Re: Re: installation of latest kernel on compaq notebook

Re: Re: installation of latest kernel on compaq notebook

[Enugala Venkata Ramana]

[-- Attachment #1: Type: text/plain, Size: 1066 bytes --]


Hi Greg,
Thanks for response.
here i am attaching the usb_devices listing.
Regards
Venku.


On Thu, 01 Aug 2002 Greg KH wrote :
>On Thu, Aug 01, 2002 at 04:40:26AM -0000, Enugala Venkata Ramana 
>wrote:
> > Hi ,
> >  This is what is existing configuration
> >    have compaq presario 1200 12XL506 model notebook
> >    installed Redhat Linux 7.1
> >    Everything is fine except the usb to ethernet (SmartNic2
> > 1500
> > ) does not work although it is shown in the 
>/proc/usb/devices
>
>Please provide the USB specific information that is asked for in 
>the
>Linux USB FAQ at http://www.linux-usb.org/  That would help us 
>out a lot
>:)
>
>thanks,
>
>greg k-h
>-
>To unsubscribe from this list: send the line "unsubscribe 
>linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  
>http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/

[-- Attachment #2: usb_devices.txt --]
[-- Type: text/plain, Size: 1684 bytes --]

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 99/900 us (11%), #Int=  1, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=1400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=08d1 ProdID=0001 Rev= 2.00
S:  Manufacturer=smartBridges                    
S:  Product=smartNIC PnP Network Adapter    
S:  SerialNumber=????????????????????????????????
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
I:  If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   2 Ivl=  1ms
I:  If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   2 Ivl=  2ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05e3 ProdID=1204 Rev= 1.01
S:  Product=USB Scroll Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 48mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   5 Ivl= 10ms

Re: Re: installation of latest kernel on compaq notebook

[Enugala Venkata Ramana]

[-- Attachment #1: Type: text/plain, Size: 794 bytes --]

Hi Greg,
  Please also find the lspci -v output as well.
Regards
Venku.


On Thu, 01 Aug 2002 Greg KH wrote :
>On Thu, Aug 01, 2002 at 04:40:26AM -0000, Enugala Venkata Ramana 
>wrote:
> > Hi ,
> >  This is what is existing configuration
> >    have compaq presario 1200 12XL506 model notebook
> >    installed Redhat Linux 7.1
> >    Everything is fine except the usb to ethernet (SmartNic2
> > 1500
> > ) does not work although it is shown in the 
>/proc/usb/devices
>
>Please provide the USB specific information that is asked for in 
>the
>Linux USB FAQ at http://www.linux-usb.org/  That would help us 
>out a lot
>:)
>
>thanks,
>
>greg k-h
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/

[-- Attachment #2: lspci_out.txt --]
[-- Type: text/plain, Size: 2978 bytes --]

00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
	Flags: bus master, medium devsel, latency 0
	Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: f4100000-f57fffff

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
	Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
	Flags: bus master, stepping, medium devsel, latency 0

00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
	Flags: bus master, medium devsel, latency 64
	I/O ports at 1420 [size=16]
	Capabilities: [c0] Power Management version 2

00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at 1400 [size=32]
	Capabilities: [80] Power Management version 2

00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
	Flags: medium devsel, IRQ 10
	Capabilities: [68] Power Management version 2

00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 20)
	Subsystem: Compaq Computer Corporation: Unknown device b194
	Flags: medium devsel, IRQ 9
	I/O ports at 1000 [size=256]
	I/O ports at 1434 [size=4]
	I/O ports at 1430 [size=4]
	Capabilities: [c0] Power Management version 2

00:09.0 Communication controller: CONEXANT HSP MicroModem 56K (rev 01)
	Subsystem: Compaq Computer Corporation: Unknown device b195
	Flags: medium devsel, IRQ 11
	Memory at f4000000 (32-bit, non-prefetchable) [size=64K]
	I/O ports at 1438 [size=8]
	Capabilities: [40] Power Management version 2

00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
	Subsystem: Compaq Computer Corporation: Unknown device b103
	Flags: bus master, medium devsel, latency 168, IRQ 9
	Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
	Memory window 0: 10400000-107ff000 (prefetchable)
	Memory window 1: 10800000-10bff000
	I/O window 0: 00001800-000018ff
	I/O window 1: 00001c00-00001cff
	16-bit legacy interface ports at 0001

01:00.0 VGA compatible controller: Trident Microsystems CyberBlade i1 (rev 6a) (prog-if 00 [VGA])
	Subsystem: Compaq Computer Corporation CyberBlade i1 AGP
	Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 64, IRQ 9
	Memory at f5000000 (32-bit, non-prefetchable) [size=8M]
	Memory at f4100000 (32-bit, non-prefetchable) [size=128K]
	Memory at f4800000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [80] AGP version 1.0
	Capabilities: [90] Power Management version 1

Re: Re: installation of latest kernel on compaq notebook

[Greg KH]

On Fri, Aug 02, 2002 at 02:12:13PM -0000, Enugala Venkata Ramana wrote:
> 
> Hi Greg,
> Thanks for response.
> here i am attaching the usb_devices listing.

That device should work just fine with the catc.c driver.  Have you
build that one in your kernel configuration?

thanks,

greg k-h

Re: Re: installation of latest kernel on compaq notebook

[Enugala Venkata Ramana]

Hi ,
Using the make xconfig. i cannot even select it.
Regards
Venku.
On Sat, 03 Aug 2002 Brad Hards wrote :
>On Sat, 3 Aug 2002 14:12, Enugala Venkata Ramana wrote:
> > Hi Greg,
> >   I tried to configure my kernel. But when ever i try with 
>kerel
> > 2.4.xx i always find the catc driver for the usb is not 
>enabled. I
> > cannot add that into my kernel at all.can u please let me 
>know
> > what needs to be done in this is situation and what is the 
>kernal
> > version from which it is been enabled.
>The use of "enabled" is confusing me. You aren't describing
>the problem very well.
>
>Do you mean that you cannot select in when you are doing
>a "make menuconfig" or "make xconfig"?
>
>Or do you mean that you have selected it, but it isn't being
>compiled?
>
>Or do you mean that you have it compiled, but the kernel
>won't boot (or you can't modprobe the module)?
>
>Or do you mean that it boots and the kernel shows
>the catc driver (in /proc/bus/usb/drivers) but the
>device isn't being claimed (as shown in /proc/bus/usb/devices).
>
>Exactly what are you trying to do, and what is happening?
>
>Brad
>
>--
>http://conf.linux.org.au. 22-25Jan2003. Perth, Australia. Birds 
>in Black.

__________________________________________________________
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/

Re: Re: installation of latest kernel on compaq notebook

[Enugala Venkata Ramana]

Thanx Hards,
It worked.
Regards
Venku.

On Sat, 03 Aug 2002 Brad Hards wrote :
>On Sat, 3 Aug 2002 15:09, Enugala Venkata Ramana wrote:
> > Hi ,
> > Using the make xconfig. i cannot even select it.
>I assume that you can select other options, but not
>this particular option (Hint: you could have told me that).
>
>I take it that you didn't look at the options that this
>option depends on, and you need to turn on the
>configuration options for CONFIG_EXPERIMENTAL
>and possibly CONFIG_NET
>
>Brad
>--
>http://conf.linux.org.au. 22-25Jan2003. Perth, Australia. Birds 
>in Black.
>-
>To unsubscribe from this list: send the line "unsubscribe 
>linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  
>http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/

__________________________________________________________
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/