From: Matthew Harrell <lists-sender-14a37a@bittwiddlers.com>
To: Kernel List <linux-kernel@vger.kernel.org>
Subject: USB problem with 2.5.3[0-1]?
Date: Sun, 11 Aug 2002 11:57:13 -0400 [thread overview]
Message-ID: <20020811155713.GA8319@bittwiddlers.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 3728 bytes --]
Using essentially the same config file from 2.5.25 amd 2.5.27 (the last good
working kernels I have) with 2.5.3[0-1] gives me errors trying to use my
USB devices. The relevent parts of the config file are below. The 2.5.25
kernel does this
usb.c: registered new driver usbfs
usb.c: registered new driver hub
...
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.31:USB HID core driver
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.5
mice: PS/2 mouse device common for all mice
...
uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
hcd-pci.c: uhci-hcd @ 00:11.2, VIA Technologies, Inc. UHCI USB
hcd-pci.c: irq 10, io base 00001200
hcd.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found at /
hub.c: 2 ports detected
hub.c: new USB device 00:11.2-2, assigned address 2
hub.c: USB hub found at 2
hub.c: 9 ports detected
hub.c: new USB device 00:11.2-2.3, assigned address 3
hub.c: USB hub found at 2.3
hub.c: 3 ports detected
hub.c: new USB device 00:11.2-2.7, assigned address 4
usb.c: USB device 4 (vend/prod 0x4b3/0x203) is not claimed by any active driver.
hub.c: new USB device 00:11.2-2.8, assigned address 5
input.c: calling /sbin/hotplug input [HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add PRODUCT=3/4b3/4481/100 NAME=IBM IBM PS/2 Keyboard And Mouse I/F]
input: USB HID v1.00 Keyboard [IBM IBM PS/2 Keyboard And Mouse I/F] on usb-00:11.2-2.8
hid-core.c: ctrl urb status -32 received
hid-core.c: usb_submit_urb(ctrl) failed
hub.c: new USB device 00:11.2-2.9, assigned address 6
usb.c: USB device 6 (vend/prod 0x4b3/0x4482) is not claimed by any active driver.
hub.c: new USB device 00:11.2-2.3.1, assigned address 7
input.c: calling /sbin/hotplug input [HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add PRODUCT=3/5ac/201/102 NAME=Alps Electric Apple USB Keyboard]
input: USB HID v1.00 Keyboard [Alps Electric Apple USB Keyboard] on usb-00:11.2-2.3.1
hub.c: new USB device 00:11.2-2.3.3, assigned address 8
input.c: calling /sbin/hotplug input [HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=add PRODUCT=3/46d/c402/210 NAME=Logitech USB-PS/2 Trackball]
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-00:11.2-2.3.3
but the recent kernels do this
usb.c: registered new driver usbfs
usb.c: registered new driver hub
...
uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
hcd-pci.c: uhci-hcd @ 00:11.2, VIA Technologies, Inc. UHCI USB
hcd-pci.c: irq 10, io base 00001200
hcd.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found at 0
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.31:USB HID core driver
mice: PS/2 mouse device common for all mice
...
hub.c: new USB device 00:11.2-2, assigned address 2
hub.c: USB hub found at 2
hub.c: 9 ports detected
hub.c: new USB device 00:11.2-2.3, assigned address 3
hub.c: USB hub found at 2.3
hub.c: 3 ports detected
hub.c: new USB device 00:11.2-2.7, assigned address 4
usb.c: USB device 4 (vend/prod 0x4b3/0x203) is not claimed by any active driver.
hub.c: new USB device 00:11.2-2.8, assigned address 5
hid-core.c: ctrl urb status -32 received
hid-core.c: usb_submit_urb(ctrl) failed
with essentially the same config. How come the later kernel isn't recognizing
the hub and it's devices any more?
--
Matthew Harrell You're just jealous because the
Bit Twiddlers, Inc. voices only talk to me.
mharrell@bittwiddlers.com
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 3446 bytes --]
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD_ALT=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_HID_PID is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
CONFIG_USB_KAWETH=m
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
next reply other threads:[~2002-08-11 15:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-11 15:57 Matthew Harrell [this message]
2002-08-12 17:05 ` USB problem with 2.5.3[0-1]? Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020811155713.GA8319@bittwiddlers.com \
--to=lists-sender-14a37a@bittwiddlers.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mharrell-dated-1029513433.43d927@bittwiddlers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox