From: mbs <mbs@mc.com>
To: Andre Hedrick <andre@linux-ide.org>, Mike Isely <isely@pobox.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: 2.4.20-pre4-ac1 trashed my system
Date: Tue, 3 Sep 2002 08:41:40 -0400 [thread overview]
Message-ID: <200209031237.IAA27024@mc.com> (raw)
In-Reply-To: <Pine.LNX.4.10.10208302313040.1033-100000@master.linux-ide.org>
it trashed mine also.
supermicro p4dp8-g2 mobo
2x 2.2 Xeon
e7500 chipset
wd400 40gb hd
2.4.20-pre4-ac2 + RML preempt patch (applied cleanly)
boot it and eveything runs fine for a short while, then I start getting "bad
CRC" errors and "seek failure" errors.
I have had this problem with both ext2 and ext3
initially I thought it was a bad HD, so I installed a new one on a new cable
and did a complete rh7.3 install ran for a while eith no problems then built
the same kernel over again, rebooted into the new kernel and within seconds
was having problems again.
2.4.19-rc3-ac4 +rml preempt has been dead stable, as has (so far) 2.4.29-ac4
+rml and RH 2.4.18-3 and -5
I am not doing anything funky with hd setup, not even specifying idebus=
this has happened with 40 and 80 wire cables.
if there is any additional info I can provide please let me know.
--
/**************************************************
** Mark Salisbury || mbs@mc.com **
** If you would like to sponsor me for the **
** Mass Getaway, a 150 mile bicycle ride to for **
** MS, contact me to donate by cash or check or **
** click the link below to donate by credit card **
**************************************************/
https://www.nationalmssociety.org/pledge/pledge.asp?participantid=86736
next prev parent reply other threads:[~2002-09-03 12:34 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-29 14:06 2.4.20-pre4-ac1 trashed my system Mike Isely
2002-08-29 15:32 ` Alan Cox
2002-08-29 17:15 ` Andre Hedrick
2002-08-29 18:02 ` Mike Isely
2002-08-29 19:15 ` Mike Isely
2002-08-29 19:28 ` Alan Cox
2002-08-29 19:32 ` Mike Isely
2002-08-30 7:07 ` Mike Isely
2002-08-31 5:04 ` Mike Isely
2002-08-31 5:57 ` Andre Hedrick
2002-08-31 6:07 ` Mike Isely
2002-08-31 6:24 ` Andre Hedrick
2002-08-31 6:57 ` Mike Isely
2002-09-01 5:15 ` Mike Isely
2002-09-02 8:19 ` Joachim Breuer
2002-09-05 6:05 ` Mike Isely
2002-09-02 8:16 ` Joachim Breuer
2002-09-03 12:41 ` mbs [this message]
2002-09-03 14:34 ` Mike Isely
2002-09-03 16:00 ` Alan Cox
2002-09-04 10:21 ` Rogier Wolff
2002-09-03 15:59 ` Alan Cox
2002-09-03 18:33 ` mbs
2002-09-01 2:59 ` Mike Isely
2002-08-31 10:54 ` Vojtech Pavlik
2002-09-05 5:54 ` [PATCH] 2.4.20-pre5-ac2: Promise Controller LBA48 DMA fixed Mike Isely
2002-09-05 12:47 ` Henning P. Schmiedehausen
2002-09-05 14:12 ` Mike Isely
2002-09-05 14:31 ` Alan Cox
2002-09-05 14:33 ` Mike Isely
2002-09-05 14:35 ` Horst von Brand
2002-09-05 14:47 ` Mike Isely
2002-09-05 14:56 ` Tomas Szepe
2002-09-05 15:12 ` Mike Isely
2002-09-05 14:41 ` Tomas Szepe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200209031237.IAA27024@mc.com \
--to=mbs@mc.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andre@linux-ide.org \
--cc=isely@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox