogic_CCB_Free;
CCB->HostAdapter = HostAdapter;
+ CCB->DMA_Handle = (BusLogic_BusAddress_T)BlockPointerHandle + offset;
if (BusLogic_FlashPointHostAdapterP(HostAdapter))
{
CCB->CallbackFunction = BusLogic_QueueCompletedCCB;
@@ -245,6 +248,7 @@
HostAdapter->All_CCBs = CCB;
HostAdapter->AllocatedCCBs++;
CCB++;
+ offset += sizeof(BusLogic_CCB_T);
}
}
@@ -256,19 +260,20 @@
static boolean BusLogic_CreateInitialCCBs(BusLogic_HostAdapter_T *HostAdapter)
{
int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(BusLogic_CCB_T);
+ void *BlockPointer;
+ dma_addr_t BlockPointerHandle;
while (HostAdapter->AllocatedCCBs < HostAdapter->InitialCCBs)
{
- void *BlockPointer = kmalloc(BlockSize,
- (HostAdapter->BounceBuffersRequired
- ? GFP_ATOMIC | GFP_DMA
- : GFP_ATOMIC));
+ BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize,
+ &BlockPointerHandle);
if (BlockPointer == NULL)
{
BusLogic_Error("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n",
HostAdapter);
return false;
}
- BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize);
+ BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize,
+ BlockPointerHandle);
}
return true;
}
@@ -280,14 +285,20 @@
static void BusLogic_DestroyCCBs(BusLogic_HostAdapter_T *HostAdapter)
{
- BusLogic_CCB_T *NextCCB = HostAdapter->All_CCBs, *CCB;
+ BusLogic_CCB_T *NextCCB = HostAdapter->All_CCBs, *CCB, *Last_CCB = NULL;
HostAdapter->All_CCBs = NULL;
HostAdapter->Free_CCBs = NULL;
while ((CCB = NextCCB) != NULL)
{
NextCCB = CCB->NextAll;
if (CCB->AllocationGroupHead)
- kfree(CCB);
+ {
+ if (Last_CCB)
+ pci_free_consistent(HostAdapter->PCI_Device,
+ Last_CCB->AllocationGroupSize, Last_CCB,
+ Last_CCB->AllocationGroupHead);
+ Last_CCB = CCB;
+ }
}
}
@@ -305,15 +316,16 @@
{
int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(BusLogic_CCB_T);
int PreviouslyAllocated = HostAdapter->AllocatedCCBs;
+ void *BlockPointer;
+ dma_addr_t BlockPointerHandle;
if (AdditionalCCBs <= 0) return;
while (HostAdapter->AllocatedCCBs - PreviouslyAllocated < AdditionalCCBs)
{
- void *BlockPointer = kmalloc(BlockSize,
- (HostAdapter->BounceBuffersRequired
- ? GFP_ATOMIC | GFP_DMA
- : GFP_ATOMIC));
+ BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize,
+ &BlockPointerHandle);
if (BlockPointer == NULL) break;
- BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize);
+ BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize,
+ BlockPointerHandle);
}
if (HostAdapter->AllocatedCCBs > PreviouslyAllocated)
{
@@ -379,6 +391,21 @@
static void BusLogic_DeallocateCCB(BusLogic_CCB_T *CCB)
{
BusLogic_HostAdapter_T *HostAdapter = CCB->HostAdapter;
+ if (CCB->Command->use_sg != 0)
+ {
+ pci_unmap_sg(HostAdapter->PCI_Device,
+ (SCSI_ScatterList_T *)CCB->Command->request_buffer,
+ CCB->Command->use_sg,
+ scsi_to_pci_dma_dir(CCB->Command->sc_data_direction));
+ }
+ else if (CCB->Command->request_bufflen != 0)
+ {
+ pci_unmap_single(HostAdapter->PCI_Device, CCB->DataPointer,
+ CCB->DataLength,
+ scsi_to_pci_dma_dir(CCB->Command->sc_data_direction));
+ }
+ pci_unmap_single(HostAdapter->PCI_Device, CCB->SenseDataPointer,
+ CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
CCB->Command = NULL;
CCB->Status = BusLogic_CCB_Free;
CCB->Next = HostAdapter->Free_CCBs;
@@ -643,6 +670,7 @@
ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
ProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
ProbeInfo->IO_Address = IO_Address;
+ ProbeInfo->PCI_Device = NULL;
}
@@ -769,8 +797,8 @@
BusLogic_HostAdapter_T *HostAdapter = PrototypeHostAdapter;
BusLogic_PCIHostAdapterInformation_T PCIHostAdapterInformation;
BusLogic_ModifyIOAddressRequest_T ModifyIOAddressRequest;
- unsigned char Bus = PCI_Device->bus->number;
- unsigned char Device = PCI_Device->devfn >> 3;
+ unsigned char Bus;
+ unsigned char Device;
unsigned int IRQ_Channel;
unsigned long BaseAddress0;
unsigned long BaseAddress1;
@@ -779,7 +807,12 @@
if (pci_enable_device(PCI_Device))
continue;
+
+ if (pci_set_dma_mask(PCI_Device, (u64)0xffffffff))
+ continue;
+ Bus = PCI_Device->bus->number;
+ Device = PCI_Device->devfn >> 3;
IRQ_Channel = PCI_Device->irq;
IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
@@ -889,6 +922,7 @@
PrimaryProbeInfo->Bus = Bus;
PrimaryProbeInfo->Device = Device;
PrimaryProbeInfo->IRQ_Channel = IRQ_Channel;
+ PrimaryProbeInfo->PCI_Device = PCI_Device;
PCIMultiMasterCount++;
}
else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters)
@@ -902,6 +936,7 @@
ProbeInfo->Bus = Bus;
ProbeInfo->Device = Device;
ProbeInfo->IRQ_Channel = IRQ_Channel;
+ ProbeInfo->PCI_Device = PCI_Device;
NonPrimaryPCIMultiMasterCount++;
PCIMultiMasterCount++;
}
@@ -978,13 +1013,21 @@
PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
PCI_Device)) != NULL)
{
- unsigned char Bus = PCI_Device->bus->number;
- unsigned char Device = PCI_Device->devfn >> 3;
- unsigned int IRQ_Channel = PCI_Device->irq;
- BusLogic_IO_Address_T IO_Address = pci_resource_start(PCI_Device, 0);
+ unsigned char Bus;
+ unsigned char Device;
+ unsigned int IRQ_Channel;
+ BusLogic_IO_Address_T IO_Address;
if (pci_enable_device(PCI_Device))
- continue;
+ continue;
+
+ if (pci_set_dma_mask(PCI_Device, (u64)0xffffffff))
+ continue;
+
+ Bus = PCI_Device->bus->number;
+ Device = PCI_Device->devfn >> 3;
+ IRQ_Channel = PCI_Device->irq;
+ IO_Address = pci_resource_start(PCI_Device, 0);
if (IO_Address == 0 || IRQ_Channel == 0) continue;
for (i = 0; i < BusLogic_ProbeInfoCount; i++)
@@ -998,6 +1041,7 @@
ProbeInfo->Bus = Bus;
ProbeInfo->Device = Device;
ProbeInfo->IRQ_Channel = IRQ_Channel;
+ ProbeInfo->PCI_Device = PCI_Device;
break;
}
}
@@ -1025,17 +1069,25 @@
PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
PCI_Device)) != NULL)
{
- unsigned char Bus = PCI_Device->bus->number;
- unsigned char Device = PCI_Device->devfn >> 3;
- unsigned int IRQ_Channel = PCI_Device->irq;
- unsigned long BaseAddress0 = pci_resource_start(PCI_Device, 0);
- unsigned long BaseAddress1 = pci_resource_start(PCI_Device, 1);
- BusLogic_IO_Address_T IO_Address = BaseAddress0;
- BusLogic_PCI_Address_T PCI_Address = BaseAddress1;
+ unsigned char Bus;
+ unsigned char Device;
+ unsigned int IRQ_Channel;
+ unsigned long BaseAddress0;
+ unsigned long BaseAddress1;
+ BusLogic_IO_Address_T IO_Address;
+ BusLogic_PCI_Address_T PCI_Address;
if (pci_enable_device(PCI_Device))
- continue;
+ continue;
+ if (pci_set_dma_mask(PCI_Device, (u64)0xffffffff))
+ continue;
+
+ Bus = PCI_Device->bus->number;
+ Device = PCI_Device->devfn >> 3;
+ IRQ_Channel = PCI_Device->irq;
+ IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
+ PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM)
{
@@ -1080,6 +1132,7 @@
ProbeInfo->Bus = Bus;
ProbeInfo->Device = Device;
ProbeInfo->IRQ_Channel = IRQ_Channel;
+ ProbeInfo->PCI_Device = PCI_Device;
FlashPointCount++;
}
else BusLogic_Warning("BusLogic: Too many Host Adapters "
@@ -2299,6 +2352,16 @@
*/
if (HostAdapter->DMA_ChannelAcquired)
free_dma(HostAdapter->DMA_Channel);
+ /*
+ Release any allocated memory structs not released elsewhere
+ */
+ if (HostAdapter->MailboxSpace)
+ pci_free_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize,
+ HostAdapter->MailboxSpace,
+ HostAdapter->MailboxSpaceHandle);
+ HostAdapter->MailboxSpace = NULL;
+ HostAdapter->MailboxSpaceHandle = 0;
+ HostAdapter->MailboxSize = 0;
}
@@ -2341,6 +2404,12 @@
/*
Initialize the Outgoing and Incoming Mailbox pointers.
*/
+ HostAdapter->MailboxSize = HostAdapter->MailboxCount *
+ (sizeof(BusLogic_OutgoingMailbox_T) + sizeof(BusLogic_IncomingMailbox_T));
+ HostAdapter->MailboxSpace = pci_alloc_consistent(HostAdapter->PCI_Device,
+ HostAdapter->MailboxSize, &HostAdapter->MailboxSpaceHandle);
+ if (HostAdapter->MailboxSpace == NULL)
+ return BusLogic_Failure(HostAdapter, "MAILBOX ALLOCATION");
HostAdapter->FirstOutgoingMailbox =
(BusLogic_OutgoingMailbox_T *) HostAdapter->MailboxSpace;
HostAdapter->LastOutgoingMailbox =
@@ -2351,6 +2420,7 @@
HostAdapter->LastIncomingMailbox =
HostAdapter->FirstIncomingMailbox + HostAdapter->MailboxCount - 1;
HostAdapter->NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
+
/*
Initialize the Outgoing and Incoming Mailbox structures.
*/
@@ -2363,7 +2433,7 @@
*/
ExtendedMailboxRequest.MailboxCount = HostAdapter->MailboxCount;
ExtendedMailboxRequest.BaseMailboxAddress =
- Virtual_to_Bus(HostAdapter->FirstOutgoingMailbox);
+ (BusLogic_BusAddress_T) HostAdapter->MailboxSpaceHandle;
if (BusLogic_Command(HostAdapter, BusLogic_InitializeExtendedMailbox,
&ExtendedMailboxRequest,
sizeof(ExtendedMailboxRequest), NULL, 0) < 0)
@@ -2838,7 +2908,8 @@
HostAdapter->AddressCount,
HostAdapter->FullModelName)) {
printk(KERN_WARNING "BusLogic: Release and re-register of "
- "port 0x%04lx failed \n", HostAdapter->IO_Address);
+ "port 0x%04lx failed \n",
+ (unsigned long)HostAdapter->IO_Address);
BusLogic_DestroyCCBs(HostAdapter);
BusLogic_ReleaseResources(HostAdapter);
BusLogic_UnregisterHostAdapter(HostAdapter);
@@ -3013,6 +3084,13 @@
while ((CompletionCode = NextIncomingMailbox->CompletionCode) !=
BusLogic_IncomingMailboxFree)
{
+ /*
+ We are only allowed to do this because we limit our architectures we
+ run on to machines where bus_to_virt() actually works. There *needs*
+ to be a dma_addr_to_virt() in the new PCI DMA mapping interface to
+ replace bus_to_virt() or else this code is going to become very
+ innefficient.
+ */
BusLogic_CCB_T *CCB = (BusLogic_CCB_T *)
Bus_to_Virtual(NextIncomingMailbox->CCB);
if (CompletionCode != BusLogic_AbortedCommandNotFound)
@@ -3315,7 +3393,7 @@
the Host Adapter is operating asynchronously and the locking code
does not protect against simultaneous access by the Host Adapter.
*/
- NextOutgoingMailbox->CCB = Virtual_to_Bus(CCB);
+ NextOutgoingMailbox->CCB = CCB->DMA_Handle;
NextOutgoingMailbox->ActionCode = ActionCode;
BusLogic_StartMailboxCommand(HostAdapter);
if (++NextOutgoingMailbox > HostAdapter->LastOutgoingMailbox)
@@ -3392,29 +3470,42 @@
/*
Initialize the fields in the BusLogic Command Control Block (CCB).
*/
- if (SegmentCount == 0)
+ if (SegmentCount == 0 && BufferLength != 0)
{
CCB->Opcode = BusLogic_InitiatorCCB;
CCB->DataLength = BufferLength;
- CCB->DataPointer = Virtual_to_Bus(BufferPointer);
+ CCB->DataPointer =
+ pci_map_single(HostAdapter->PCI_Device, BufferPointer, BufferLength,
+ scsi_to_pci_dma_dir(Command->sc_data_direction));
}
- else
+ else if (SegmentCount != 0)
{
SCSI_ScatterList_T *ScatterList = (SCSI_ScatterList_T *) BufferPointer;
- int Segment;
+ int Segment, Count;
+
+ Count = pci_map_sg(HostAdapter->PCI_Device, ScatterList, SegmentCount,
+ scsi_to_pci_dma_dir(Command->sc_data_direction));
CCB->Opcode = BusLogic_InitiatorCCB_ScatterGather;
- CCB->DataLength = SegmentCount * sizeof(BusLogic_ScatterGatherSegment_T);
+ CCB->DataLength = Count * sizeof(BusLogic_ScatterGatherSegment_T);
if (BusLogic_MultiMasterHostAdapterP(HostAdapter))
- CCB->DataPointer = Virtual_to_Bus(CCB->ScatterGatherList);
+ CCB->DataPointer = (unsigned int)CCB->DMA_Handle +
+ ((unsigned int)&CCB->ScatterGatherList -
+ (unsigned int)CCB);
else CCB->DataPointer = Virtual_to_32Bit_Virtual(CCB->ScatterGatherList);
- for (Segment = 0; Segment < SegmentCount; Segment++)
+ for (Segment = 0; Segment < Count; Segment++)
{
CCB->ScatterGatherList[Segment].SegmentByteCount =
- ScatterList[Segment].length;
+ sg_dma_len(ScatterList+Segment);
CCB->ScatterGatherList[Segment].SegmentDataPointer =
- Virtual_to_Bus(ScatterList[Segment].address);
+ sg_dma_address(ScatterList+Segment);
}
}
+ else
+ {
+ CCB->Opcode = BusLogic_InitiatorCCB;
+ CCB->DataLength = BufferLength;
+ CCB->DataPointer = 0;
+ }
switch (CDB[0])
{
case READ_6:
@@ -3440,7 +3531,6 @@
break;
}
CCB->CDB_Length = CDB_Length;
- CCB->SenseDataLength = sizeof(Command->sense_buffer);
CCB->HostAdapterStatus = 0;
CCB->TargetDeviceStatus = 0;
CCB->TargetID = TargetID;
@@ -3507,7 +3597,11 @@
}
}
memcpy(CCB->CDB, CDB, CDB_Length);
- CCB->SenseDataPointer = Virtual_to_Bus(&Command->sense_buffer);
+ CCB->SenseDataLength = sizeof(Command->sense_buffer);
+ CCB->SenseDataPointer = pci_map_single(HostAdapter->PCI_Device,
+ Command->sense_buffer,
+ CCB->SenseDataLength,
+ PCI_DMA_FROMDEVICE);
CCB->Command = Command;
Command->scsi_done = CompletionRoutine;
if (BusLogic_MultiMasterHostAdapterP(HostAdapter))
@@ -4110,6 +4204,7 @@
the BIOS, and a warning may be displayed.
*/
+unsigned char *scsi_bios_ptable(kdev_t);
int BusLogic_BIOSDiskParameters(SCSI_Disk_T *Disk, KernelDevice_T Device,
int *Parameters)
{
diff -Nru a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
--- a/drivers/scsi/BusLogic.h Thu Jul 18 20:59:47 2002
+++ b/drivers/scsi/BusLogic.h Thu Jul 18 20:59:47 2002
@@ -372,6 +372,7 @@
BusLogic_HostAdapterBusType_T HostAdapterBusType;
BusLogic_IO_Address_T IO_Address;
BusLogic_PCI_Address_T PCI_Address;
+ PCI_Device_T *PCI_Device;
unsigned char Bus;
unsigned char Device;
unsigned char IRQ_Channel;
@@ -1192,7 +1193,9 @@
/*
BusLogic Linux Driver Defined Portion.
*/
- boolean AllocationGroupHead;
+ dma_addr_t AllocationGroupHead;
+ unsigned int AllocationGroupSize;
+ BusLogic_BusAddress_T DMA_Handle;
BusLogic_CCB_Status_T Status;
unsigned long SerialNumber;
SCSI_Command_T *Command;
@@ -1356,6 +1359,7 @@
typedef struct BusLogic_HostAdapter
{
SCSI_Host_T *SCSI_Host;
+ PCI_Device_T *PCI_Device;
BusLogic_HostAdapterType_T HostAdapterType;
BusLogic_HostAdapterBusType_T HostAdapterBusType;
BusLogic_IO_Address_T IO_Address;
@@ -1444,9 +1448,13 @@
BusLogic_IncomingMailbox_T *LastIncomingMailbox;
BusLogic_IncomingMailbox_T *NextIncomingMailbox;
BusLogic_TargetStatistics_T TargetStatistics[BusLogic_MaxTargetDevices];
- unsigned char MailboxSpace[BusLogic_MaxMailboxes
+ unsigned char *MailboxSpace;
+ dma_addr_t MailboxSpaceHandle;
+ unsigned int MailboxSize;
+ unsigned long CCB_Offset;
+/* [BusLogic_MaxMailboxes
* (sizeof(BusLogic_OutgoingMailbox_T)
- + sizeof(BusLogic_IncomingMailbox_T))];
+ + sizeof(BusLogic_IncomingMailbox_T))]; */
char MessageBuffer[BusLogic_MessageBufferSize];
}
BusLogic_HostAdapter_T;
next prev parent reply other threads:[~2002-07-19 1:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-18 15:45 2.5.26 : drivers/scsi/BusLogic.c Dale Amon
2002-07-18 16:16 ` Zwane Mwaikambo
2002-07-19 1:03 ` Doug Ledford [this message]
2002-07-19 1:19 ` Doug Ledford
2002-07-19 7:18 ` Michael G. Janicki
2002-07-19 8:41 ` Zwane Mwaikambo
-- strict thread matches above, loose matches on Subject: below --
2002-07-18 17:00 James Bottomley
2002-07-18 23:24 ` Doug Ledford
2002-07-19 14:30 ` stoffel
2002-07-20 15:14 ` Dale Amon
2002-07-25 14:32 ` Dale Amon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020718210340.A28235@redhat.com \
--to=dledford@redhat.com \
--cc=amon@vnl.com \
--cc=fdavis@si.rr.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zwane@linuxpower.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox