From: Jurriaan <thunder7@xs4all.nl>
To: linux-kernel@vger.kernel.org
Subject: ide-scsi problems (identical) in 2.5.38 and 2.4.20-pre7-ac3: CoD != 0 in idescsi_pc_intr
Date: Sun, 22 Sep 2002 08:55:04 +0200 [thread overview]
Message-ID: <20020922065504.GA1009@middle.of.nowhere> (raw)
selected parts of dmesg:
hdg: LITE-ON LTR-40125W, ATAPI CD/DVD-ROM drive
ide-cd: passing drive hdg to ide-scsi emulation.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-40125W Rev: WS05
Type: CD-ROM ANSI SCSI revision: 02
sr3: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
After writing for a while, it says:
ide-scsi: CoD != 0 in idescsi_pc_intr
hdg: ATAPI reset complete
and cdrdao mentions:
sudo cdrdao simulate --device 1,0,0 --driver generic-mmc --speed 12 test.cue
Cdrdao version 1.1.5 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
L-EC encoding library - (C) Heiko Eissfeldt
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.5'
1,0,0: LITE-ON LTR-40125W Rev: WS05
Using driver: Generic SCSI-3/MMC - Version 1.2 (options 0x0000)
Starting write simulation at speed 12...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
Writing track 01 (mode MODE2_RAW/MODE2_RAW)...
Writing track 02 (mode MODE2_RAW/MODE2_RAW)...
?: Input/output error. : scsi sendcmd: no error
CDB: 2A 00 00 01 58 88 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 3.160s timeout 180s
ERROR: Write data failed.
ERROR: Writing failed - buffer under run?
ERROR: Simulation failed.
Both 2.4.20-pre7-ac3 and 2.5.38 fail in this way.
Kind regards,
Jurriaan
--
Lightspeed is too slow. We're going to have to go right to Ludicrous Speed.
Spaceballs - The Movie
GNU/Linux 2.5.37 SMP/ReiserFS 2x1380 bogomips load av: 0.18 0.74 0.57
next reply other threads:[~2002-09-22 6:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-22 6:55 Jurriaan [this message]
2002-09-22 18:07 ` ide-scsi problems (identical) in 2.5.38 and 2.4.20-pre7-ac3: CoD != 0 in idescsi_pc_intr Thomas Molina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020922065504.GA1009@middle.of.nowhere \
--to=thunder7@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox