From: "Thomas Langås" <tlan@stud.ntnu.no>
To: Patrick Mansfield <patmans@us.ibm.com>
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Linux Kernel 2.4.18 and 2.4.19 problems
Date: Sun, 21 Jul 2002 04:46:33 +0200 [thread overview]
Message-ID: <20020721024633.GA22280@stud.ntnu.no> (raw)
In-Reply-To: <20020719140416.A25577@eng2.beaverton.ibm.com>
Patrick Mansfield:
> Also, cat /proc/scsi/scsi and /proc/scsi/qla*/[0-9] and see what they show.
test3:~# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: DELL Model: PERCRAID Mirror Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: CNSi Model: G7324 Rev: L400
Type: Direct-Access ANSI SCSI revision: 03
test3:~# cat /proc/scsi/qla2200/1
QLogic PCI to Fibre Channel Host Adapter for ISP2100/ISP2200/ISP2200A:
Firmware version: 2.01.35, Driver version 5.31.RH1
Entry address = f8955060
HBA: QLA2200 , Serial# B50409
Request Queue = 0x36300000, Response Queue = 0x36ddc000
Request Queue count= 512, Response Queue count= 64
Number of pending commands = 0x0
Number of queued commands = 0x0
Number of free request entries = 494
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in retry_q = 0
Number of reqs in done_q = 0
Number of pending in_q reqs = 0
Host adapter: state = UP, flags= 0x20a0837
SCSI Device Information:
scsi-qla0-adapter-node=200000e08b02894b;
scsi-qla0-adapter-port=210000e08b02894b;
scsi-qla0-port-0=1000005013d01808:2000005013d01808;
scsi-qla0-port-1=1000005013d016d3:2000005013d016d3;
scsi-qla0-port-2=1000005013d0158d:2000005013d0158d;
scsi-qla0-port-3=1000005013d0154b:2000005013d0154b;
SCSI LUN Information:
(Id:Lun)
( 3: 0): Total reqs 12, Pending 0, Queued 0, full 0, flags 0x0, 0:0:82,
test3:~# cat /proc/scsi/qla2200/2
QLogic PCI to Fibre Channel Host Adapter for ISP2100/ISP2200/ISP2200A:
Firmware version: 2.01.35, Driver version 5.31.RH1
Entry address = f8955060
HBA: QLA2200 , Serial# B50405
Request Queue = 0x362e0000, Response Queue = 0x36d86000
Request Queue count= 512, Response Queue count= 64
Number of pending commands = 0x0
Number of queued commands = 0x0
Number of free request entries = 508
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in retry_q = 0
Number of reqs in done_q = 0
Number of pending in_q reqs = 0
Host adapter: state = UP, flags= 0x20a0837
SCSI Device Information:
scsi-qla1-adapter-node=200000e08b02854b;
scsi-qla1-adapter-port=210000e08b02854b;
scsi-qla1-port-0=1000005013d01808:2000005013d01808;
scsi-qla1-port-1=1000005013d016d3:2000005013d016d3;
scsi-qla1-port-2=1000005013d0158d:2000005013d0158d;
scsi-qla1-port-3=1000005013d0154b:2000005013d0154b;
SCSI LUN Information:
(Id:Lun)
Both controllers should find a disk now, really, but they don't.
Swapping to a newer version of the driver (6.0beta or 6.1beta)
will make it find one drive on each HBA, I'll do that tomorrow
along with logging stuff.
--
Thomas
prev parent reply other threads:[~2002-07-21 2:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-19 19:26 Linux Kernel 2.4.18 and 2.4.19 problems Thomas Langås
2002-07-19 21:04 ` Patrick Mansfield
2002-07-19 21:21 ` Thomas Langås
2002-07-19 21:26 ` Fabio Massimo Di Nitto
2002-07-19 21:44 ` Thomas Langås
2002-07-19 22:36 ` Austin Gonyou
2002-07-19 22:55 ` Thomas Langås
2002-07-25 12:40 ` Bill Davidsen
2002-07-21 2:46 ` Thomas Langås [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020721024633.GA22280@stud.ntnu.no \
--to=tlan@stud.ntnu.no \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=patmans@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox