recompiling kernel for a Soltek 75drv4

recompiling kernel for a Soltek 75drv4

[Miguel González Castaños]

[-- Attachment #1: Type: text/plain, Size: 1420 bytes --]

Dear all,

 It is my first post to this mailing list, so I am sorry for my English
and the possible mistakes that I could make. I have read through the
information of the FAQs and search a little bit but I have not found an
answer to my question, so here it goes:

 I have a Red Hat 7.2 linux box as a web server. I am still in the
proccess of tuning the system.

 It is a:
 AMD K7 Athlon
 two HD IDE 60 Gbs 
 3Com Network card
 no sound card
 general video card
 Mother board Soltek 75drv4 Chipset VT8367 KT266A

 I am compiling a non-modular kernel, due to I do not have so much
hardware and I have read that this makes the kernel faster. 

 I have executed a lspci to get the information of the mother board
shown above. I have downloaded the latest linux stable kernel 2.4.19 and
I have not found which chipset would be the best to use. 

 By the way I have created a Software RAID-1 with the two IDE hard
drives. 

 My issue is that when I try to shutdown the system I experimented two
things:

 - The system is not shutdown completely, I got a Power down message and
I got to power off the PC.

 - When I reboot the system and even when the system is shutting down, I
have seen messages from the system saying that the RAID is not properly
switched off dued to not a properly shutdowned system.

 I hope I have narrowed enough my question and give enough information
for you guys.

 Many thanks in advance

 Miguel

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: Tarjeta para Miguel González Castaños --]
[-- Type: text/x-vcard; charset=us-ascii; name="mgc.vcf", Size: 174 bytes --]

begin:vcard 
n:González Castaños;Miguel
tel;work:+34 983 36 79 57
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
email;internet:mgc@tid.es
fn:Miguel González Castaños
end:vcard

Re: recompiling kernel for a Soltek 75drv4

[Jose Luis Domingo Lopez]

On Monday, 02 September 2002, at 10:07:53 +0200,
Miguel González Castaños wrote:

>  - The system is not shutdown completely, I got a Power down message and
> I got to power off the PC.
> 
You must have either APM or ACPI support compiled into the kernel to get
your motherboard switch the power off. I have a Soltek SL-75DRV2 and it
works fine with respect to power down.

Hope it helps.

-- 
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Woody (Linux 2.4.19-pre6aa1)